freq table is not per CPU but per policy, so it makes more sense to
keep it within struct cpufreq_policy instead of a per-cpu variable.

This patch does it. Over that, there is no need to set policy->freq_table
to NULL in ->exit(), as policy structure is going to be freed soon.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

 - Add missing newlines
 - Coalesce format fragments
 - Convert printks to pr_<level>
 - Align arguments
Based-on-patch-by: NSören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Multiple platforms need to set CPUs to a particular frequency before
suspending the system, so provide a common infrastructure for them.

Those platforms only need to point their ->suspend callback pointers
to the generic routine.
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}()
for handling suspend/resume of cpufreq governors.

Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found an issue where the
tunables configuration for clusters/sockets with non-boot CPUs was
lost after system suspend/resume, as we were notifying governors with
CPUFREQ_GOV_POLICY_EXIT on removal of the last CPU for that policy
which caused the tunables memory to be freed.

This is fixed by preventing any governor operations from being
carried out between the device suspend and device resume stages of
system suspend and resume, respectively.

We could have added these callbacks at dpm_{suspend|resume}_noirq()
level, but there is an additional problem that the majority of I/O
devices is already suspended at that point and if cpufreq drivers
want to change the frequency before suspending, then that not be
possible on some platforms (which depend on peripherals like i2c,
regulators, etc).
Reported-and-tested-by: NLan Tianyu <tianyu.lan@intel.com>
Reported-by: NJinhyuk Choi <jinchoi@broadcom.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We call __find_governor() during the addition of the first CPU of
each policy from __cpufreq_add_dev() to find the last governor used
for this CPU before it was hot-removed.

After that we call cpufreq_parse_governor() in cpufreq_init_policy(),
either with this governor, or with the default governor. Right after
that policy->governor is set to NULL.

While that code is not functionally problematic, the structure of it
is suboptimal, because some of the code required in cpufreq_init_policy()
is being executed by its caller, __cpufreq_add_dev(). So, it would make
more sense to get all of it together in a single place to make code more
readable.

Accordingly, move the code needed for policy initialization to
cpufreq_init_policy() and initialize policy->governor to NULL at the
beginning.

In order to clean up the code a bit more, some of the #ifdefs for
CONFIG_HOTPLUG_CPU are dropped too.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

policy->rwsem is used to lock access to all parts of code modifying
struct cpufreq_policy, but it's not used on a new policy created by
__cpufreq_add_dev().

Because of that, if cpufreq_update_policy() is called in a tight loop
on one CPU in parallel with offline/online of another CPU, then the
following crash can be triggered:

Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = c0003000
[00000020] *pgd=80000000004003, *pmd=00000000
Internal error: Oops: 206 [#1] PREEMPT SMP ARM

PC is at __cpufreq_governor+0x10/0x1ac
LR is at cpufreq_update_policy+0x114/0x150

---[ end trace f23a8defea6cd706 ]---
Kernel panic - not syncing: Fatal exception
CPU0: stopping
CPU: 0 PID: 7136 Comm: mpdecision Tainted: G      D W    3.10.0-gd727407-00074-g979ede8 #396

[<c0afe180>] (notifier_call_chain+0x40/0x68) from [<c02a23ac>] (__blocking_notifier_call_chain+0x40/0x58)
[<c02a23ac>] (__blocking_notifier_call_chain+0x40/0x58) from [<c02a23d8>] (blocking_notifier_call_chain+0x14/0x1c)
[<c02a23d8>] (blocking_notifier_call_chain+0x14/0x1c) from [<c0803c68>] (cpufreq_set_policy+0xd4/0x2b8)
[<c0803c68>] (cpufreq_set_policy+0xd4/0x2b8) from [<c0803e7c>] (cpufreq_init_policy+0x30/0x98)
[<c0803e7c>] (cpufreq_init_policy+0x30/0x98) from [<c0805a18>] (__cpufreq_add_dev.isra.17+0x4dc/0x7a4)
[<c0805a18>] (__cpufreq_add_dev.isra.17+0x4dc/0x7a4) from [<c0805d38>] (cpufreq_cpu_callback+0x58/0x84)
[<c0805d38>] (cpufreq_cpu_callback+0x58/0x84) from [<c0afe180>] (notifier_call_chain+0x40/0x68)
[<c0afe180>] (notifier_call_chain+0x40/0x68) from [<c02812dc>] (__cpu_notify+0x28/0x44)
[<c02812dc>] (__cpu_notify+0x28/0x44) from [<c0aeed90>] (_cpu_up+0xf4/0x1dc)
[<c0aeed90>] (_cpu_up+0xf4/0x1dc) from [<c0aeeed4>] (cpu_up+0x5c/0x78)
[<c0aeeed4>] (cpu_up+0x5c/0x78) from [<c0aec808>] (store_online+0x44/0x74)
[<c0aec808>] (store_online+0x44/0x74) from [<c03a40f4>] (sysfs_write_file+0x108/0x14c)
[<c03a40f4>] (sysfs_write_file+0x108/0x14c) from [<c03517d4>] (vfs_write+0xd0/0x180)
[<c03517d4>] (vfs_write+0xd0/0x180) from [<c0351ca8>] (SyS_write+0x38/0x68)
[<c0351ca8>] (SyS_write+0x38/0x68) from [<c0205de0>] (ret_fast_syscall+0x0/0x30)

Fix that by taking locks at appropriate places in __cpufreq_add_dev()
as well.
Reported-by: NSaravana Kannan <skannan@codeaurora.org>
Suggested-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Policy must be fully initialized before it is being made available
for use by others. Otherwise cpufreq_cpu_get() would be able to grab
a half initialized policy structure that might not have affected_cpus
(for example) populated. Then, anybody accessing those fields will get
a wrong value and that will lead to unpredictable results.

In order to fix this, do all the necessary initialization before we
make the policy structure available via cpufreq_cpu_get(). That will
guarantee that any code accessing fields of the policy will get
correct data from them.
Reported-by: NSaravana Kannan <skannan@codeaurora.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If a module calls cpufreq_get while cpufreq is initializing, it's
possible for it to be called after cpufreq_driver is set but before
cpufreq_cpu_data is written during subsys_interface_register.  This
happens because cpufreq_get doesn't take the cpufreq_driver_lock
around its use of cpufreq_cpu_data.

Fix this by using cpufreq_cpu_get(cpu) to look up the policy rather
than reading it out of cpufreq_cpu_data directly.  cpufreq_cpu_get()
takes the appropriate locks to prevent this race from happening.

Since it's possible for policy to be NULL if the caller passes in an
invalid CPU number or calls the function before cpufreq is initialized,
delete the BUG_ON(!policy) and simply return 0.  Don't try to return
-ENOENT because that's negative and the function returns an unsigned
integer.

References: https://bbs.archlinux.org/viewtopic.php?id=177934Signed-off-by: NAaron Plattner <aplattner@nvidia.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq_update_policy() calls cpufreq_driver->get() to get current
frequency of a CPU and it is not supposed to fail or return zero.
Return error in case that happens.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Mark function as static in cpufreq.c because it is not
used outside this file.

This eliminates the following warning in cpufreq.c:
drivers/cpufreq/cpufreq.c:355:9: warning: no previous prototype for ‘show_boost’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq_update_policy() is called from two places currently. From a
workqueue handled queued from cpufreq_bp_resume() for boot CPU and
from cpufreq_cpu_callback() whenever a CPU is added.

The first one makes sure that boot CPU is running on the frequency
present in policy->cpu. But we don't really need a call from
cpufreq_cpu_callback(), because we always call cpufreq_driver->init()
(which will set policy->cur correctly) whenever first CPU of any
policy is added back. And so every policy structure is guaranteed to
have the right frequency in policy->cur.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Reduce the rampant usage of goto and the indentation level in
cpufreq_set_policy() to improve the readability of that code.

No functional changes should result from that.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>

Commit 42f921a6 (cpufreq: remove sysfs files for CPUs which failed to
come back after resume) tried to do this but missed this piece of code
to fix.

Currently we are getting this on suspend/resume:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 877 at fs/sysfs/dir.c:52 sysfs_warn_dup+0x68/0x84()
sysfs: cannot create duplicate filename '/devices/system/cpu/cpu1/cpufreq'
Modules linked in: brcmfmac brcmutil
CPU: 0 PID: 877 Comm: test-rtc-resume Not tainted 3.14.0-rc2-00259-g9398a10c #12
[<c0015bac>] (unwind_backtrace) from [<c0011850>] (show_stack+0x10/0x14)
[<c0011850>] (show_stack) from [<c056e018>] (dump_stack+0x80/0xcc)
[<c056e018>] (dump_stack) from [<c0025e44>] (warn_slowpath_common+0x64/0x88)
[<c0025e44>] (warn_slowpath_common) from [<c0025efc>] (warn_slowpath_fmt+0x30/0x40)
[<c0025efc>] (warn_slowpath_fmt) from [<c012776c>] (sysfs_warn_dup+0x68/0x84)
[<c012776c>] (sysfs_warn_dup) from [<c0127a54>] (sysfs_do_create_link_sd+0xb0/0xb8)
[<c0127a54>] (sysfs_do_create_link_sd) from [<c038ef64>] (__cpufreq_add_dev.isra.27+0x2a8/0x814)
[<c038ef64>] (__cpufreq_add_dev.isra.27) from [<c038f548>] (cpufreq_cpu_callback+0x70/0x8c)
[<c038f548>] (cpufreq_cpu_callback) from [<c0043864>] (notifier_call_chain+0x44/0x84)
[<c0043864>] (notifier_call_chain) from [<c0025f60>] (__cpu_notify+0x28/0x44)
[<c0025f60>] (__cpu_notify) from [<c00261e8>] (_cpu_up+0xf0/0x140)
[<c00261e8>] (_cpu_up) from [<c0569eb8>] (enable_nonboot_cpus+0x68/0xb0)
[<c0569eb8>] (enable_nonboot_cpus) from [<c006339c>] (suspend_devices_and_enter+0x198/0x2dc)
[<c006339c>] (suspend_devices_and_enter) from [<c0063654>] (pm_suspend+0x174/0x1e8)
[<c0063654>] (pm_suspend) from [<c00624e0>] (state_store+0x6c/0xbc)
[<c00624e0>] (state_store) from [<c01fc200>] (kobj_attr_store+0x14/0x20)
[<c01fc200>] (kobj_attr_store) from [<c0126e50>] (sysfs_kf_write+0x44/0x48)
[<c0126e50>] (sysfs_kf_write) from [<c012a274>] (kernfs_fop_write+0xb4/0x14c)
[<c012a274>] (kernfs_fop_write) from [<c00d4818>] (vfs_write+0xa8/0x180)
[<c00d4818>] (vfs_write) from [<c00d4bb8>] (SyS_write+0x3c/0x70)
[<c00d4bb8>] (SyS_write) from [<c000e620>] (ret_fast_syscall+0x0/0x30)
---[ end trace 76969904b614c18f ]---

Fix this by removing sysfs link for cpufreq directory when cpu removed
isn't policy->cpu.

Revamps: 42f921a6 (cpufreq: remove sysfs files for CPUs which failed to come back after resume)
Reported-and-tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This commit adds boost frequency support in cpufreq core (Hardware &
Software). Some SoCs (like Exynos4 - e.g. 4x12) allow setting frequency
above its normal operation limits. Such mode shall be only used for a
short time.

Overclocking (boost) support is essentially provided by platform
dependent cpufreq driver.

This commit unifies support for SW and HW (Intel) overclocking solutions
in the core cpufreq driver. Previously the "boost" sysfs attribute was
defined in the ACPI processor driver code. By default boost is disabled.
One global attribute is available at: /sys/devices/system/cpu/cpufreq/boost.

It only shows up when cpufreq driver supports overclocking.
Under the hood frequencies dedicated for boosting are marked with a
special flag (CPUFREQ_BOOST_FREQ) at driver's frequency table.
It is the user's concern to enable/disable overclocking with a proper call
to sysfs.

The cpufreq_boost_trigger_state() function is defined non static on purpose.
It is used later with thermal subsystem to provide automatic enable/disable
of the BOOST feature.
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(),
to get CPUs clk rate, have similar sort of code used in most of them.

This patch adds a generic ->get() which will do the same thing for them.
All those drivers are required to now is to set .get to cpufreq_generic_get()
and set their clk pointer in policy->clk during ->init().
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There are several problems with cpufreq stats in the way it handles
cpufreq_unregister_driver() and suspend/resume..

 - We must not lose data collected so far when suspend/resume happens
   and so stats directories must not be removed/allocated during these
   operations, which is done currently.

 - cpufreq_stat has registered notifiers with both cpufreq and hotplug.
   It adds sysfs stats directory with a cpufreq notifier: CPUFREQ_NOTIFY
   and removes this directory with a notifier from hotplug core.

   In case cpufreq_unregister_driver() is called (on rmmod cpufreq driver),
   stats directories per cpu aren't removed as CPUs are still online. The
   only call cpufreq_stats gets is cpufreq_stats_update_policy_cpu() for
   all CPUs except the last of each policy. And pointer to stat information
   is stored in the entry for last CPU in the per-cpu cpufreq_stats_table.
   But policy structure would be freed inside cpufreq core and so that will
   result in memory leak inside cpufreq stats (as we are never freeing
   memory for stats).

   Now if we again insert the module cpufreq_register_driver() will be
   called and we will again allocate stats data and put it on for first
   CPU of every policy.  In case we only have a single CPU per policy, we
   will return with a error from cpufreq_stats_create_table() due to this
   code:

	if (per_cpu(cpufreq_stats_table, cpu))
		return -EBUSY;

   And so probably cpufreq stats directory would not show up anymore (as
   it was added inside last policies->kobj which doesn't exist anymore).
   I haven't tested it, though. Also the values in stats files wouldn't
   be refreshed as we are using the earlier stats structure.

 - CPUFREQ_NOTIFY is called from cpufreq_set_policy() which is called for
   scenarios where we don't really want cpufreq_stat_notifier_policy() to get
   called. For example whenever we are changing anything related to a policy:
   min/max/current freq, etc. cpufreq_set_policy() is called and so cpufreq
   stats is notified. Where we don't do any useful stuff other than simply
   returning with -EBUSY from cpufreq_stats_create_table(). And so this
   isn't the right notifier that cpufreq stats..

 Due to all above reasons this patch does following changes:
 - Add new notifiers CPUFREQ_CREATE_POLICY and CPUFREQ_REMOVE_POLICY,
   which are only called when policy is created/destroyed. They aren't
   called for suspend/resume paths..
 - Use these notifiers in cpufreq_stat_notifier_policy() to create/destory
   stats sysfs entries. And so cpufreq_unregister_driver() or suspend/resume
   shouldn't be a problem for cpufreq_stats.
 - Return early from cpufreq_stat_cpu_callback() for suspend/resume sequence,
   so that we don't free stats structure.
Acked-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Sometimes boot loaders set CPU frequency to a value outside of frequency table
present with cpufreq core. In such cases CPU might be unstable if it has to run
on that frequency for long duration of time and so its better to set it to a
frequency which is specified in freq-table. This also makes cpufreq stats
inconsistent as cpufreq-stats would fail to register because current frequency
of CPU isn't found in freq-table.

Because we don't want this change to affect boot process badly, we go for the
next freq which is >= policy->cur ('cur' must be set by now, otherwise we will
end up setting freq to lowest of the table as 'cur' is initialized to zero).

In case current frequency doesn't match any frequency from freq-table, we throw
warnings to user, so that user can get this fixed in their bootloaders or
freq-tables.
Reported-by: NCarlos Hernandez <ceh@ti.com>
Reported-and-tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In the current code, if we fail during a frequency transition, we
simply send the POSTCHANGE notification with the old frequency. This
isn't enough.

One of the core users of these notifications is the code responsible
for keeping loops_per_jiffy aligned with frequency changes. And mostly
it is written as:

	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
		update-loops-per-jiffy...
	}

So, suppose we are changing to a higher frequency and failed during
transition, then following will happen:
- CPUFREQ_PRECHANGE notification with freq-new > freq-old
- CPUFREQ_POSTCHANGE notification with freq-new == freq-old

The first one will update loops_per_jiffy and second one will do
nothing. Even if we send the 2nd notification by exchanging values of
freq-new and old, some users of these notifications might get
unstable.

This can be fixed by simply calling cpufreq_notify_post_transition()
with error code and this routine will take care of sending
notifications in the correct order.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Folded 3 patches into one, rebased unicore2 changes]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This introduces a new routine cpufreq_notify_post_transition() which
can be used to send POSTCHANGE notification for new freq with or
without both {PRE|POST}CHANGE notifications for last freq. This is
useful at multiple places, especially for sending transition failure
notifications.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When a CPU is hot removed we'll cancel all the delayed work items via
gov_cancel_work(). Sometimes the delayed work function determines that
it should adjust the delay for all other CPUs that the policy is
managing. If this scenario occurs, the canceling CPU will cancel its own
work but queue up the other CPUs works to run.

Commit 3617f2 (cpufreq: Fix timer/workqueue corruption due to double
queueing) has tried to fix this, but reading governor_enabled is not
protected by cpufreq_governor_lock. Even though od_dbs_timer() checks
governor_enabled before gov_queue_work(), this scenario may occur. For
example:

 CPU0                                        CPU1
 ----                                        ----
 cpu_down()
  ...                                        <work runs>
  __cpufreq_remove_dev()                     od_dbs_timer()
   __cpufreq_governor()                       policy->governor_enabled
    policy->governor_enabled = false;
    cpufreq_governor_dbs()
     case CPUFREQ_GOV_STOP:
      gov_cancel_work(dbs_data, policy);
       cpu0 work is canceled
        timer is canceled
        cpu1 work is canceled
        <waits for cpu1>
                                              gov_queue_work(*, *, true);
                                               cpu0 work queued
                                               cpu1 work queued
                                               cpu2 work queued
                                               ...
        cpu1 work is canceled
        cpu2 work is canceled
        ...

At the end of the GOV_STOP case cpu0 still has a work queued to
run although the code is expecting all of the works to be
canceled. __cpufreq_remove_dev() will then proceed to
re-initialize all the other CPUs works except for the CPU that is
going down. The CPUFREQ_GOV_START case in cpufreq_governor_dbs()
will trample over the queued work and debugobjects will spit out
a warning:

WARNING: at lib/debugobjects.c:260 debug_print_object+0x94/0xbc()
ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x14
Modules linked in:
CPU: 1 PID: 1205 Comm: sh Tainted: G        W    3.10.0 #200
[<c01144f0>] (unwind_backtrace+0x0/0xf8) from [<c0111d98>] (show_stack+0x10/0x14)
[<c0111d98>] (show_stack+0x10/0x14) from [<c01272cc>] (warn_slowpath_common+0x4c/0x68)
[<c01272cc>] (warn_slowpath_common+0x4c/0x68) from [<c012737c>] (warn_slowpath_fmt+0x30/0x40)
[<c012737c>] (warn_slowpath_fmt+0x30/0x40) from [<c034c640>] (debug_print_object+0x94/0xbc)
[<c034c640>] (debug_print_object+0x94/0xbc) from [<c034c7f8>] (__debug_object_init+0xc8/0x3c0)
[<c034c7f8>] (__debug_object_init+0xc8/0x3c0) from [<c01360e0>] (init_timer_key+0x20/0x104)
[<c01360e0>] (init_timer_key+0x20/0x104) from [<c04872ac>] (cpufreq_governor_dbs+0x1dc/0x68c)
[<c04872ac>] (cpufreq_governor_dbs+0x1dc/0x68c) from [<c04833a8>] (__cpufreq_governor+0x80/0x1b0)
[<c04833a8>] (__cpufreq_governor+0x80/0x1b0) from [<c0483704>] (__cpufreq_remove_dev.isra.12+0x22c/0x380)
[<c0483704>] (__cpufreq_remove_dev.isra.12+0x22c/0x380) from [<c0692f38>] (cpufreq_cpu_callback+0x48/0x5c)
[<c0692f38>] (cpufreq_cpu_callback+0x48/0x5c) from [<c014fb40>] (notifier_call_chain+0x44/0x84)
[<c014fb40>] (notifier_call_chain+0x44/0x84) from [<c012ae44>] (__cpu_notify+0x2c/0x48)
[<c012ae44>] (__cpu_notify+0x2c/0x48) from [<c068dd40>] (_cpu_down+0x80/0x258)
[<c068dd40>] (_cpu_down+0x80/0x258) from [<c068df40>] (cpu_down+0x28/0x3c)
[<c068df40>] (cpu_down+0x28/0x3c) from [<c068e4c0>] (store_online+0x30/0x74)
[<c068e4c0>] (store_online+0x30/0x74) from [<c03a7308>] (dev_attr_store+0x18/0x24)
[<c03a7308>] (dev_attr_store+0x18/0x24) from [<c0256fe0>] (sysfs_write_file+0x100/0x180)
[<c0256fe0>] (sysfs_write_file+0x100/0x180) from [<c01fec9c>] (vfs_write+0xbc/0x184)
[<c01fec9c>] (vfs_write+0xbc/0x184) from [<c01ff034>] (SyS_write+0x40/0x68)
[<c01ff034>] (SyS_write+0x40/0x68) from [<c010e200>] (ret_fast_syscall+0x0/0x48)

In gov_queue_work(), lock cpufreq_governor_lock before gov_queue_work,
and unlock it after __gov_queue_work(). In this way, governor_enabled
is guaranteed not changed in gov_queue_work().
Signed-off-by: NJane Li <jiel@marvell.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Prevent __cpufreq_add_dev() from overwriting the existing values of
user_policy.{min|max|policy|governor} with defaults during resume
from system suspend.

Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume")
Reported-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If cpufreq_policy_restore() returns NULL during system resume,
__cpufreq_add_dev() should just fall back to the full initialization
instead of returning an error, because that may actually make things
work.  Moreover, it should not leave stale fallback data behind after
it has failed to restore a previously existing policy.

This change is based on Viresh Kumar's work.

Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume")
Reported-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+

When configuring a default governor (via CONFIG_CPU_FREQ_DEFAULT_*) with the
intel_pstate driver, the desired default policy is not properly set. For
example, setting 'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' ends up with the
'powersave' policy being set.

Fix by configuring the correct default policy, if either 'powersave' or
'performance' are requested. Otherwise, fallback to what the driver originally
set via its 'init' routine.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There are cases where cpufreq_add_dev() may fail for some CPUs
during system resume. With the current code we will still have
sysfs cpufreq files for those CPUs and struct cpufreq_policy
would be already freed for them. Hence any operation on those
sysfs files would result in kernel warnings.

Example of problems resulting from resume errors (from Bjørn Mork):

WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212()
missing sysfs attribute operations for kobject: (null)
Modules linked in: [stripped as irrelevant]
CPU: 0 PID: 6055 Comm: grep Tainted: G      D      3.13.0-rc2 #153
Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011
 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006
 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000
 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310
Call Trace:
 [<ffffffff81380b0e>] dump_stack+0x55/0x76
 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96
 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212
 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82
 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212
 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212
 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac
 [<ffffffff81122562>] do_dentry_open+0x17c/0x257
 [<ffffffff8112267e>] finish_open+0x41/0x4f
 [<ffffffff81130225>] do_last+0x80c/0x9ba
 [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42
 [<ffffffff81130606>] path_openat+0x233/0x4a1
 [<ffffffff81130b7e>] do_filp_open+0x35/0x85
 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184
 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa
 [<ffffffff811233a7>] SyS_openat+0xf/0x11
 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b

To fix this, remove those sysfs files or put the associated kobject
in case of such errors. Also, to make it simple, remove the cpufreq
sysfs links from all the CPUs (except for the policy->cpu) during
suspend, as that operation won't result in a loss of sysfs file
permissions and we can create those links during resume just fine.

Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume")
Reported-and-tested-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 2167e239 (cpufreq: fix garbage kobjects on errors during
suspend/resume) breaks suspend/resume on Martin Ziegler's system
(hard lockup during resume), so revert it.

Fixes: 2167e239 (cpufreq: fix garbage kobjects on errors during suspend/resume)
References: https://bugzilla.kernel.org/show_bug.cgi?id=66751Reported-by: NMartin Ziegler <ziegler@uni-freiburg.de>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 5a87182a (cpufreq: suspend governors on system
suspend/hibernate) causes hibernation problems to happen on
Bjørn Mork's and Paul Bolle's systems, so revert it.

Fixes: 5a87182a (cpufreq: suspend governors on system suspend/hibernate)
Reported-by: NBjørn Mork <bjorn@mork.no>
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is effectively a revert of commit 5302c3fb ("cpufreq: Perform
light-weight init/teardown during suspend/resume"), which enabled
suspend/resume optimizations leaving the sysfs files in place.

Errors during suspend/resume are not handled properly, leaving
dead sysfs attributes in case of failures.  There are are number of
functions with special code for the "frozen" case, and all these
need to also have special error handling.

The problem is easy to demonstrate by making cpufreq_driver->init()
or cpufreq_driver->get() fail during resume.

The code is too complex for a simple fix, with split code paths
in multiple blocks within a number of functions.  It is therefore
best to revert the patch enabling this code until the error handling
is in place.

Examples of problems resulting from resume errors:

WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212()
missing sysfs attribute operations for kobject: (null)
Modules linked in: [stripped as irrelevant]
CPU: 0 PID: 6055 Comm: grep Tainted: G      D      3.13.0-rc2 #153
Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011
 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006
 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000
 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310
Call Trace:
 [<ffffffff81380b0e>] dump_stack+0x55/0x76
 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96
 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212
 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82
 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212
 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212
 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac
 [<ffffffff81122562>] do_dentry_open+0x17c/0x257
 [<ffffffff8112267e>] finish_open+0x41/0x4f
 [<ffffffff81130225>] do_last+0x80c/0x9ba
 [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42
 [<ffffffff81130606>] path_openat+0x233/0x4a1
 [<ffffffff81130b7e>] do_filp_open+0x35/0x85
 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184
 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa
 [<ffffffff811233a7>] SyS_openat+0xf/0x11
 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b

The failure to restore cpufreq devices on cancelled hibernation is
not a new bug. It is caused by the ACPI _PPC call failing unless the
hibernate is completed. This makes the acpi_cpufreq driver fail its
init.

Previously, the cpufreq device could be restored by offlining the
cpu temporarily.  And as a complete hibernation cycle would do this,
it would be automatically restored most of the time.  But after
commit 5302c3fb the leftover sysfs attributes will block any
device add action.  Therefore offlining and onlining CPU 1 will no
longer restore the cpufreq object, and a complete suspend/resume
cycle will replace it with garbage.

Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume")
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}_noirq()
for handling suspend/resume of cpufreq governors.

Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found anr issue where
tunables configuration for clusters/sockets with non-boot CPUs was
getting lost after suspend/resume, as we were notifying governors
with CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that
policy and so deallocating memory for tunables. This is fixed by
this patch as we don't allow any operation on governors after
device suspend and before device resume now.
Reported-and-tested-by: NLan Tianyu <tianyu.lan@intel.com>
Reported-by: NJinhyuk Choi <jinchoi@broadcom.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog, minor cleanups]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Most of the drivers do following in their ->target_index() routines:

	struct cpufreq_freqs freqs;
	freqs.old = old freq...
	freqs.new = new freq...

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

	/* Change rate here */

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.

There are few special cases though, like exynos5440, which doesn't do everything
on the call to ->target_index() routine and call some kind of bottom halves for
doing this work, work/tasklet/etc..

They may continue doing notification from their own code as flag:
CPUFREQ_ASYNC_NOTIFICATION is already set for them.

All drivers are also modified in this patch to avoid breaking 'git bisect', as
double notification would happen otherwise.
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NRussell King <linux@arm.linux.org.uk>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We have per-CPU cpu_policy_rwsem for cpufreq core, but we never use
all of them. We always use rwsem of policy->cpu and so we can
actually make this rwsem per policy instead.

This patch does this change. With this change other tricky situations
are also avoided now, like which lock to take while we are changing
policy->cpu, etc.
Suggested-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, the prototype of cpufreq_drivers target routines is:

int target(struct cpufreq_policy *policy, unsigned int target_freq,
		unsigned int relation);

And most of the drivers call cpufreq_frequency_table_target() to get a valid
index of their frequency table which is closest to the target_freq. And they
don't use target_freq and relation after that.

So, it makes sense to just do this work in cpufreq core before calling
cpufreq_frequency_table_target() and simply pass index instead. But this can be
done only with drivers which expose their frequency table with cpufreq core. For
others we need to stick with the old prototype of target() until those drivers
are converted to expose frequency tables.

This patch implements the new light weight prototype for target_index() routine.
It looks like this:

int target_index(struct cpufreq_policy *policy, unsigned int index);

CPUFreq core will call cpufreq_frequency_table_target() before calling this
routine and pass index to it. Because CPUFreq core now requires to call routines
present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time.

This also marks target() interface as deprecated. So, that new drivers avoid
using it. And Documentation is updated accordingly.

It also converts existing .target() to newly defined light weight
.target_index() routine for many driver.
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NRussell King <linux@arm.linux.org.uk>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rjw@rjwysocki.net>

The function update_policy_cpu() is expected to be called when the policy->cpu
of a cpufreq policy is to be changed: ie., the new CPU nominated to become the
policy->cpu is different from the old one.

Print a warning if it is invoked with new_cpu == old_cpu, since such an
invocation might hint at a faulty logic in the caller.
Suggested-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

CONFIG_CPU_FREQ_TABLE will be always enabled when cpufreq framework is used, as
cpufreq core depends on it. So, we don't need this CONFIG option anymore as it
is not configurable. Remove CONFIG_CPU_FREQ_TABLE and update its users.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Many CPUFreq drivers for SMP system (where all cores share same clock lines), do
similar stuff in their ->init() part.

This patch creates a generic routine in cpufreq core which can be used by these
so that we can remove some redundant code.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Almost all drivers set policy->cur with current CPU frequency in their ->init()
part. This can be done for all of them at core level and so they wouldn't need
to do it.

This patch adds supporting code in cpufreq core for calling get() after we have
called init() for a policy.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use cpufreq_driver->flags to mark CPUFREQ_HAVE_GOVERNOR_PER_POLICY instead
of a separate field within cpufreq_driver. This will save some bytes of
memory.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Earlier there used to be two functions named __cpufreq_set_policy() and
cpufreq_set_policy(), but now we only have a single routine lets name it
cpufreq_set_policy() instead of __cpufreq_set_policy().

This also removes some invalid comments or fixes some incorrect comments.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Nobody except cpufreq_remove_dev() calls __cpufreq_remove_dev() and
so we don't need two separate routines here. Merge code from
__cpufreq_remove_dev() into cpufreq_remove_dev() and get rid of
__cpufreq_remove_dev().
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

As a rule its better not to break string (quoted inside "") in a
print statement even if it crosses 80 column boundary as that may
introduce bugs and so this patch rewrites one of the print statements..
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We don't need a blank line just at start of a block, lets remove it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>