H.  Peter Anvin doesn't like huge zero page which sticks in memory forever
after the first allocation.  Here's implementation of lockless refcounting
for huge zero page.

We have two basic primitives: {get,put}_huge_zero_page(). They
manipulate reference counter.

If counter is 0, get_huge_zero_page() allocates a new huge page and takes
two references: one for caller and one for shrinker.  We free the page
only in shrinker callback if counter is 1 (only shrinker has the
reference).

put_huge_zero_page() only decrements counter.  Counter is never zero in
put_huge_zero_page() since shrinker holds on reference.

Freeing huge zero page in shrinker callback helps to avoid frequent
allocate-free.

Refcounting has cost.  On 4 socket machine I observe ~1% slowdown on
parallel (40 processes) read page faulting comparing to lazy huge page
allocation.  I think it's pretty reasonable for synthetic benchmark.

[lliubbo@gmail.com: fix mismerge]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of allocating huge zero page on hugepage_init() we can postpone it
until first huge zero page map. It saves memory if THP is not in use.

cmpxchg() is used to avoid race on huge_zero_pfn initialization.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All code paths seems covered. Now we can map huge zero page on read page
fault.

We setup it in do_huge_pmd_anonymous_page() if area around fault address
is suitable for THP and we've got read page fault.

If we fail to setup huge zero page (ENOMEM) we fallback to
handle_pte_fault() as we normally do in THP.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can't split huge zero page itself (and it's bug if we try), but we
can split the pmd which points to it.

On splitting the pmd we create a table with all ptes set to normal zero
page.

[akpm@linux-foundation.org: fix build error]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pass vma instead of mm and add address parameter.

In most cases we already have vma on the stack. We provides
split_huge_page_pmd_mm() for few cases when we have mm, but not vma.

This change is preparation to huge zero pmd splitting implementation.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mprotect core never tries to make page writable using change_huge_pmd().
Let's add an assert that the assumption is true.  It's important to be
sure we will not make huge zero page writable.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On write access to huge zero page we alloc a new huge page and clear it.

If ENOMEM, graceful fallback: we create a new pmd table and set pte around
fault address to newly allocated normal (4k) page.  All other ptes in the
pmd set to normal zero page.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's easy to copy huge zero page. Just set destination pmd to huge zero
page.

It's safe to copy huge zero page since we have none yet :-p

[rientjes@google.com: fix comment]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't have a mapped page to zap in huge zero page case.  Let's just clear
pmd and remove it from tlb.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During testing I noticed big (up to 2.5 times) memory consumption overhead
on some workloads (e.g.  ft.A from NPB) if THP is enabled.

The main reason for that big difference is lacking zero page in THP case.
We have to allocate a real page on read page fault.

A program to demonstrate the issue:
#include <assert.h>
#include <stdlib.h>
#include <unistd.h>

#define MB 1024*1024

int main(int argc, char **argv)
{
        char *p;
        int i;

        posix_memalign((void **)&p, 2 * MB, 200 * MB);
        for (i = 0; i < 200 * MB; i+= 4096)
                assert(p[i] == 0);
        pause();
        return 0;
}

With thp-never RSS is about 400k, but with thp-always it's 200M.  After
the patcheset thp-always RSS is 400k too.

Design overview.

Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled with
zeros.  The way how we allocate it changes in the patchset:

- [01/10] simplest way: hzp allocated on boot time in hugepage_init();
- [09/10] lazy allocation on first use;
- [10/10] lockless refcounting + shrinker-reclaimable hzp;

We setup it in do_huge_pmd_anonymous_page() if area around fault address
is suitable for THP and we've got read page fault.  If we fail to setup
hzp (ENOMEM) we fallback to handle_pte_fault() as we normally do in THP.

On wp fault to hzp we allocate real memory for the huge page and clear it.
 If ENOMEM, graceful fallback: we create a new pmd table and set pte
around fault address to newly allocated normal (4k) page.  All other ptes
in the pmd set to normal zero page.

We cannot split hzp (and it's bug if we try), but we can split the pmd
which points to it.  On splitting the pmd we create a table with all ptes
set to normal zero page.

===

By hpa's request I've tried alternative approach for hzp implementation
(see Virtual huge zero page patchset): pmd table with all entries set to
zero page.  This way should be more cache friendly, but it increases TLB
pressure.

The problem with virtual huge zero page: it requires per-arch enabling.
We need a way to mark that pmd table has all ptes set to zero page.

Some numbers to compare two implementations (on 4s Westmere-EX):

Mirobenchmark1
==============

test:
        posix_memalign((void **)&p, 2 * MB, 8 * GB);
        for (i = 0; i < 100; i++) {
                assert(memcmp(p, p + 4*GB, 4*GB) == 0);
                asm volatile ("": : :"memory");
        }

hzp:
 Performance counter stats for './test_memcmp' (5 runs):

      32356.272845 task-clock                #    0.998 CPUs utilized            ( +-  0.13% )
                40 context-switches          #    0.001 K/sec                    ( +-  0.94% )
                 0 CPU-migrations            #    0.000 K/sec
             4,218 page-faults               #    0.130 K/sec                    ( +-  0.00% )
    76,712,481,765 cycles                    #    2.371 GHz                      ( +-  0.13% ) [83.31%]
    36,279,577,636 stalled-cycles-frontend   #   47.29% frontend cycles idle     ( +-  0.28% ) [83.35%]
     1,684,049,110 stalled-cycles-backend    #    2.20% backend  cycles idle     ( +-  2.96% ) [66.67%]
   134,355,715,816 instructions              #    1.75  insns per cycle
                                             #    0.27  stalled cycles per insn  ( +-  0.10% ) [83.35%]
    13,526,169,702 branches                  #  418.039 M/sec                    ( +-  0.10% ) [83.31%]
         1,058,230 branch-misses             #    0.01% of all branches          ( +-  0.91% ) [83.36%]

      32.413866442 seconds time elapsed                                          ( +-  0.13% )

vhzp:
 Performance counter stats for './test_memcmp' (5 runs):

      30327.183829 task-clock                #    0.998 CPUs utilized            ( +-  0.13% )
                38 context-switches          #    0.001 K/sec                    ( +-  1.53% )
                 0 CPU-migrations            #    0.000 K/sec
             4,218 page-faults               #    0.139 K/sec                    ( +-  0.01% )
    71,964,773,660 cycles                    #    2.373 GHz                      ( +-  0.13% ) [83.35%]
    31,191,284,231 stalled-cycles-frontend   #   43.34% frontend cycles idle     ( +-  0.40% ) [83.32%]
       773,484,474 stalled-cycles-backend    #    1.07% backend  cycles idle     ( +-  6.61% ) [66.67%]
   134,982,215,437 instructions              #    1.88  insns per cycle
                                             #    0.23  stalled cycles per insn  ( +-  0.11% ) [83.32%]
    13,509,150,683 branches                  #  445.447 M/sec                    ( +-  0.11% ) [83.34%]
         1,017,667 branch-misses             #    0.01% of all branches          ( +-  1.07% ) [83.32%]

      30.381324695 seconds time elapsed                                          ( +-  0.13% )

Mirobenchmark2
==============

test:
        posix_memalign((void **)&p, 2 * MB, 8 * GB);
        for (i = 0; i < 1000; i++) {
                char *_p = p;
                while (_p < p+4*GB) {
                        assert(*_p == *(_p+4*GB));
                        _p += 4096;
                        asm volatile ("": : :"memory");
                }
        }

hzp:
 Performance counter stats for 'taskset -c 0 ./test_memcmp2' (5 runs):

       3505.727639 task-clock                #    0.998 CPUs utilized            ( +-  0.26% )
                 9 context-switches          #    0.003 K/sec                    ( +-  4.97% )
             4,384 page-faults               #    0.001 M/sec                    ( +-  0.00% )
     8,318,482,466 cycles                    #    2.373 GHz                      ( +-  0.26% ) [33.31%]
     5,134,318,786 stalled-cycles-frontend   #   61.72% frontend cycles idle     ( +-  0.42% ) [33.32%]
     2,193,266,208 stalled-cycles-backend    #   26.37% backend  cycles idle     ( +-  5.51% ) [33.33%]
     9,494,670,537 instructions              #    1.14  insns per cycle
                                             #    0.54  stalled cycles per insn  ( +-  0.13% ) [41.68%]
     2,108,522,738 branches                  #  601.451 M/sec                    ( +-  0.09% ) [41.68%]
           158,746 branch-misses             #    0.01% of all branches          ( +-  1.60% ) [41.71%]
     3,168,102,115 L1-dcache-loads
          #  903.693 M/sec                    ( +-  0.11% ) [41.70%]
     1,048,710,998 L1-dcache-misses
         #   33.10% of all L1-dcache hits    ( +-  0.11% ) [41.72%]
     1,047,699,685 LLC-load
                 #  298.854 M/sec                    ( +-  0.03% ) [33.38%]
             2,287 LLC-misses
               #    0.00% of all LL-cache hits     ( +-  8.27% ) [33.37%]
     3,166,187,367 dTLB-loads
               #  903.147 M/sec                    ( +-  0.02% ) [33.35%]
         4,266,538 dTLB-misses
              #    0.13% of all dTLB cache hits   ( +-  0.03% ) [33.33%]

       3.513339813 seconds time elapsed                                          ( +-  0.26% )

vhzp:
 Performance counter stats for 'taskset -c 0 ./test_memcmp2' (5 runs):

      27313.891128 task-clock                #    0.998 CPUs utilized            ( +-  0.24% )
                62 context-switches          #    0.002 K/sec                    ( +-  0.61% )
             4,384 page-faults               #    0.160 K/sec                    ( +-  0.01% )
    64,747,374,606 cycles                    #    2.370 GHz                      ( +-  0.24% ) [33.33%]
    61,341,580,278 stalled-cycles-frontend   #   94.74% frontend cycles idle     ( +-  0.26% ) [33.33%]
    56,702,237,511 stalled-cycles-backend    #   87.57% backend  cycles idle     ( +-  0.07% ) [33.33%]
    10,033,724,846 instructions              #    0.15  insns per cycle
                                             #    6.11  stalled cycles per insn  ( +-  0.09% ) [41.65%]
     2,190,424,932 branches                  #   80.195 M/sec                    ( +-  0.12% ) [41.66%]
         1,028,630 branch-misses             #    0.05% of all branches          ( +-  1.50% ) [41.66%]
     3,302,006,540 L1-dcache-loads
          #  120.891 M/sec                    ( +-  0.11% ) [41.68%]
       271,374,358 L1-dcache-misses
         #    8.22% of all L1-dcache hits    ( +-  0.04% ) [41.66%]
        20,385,476 LLC-load
                 #    0.746 M/sec                    ( +-  1.64% ) [33.34%]
            76,754 LLC-misses
               #    0.38% of all LL-cache hits     ( +-  2.35% ) [33.34%]
     3,309,927,290 dTLB-loads
               #  121.181 M/sec                    ( +-  0.03% ) [33.34%]
     2,098,967,427 dTLB-misses
              #   63.41% of all dTLB cache hits   ( +-  0.03% ) [33.34%]

      27.364448741 seconds time elapsed                                          ( +-  0.24% )

===

I personally prefer implementation present in this patchset. It doesn't
touch arch-specific code.

This patch:

Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled with
zeros.

For now let's allocate the page on hugepage_init().  We'll switch to lazy
allocation later.

We are not going to map the huge zero page until we can handle it properly
on all code paths.

is_huge_zero_{pfn,pmd}() functions will be used by following patches to
check whether the pfn/pmd is huge zero page.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On x86 memory accesses to pages without the ACCESSED flag set result in
the ACCESSED flag being set automatically.  With the ARM architecture a
page access fault is raised instead (and it will continue to be raised
until the ACCESSED flag is set for the appropriate PTE/PMD).

For normal memory pages, handle_pte_fault will call pte_mkyoung
(effectively setting the ACCESSED flag).  For transparent huge pages,
pmd_mkyoung will only be called for a write fault.

This patch ensures that faults on transparent hugepages which do not
result in a CoW update the access flags for the faulting pmd.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce mk_huge_pmd() to simplify the code
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Multiple places do the same check.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several place need to find the pmd by(mm_struct, address), so introduce a
function to simplify it.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are duplicated places using release_pte_pages().
And release_all_pte_pages() can be removed.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Certain configurations won't implicitly pull in <linux/pagemap.h> resulting
in the following build error:

  mm/huge_memory.c: In function 'release_pte_page':
  mm/huge_memory.c:1697:2: error: implicit declaration of function 'unlock_page' [-Werror=implicit-function-declaration]
  mm/huge_memory.c: In function '__collapse_huge_page_isolate':
  mm/huge_memory.c:1757:3: error: implicit declaration of function 'trylock_page' [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors
Reported-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Invalidation sequences are handled in various ways on various
architectures.

One way, which sparc64 uses, is to let the set_*_at() functions accumulate
pending flushes into a per-cpu array.  Then the flush_tlb_range() et al.
calls process the pending TLB flushes.

In this regime, the __tlb_remove_*tlb_entry() implementations are
essentially NOPs.

The canonical PTE zap in mm/memory.c is:

			ptent = ptep_get_and_clear_full(mm, addr, pte,
							tlb->fullmm);
			tlb_remove_tlb_entry(tlb, pte, addr);

With a subsequent tlb_flush_mmu() if needed.

Mirror this in the THP PMD zapping using:

		orig_pmd = pmdp_get_and_clear(tlb->mm, addr, pmd);
		page = pmd_page(orig_pmd);
		tlb_remove_pmd_tlb_entry(tlb, pmd, addr);

And we properly accomodate TLB flush mechanims like the one described
above.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The transparent huge page code passes a PMD pointer in as the third
argument of update_mmu_cache(), which expects a PTE pointer.

This never got noticed because X86 implements update_mmu_cache() as a
macro and thus we don't get any type checking, and X86 is the only
architecture which supports transparent huge pages currently.

Before other architectures can support transparent huge pages properly we
need to add a new interface which will take a PMD pointer as the third
argument rather than a PTE pointer.

[akpm@linux-foundation.org: implement update_mm_cache_pmd() for s390]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a transparent hugepage is mapped and it is included in an mlock()
range, follow_page() incorrectly avoids setting the page's mlock bit and
moving it to the unevictable lru.

This is evident if you try to mlock(), munlock(), and then mlock() a
range again.  Currently:

	#define MAP_SIZE	(4 << 30)	/* 4GB */

	void *ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
			 MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
	mlock(ptr, MAP_SIZE);

		$ grep -E "Unevictable|Inactive\(anon" /proc/meminfo
		Inactive(anon):     6304 kB
		Unevictable:     4213924 kB

	munlock(ptr, MAP_SIZE);

		Inactive(anon):  4186252 kB
		Unevictable:       19652 kB

	mlock(ptr, MAP_SIZE);

		Inactive(anon):  4198556 kB
		Unevictable:       21684 kB

Notice that less than 2MB was added to the unevictable list; this is
because these pages in the range are not transparent hugepages since the
4GB range was allocated with mmap() and has no specific alignment.  If
posix_memalign() were used instead, unevictable would not have grown at
all on the second mlock().

The fix is to call mlock_vma_page() so that the mlock bit is set and the
page is added to the unevictable list.  With this patch:

	mlock(ptr, MAP_SIZE);

		Inactive(anon):     4056 kB
		Unevictable:     4213940 kB

	munlock(ptr, MAP_SIZE);

		Inactive(anon):  4198268 kB
		Unevictable:       19636 kB

	mlock(ptr, MAP_SIZE);

		Inactive(anon):     4008 kB
		Unevictable:     4213940 kB
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to allow sleeping during mmu notifier calls, we need to avoid
invoking them under the page table spinlock.  This patch solves the
problem by calling invalidate_page notification after releasing the lock
(but before freeing the page itself), or by wrapping the page invalidation
with calls to invalidate_range_begin and invalidate_range_end.

To prevent accidental changes to the invalidate_range_end arguments after
the call to invalidate_range_begin, the patch introduces a convention of
saving the arguments in consistently named locals:

	unsigned long mmun_start;	/* For mmu_notifiers */
	unsigned long mmun_end;	/* For mmu_notifiers */

	...

	mmun_start = ...
	mmun_end = ...
	mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);

	...

	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);

The patch changes code to use this convention for all calls to
mmu_notifier_invalidate_range_start/end, except those where the calls are
close enough so that anyone who glances at the code can see the values
aren't changing.

This patchset is a preliminary step towards on-demand paging design to be
added to the RDMA stack.

Why do we want on-demand paging for Infiniband?

  Applications register memory with an RDMA adapter using system calls,
  and subsequently post IO operations that refer to the corresponding
  virtual addresses directly to HW.  Until now, this was achieved by
  pinning the memory during the registration calls.  The goal of on demand
  paging is to avoid pinning the pages of registered memory regions (MRs).
   This will allow users the same flexibility they get when swapping any
  other part of their processes address spaces.  Instead of requiring the
  entire MR to fit in physical memory, we can allow the MR to be larger,
  and only fit the current working set in physical memory.

Why should anyone care?  What problems are users currently experiencing?

  This can make programming with RDMA much simpler.  Today, developers
  that are working with more data than their RAM can hold need either to
  deregister and reregister memory regions throughout their process's
  life, or keep a single memory region and copy the data to it.  On demand
  paging will allow these developers to register a single MR at the
  beginning of their process's life, and let the operating system manage
  which pages needs to be fetched at a given time.  In the future, we
  might be able to provide a single memory access key for each process
  that would provide the entire process's address as one large memory
  region, and the developers wouldn't need to register memory regions at
  all.

Is there any prospect that any other subsystems will utilise these
infrastructural changes?  If so, which and how, etc?

  As for other subsystems, I understand that XPMEM wanted to sleep in
  MMU notifiers, as Christoph Lameter wrote at
  http://lkml.indiana.edu/hypermail/linux/kernel/0802.1/0460.html and
  perhaps Andrea knows about other use cases.

  Scheduling in mmu notifications is required since we need to sync the
  hardware with the secondary page tables change.  A TLB flush of an IO
  device is inherently slower than a CPU TLB flush, so our design works by
  sending the invalidation request to the device, and waiting for an
  interrupt before exiting the mmu notifier handler.

Avi said:

  kvm may be a buyer.  kvm::mmu_lock, which serializes guest page
  faults, also protects long operations such as destroying large ranges.
  It would be good to convert it into a spinlock, but as it is used inside
  mmu notifiers, this cannot be done.

  (there are alternatives, such as keeping the spinlock and using a
  generation counter to do the teardown in O(1), which is what the "may"
  is doing up there).

[akpm@linux-foundation.orgpossible speed tweak in hugetlb_cow(), cleanups]
Signed-off-by: NAndrea Arcangeli <andrea@qumranet.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Liran Liss <liranl@mellanox.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The update_mmu_cache() takes a pointer (to pte_t by default) as the last
argument but the huge_memory.c passes a pmd_t value.  The patch changes
the argument to the pmd_t * pointer.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSteve Capper <steve.capper@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If NUMA is enabled, the indicator is not reset if the previous page
request failed, ausing us to trigger the BUG_ON() in
khugepaged_alloc_page().
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In file and anon rmap, we use interval trees to find potentially relevant
vmas and then call vma_address() to find the virtual address the given
page might be found at in these vmas.  vma_address() used to include a
check that the returned address falls within the limits of the vma, but
this check isn't necessary now that we always use interval trees in rmap:
the interval tree just doesn't return any vmas which this check would find
to be irrelevant.  As a result, we can replace the use of -EFAULT error
code (which then needed to be checked in every call site) with a
VM_BUG_ON().
Signed-off-by: NMichel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list.  This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.

By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.

While the change is large, all of its pieces are fairly simple.

Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead.  The exception here is ksm, where the
page's index is not known.  It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.

When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree.  This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
 The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a check to hugepage_madvise(), to refuse MADV_HUGEPAGE if
VM_NOHUGEPAGE is set in mm->def_flags.  On s390, the VM_NOHUGEPAGE flag
will be set in mm->def_flags for kvm processes, to prevent any future thp
mappings.  In order to also prevent MADV_HUGEPAGE on such an mm,
hugepage_madvise() should check mm->def_flags.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On s390, a valid page table entry must not be changed while it is attached
to any CPU.  So instead of pmd_mknotpresent() and set_pmd_at(), an IDTE
operation would be necessary there.  This patch introduces the
pmdp_invalidate() function, to allow architecture-specific
implementations.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The thp page table pre-allocation code currently assumes that pgtable_t is
of type "struct page *".  This may not be true for all architectures, so
this patch removes that assumption by replacing the functions
prepare_pmd_huge_pte() and get_pmd_huge_pte() with two new functions that
can be defined architecture-specific.

It also removes two VM_BUG_ON checks for page_count() and page_mapcount()
operating on a pgtable_t.  Apart from the VM_BUG_ON removal, there will be
no functional change introduced by this patch.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since it is called in start_khugepaged
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use khugepaged_enabled to see whether thp is enabled
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge khugepaged_loop into khugepaged
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

They are used to abstract the difference between NUMA enabled and NUMA
disabled to make the code more readable
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If NUMA is enabled, we can release the page in the page pre-alloc
operation, then the CONFIG_NUMA dependent code can be reduced
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two pre-alloc operations in these two function, the different is:
- it allows to sleep if page alloc fail in khugepaged_loop
- it exits immediately if page alloc fail in khugepaged_do_scan

Actually, in khugepaged_do_scan, we can allow the pre-alloc to sleep on
the first failure, then the operation in khugepaged_loop can be removed
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If NUMA is disabled, hpage is used as page pre-alloc, so there are two
cases for hpage:

- it is !NULL, means the page is not consumed otherwise,
- the page has been consumed

If NUMA is enabled, hpage is just used as alloc-fail indicator which is
not a real page, NULL means not fail triggered.

So, we can release the page only if !IS_ERR_OR_NULL
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the check of kthread_should_stop() to the conditions which are used to
wakeup on khugepaged_wait, then kthread_stop is enough to let the thread
exit
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, khugepaged creation and cancel are completely serial under the
protection of khugepaged_mutex, it is impossible that many khugepaged
entities are running
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, hugepaged_mutex is used really complexly and hard to
understand, actually, it is just used to serialize start_khugepaged and
khugepaged for these reasons:

- khugepaged_thread is shared between them
- the thp disable path (echo never > transparent_hugepage/enabled) is
  nonblocking, so we need to protect khugepaged_thread to get a stable
  running state

These can be avoided by:

- use the lock to serialize the thread creation and cancel
- thp disable path can not finised until the thread exits

Then khugepaged_thread is fully controlled by start_khugepaged, khugepaged
will be happy without the lock
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The check is unnecessary since if mm_slot_cache or mm_slots_hash
initialize failed, no sysfs interface will be created
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

THP_COLLAPSE_ALLOC is double counted if NUMA is disabled since it has
already been calculated in khugepaged_alloc_hugepage
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge VM_INSERTPAGE into VM_MIXEDMAP.  VM_MIXEDMAP VMA can mix pure-pfn
ptes, special ptes and normal ptes.

Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like
VM_PFNMAP.  If driver populates whole VMA at mmap() it probably not
expects page-faults.

This patch removes special check from vma_wants_writenotify() which
disables pages write tracking for VMA populated via vm_instert_page().
BDI below mapped file should not use dirty-accounting, moreover
do_wp_page() can handle this.

vm_insert_page() still marks vma after first usage.  Usually it is called
from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to
change vma->vm_flags.  Caller must set VM_MIXEDMAP at mmap time if it
wants to call this function from other places, for example from page-fault
handler.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>