For HFP offload use case, codec needs to be configured
before opening SCO connection. This patch sends
HCI_CONFIGURE_DATA_PATH command to configure doec before
opening SCO connection.
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

< HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d) plen 59
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Packet type: 0x0380
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
        Retransmission effort: Optimize for link quality (0x02)
> HCI Event: Command Status (0x0f) plen 4
      Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Success (0x00)
        Handle: 257
        Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x06
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
Signed-off-by: NKiran K <kiran.k@intel.com>
Reviewed-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch allows user space to set the codec that needs to
be used for HFP offload use case. The codec details are cached and
the controller is configured before opening the SCO connection.
Signed-off-by: NKiran K <kiran.k@intel.com>
Reviewed-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

For Intel controllers supporting HFP offload usecase,
define a callback function to fetch data_path_id
Signed-off-by: NKiran K <kiran.k@intel.com>
Reviewed-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add BT_CODEC option for getsockopt systemcall to get the details
of offload codecs supported over SCO socket
Signed-off-by: NKiran K <kiran.k@intel.com>
Reviewed-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Read offload use cases supported by controller.
Signed-off-by: NKiran K <kiran.k@intel.com>
Reviewed-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use V2 version of read local supported command is controller
supports

snoop:
> HCI Event: Command Complete (0x0e) plen 20
      Read Local Supported Codecs V2 (0x04|0x000d) ncmd 1
        Status: Success (0x00)
        Number of supported codecs: 7
          Codec: u-law log (0x00)
          Logical Transport Type: 0x02
            Codec supported over BR/EDR SCO and eSCO
          Codec: A-law log (0x01)
          Logical Transport Type: 0x02
            Codec supported over BR/EDR SCO and eSCO
          Codec: CVSD (0x02)
          Logical Transport Type: 0x02
            Codec supported over BR/EDR SCO and eSCO
          Codec: Transparent (0x03)
          Logical Transport Type: 0x02
            Codec supported over BR/EDR SCO and eSCO
          Codec: Linear PCM (0x04)
          Logical Transport Type: 0x02
            Codec supported over BR/EDR SCO and eSCO
          Codec: Reserved (0x08)
          Logical Transport Type: 0x03
            Codec supported over BR/EDR ACL
            Codec supported over BR/EDR SCO and eSCO
          Codec: mSBC (0x05)
          Logical Transport Type: 0x03
            Codec supported over BR/EDR ACL
            Codec supported over BR/EDR SCO and eSCO
        Number of vendor codecs: 0
......
< HCI Command: Read Local Suppor.. (0x04|0x000e) plen 7
        Codec: mSBC (0x05)
        Logical Transport Type: 0x00
        Direction: Input (Host to Controller) (0x00)
> HCI Event: Command Complete (0x0e) plen 12
      Read Local Supported Codec Capabilities (0x04|0x000e) ncmd 1
        Status: Success (0x00)
        Number of codec capabilities: 1
         Capabilities #0:
        00 00 11 15 02 33
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Move reading of supported local codecs into a separate init function,
query codecs capabilities and cache the data
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Before freeing struct sco_conn, all delayed timeout work should be
cancelled. Otherwise, sco_sock_timeout could potentially use the
sco_conn after it has been freed.

Additionally, sco_conn.timeout_work should be initialized when the
connection is allocated, not when the channel is added. This is
because an sco_conn can create channels with multiple sockets over its
lifetime, which happens if sockets are released but the connection
isn't deleted.

Fixes: ba316be1 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: NDesmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

In sco_conn_del, conn->sk is read while holding on to the
sco_conn.lock to avoid races with a socket that could be released
concurrently.

However, in between unlocking sco_conn.lock and calling sock_hold,
it's possible for the socket to be freed, which would cause a
use-after-free write when sock_hold is finally called.

To fix this, the reference count of the socket should be increased
while the sco_conn.lock is still held.
Signed-off-by: NDesmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add support for another IMC Networks Mediatek Chip(MT7921)

* /sys/kernel/debug/usb/devices
T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3564 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
Signed-off-by: Nmark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add the new support ID(0x04c5, 0x165c) to usb_device_id table for
Realtek RTL8852A.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04c5 ProdID=165c Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signed-off-by: NMax Chou <max.chou@realtek.com>
Reviewed-by: NChristian Bauer <christian.bauer1.external@fujitsu.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The information in /sys/kernel/debug/usb/devices about the MT7922U
Bluetooth device is listed as the below.

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=7922 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Nmark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The MediaTek chip support vendor specific HCI command(0xfc1a) to
change the public address. Add hdev->set_bdaddr handler for MediaTek
Chip. After doing a power cycle or MediaTek Bluetooth reset, BD_ADDR
will bring back the original one.
Signed-off-by: Nmark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

use-after-free error in lock_sock_nested is reported:

[  179.140137][ T3731] =====================================================
[  179.142675][ T3731] BUG: KMSAN: use-after-free in lock_sock_nested+0x280/0x2c0
[  179.145494][ T3731] CPU: 4 PID: 3731 Comm: kworker/4:2 Not tainted 5.12.0-rc6+ #54
[  179.148432][ T3731] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[  179.151806][ T3731] Workqueue: events l2cap_chan_timeout
[  179.152730][ T3731] Call Trace:
[  179.153301][ T3731]  dump_stack+0x24c/0x2e0
[  179.154063][ T3731]  kmsan_report+0xfb/0x1e0
[  179.154855][ T3731]  __msan_warning+0x5c/0xa0
[  179.155579][ T3731]  lock_sock_nested+0x280/0x2c0
[  179.156436][ T3731]  ? kmsan_get_metadata+0x116/0x180
[  179.157257][ T3731]  l2cap_sock_teardown_cb+0xb8/0x890
[  179.158154][ T3731]  ? __msan_metadata_ptr_for_load_8+0x10/0x20
[  179.159141][ T3731]  ? kmsan_get_metadata+0x116/0x180
[  179.159994][ T3731]  ? kmsan_get_shadow_origin_ptr+0x84/0xb0
[  179.160959][ T3731]  ? l2cap_sock_recv_cb+0x420/0x420
[  179.161834][ T3731]  l2cap_chan_del+0x3e1/0x1d50
[  179.162608][ T3731]  ? kmsan_get_metadata+0x116/0x180
[  179.163435][ T3731]  ? kmsan_get_shadow_origin_ptr+0x84/0xb0
[  179.164406][ T3731]  l2cap_chan_close+0xeea/0x1050
[  179.165189][ T3731]  ? kmsan_internal_unpoison_shadow+0x42/0x70
[  179.166180][ T3731]  l2cap_chan_timeout+0x1da/0x590
[  179.167066][ T3731]  ? __msan_metadata_ptr_for_load_8+0x10/0x20
[  179.168023][ T3731]  ? l2cap_chan_create+0x560/0x560
[  179.168818][ T3731]  process_one_work+0x121d/0x1ff0
[  179.169598][ T3731]  worker_thread+0x121b/0x2370
[  179.170346][ T3731]  kthread+0x4ef/0x610
[  179.171010][ T3731]  ? process_one_work+0x1ff0/0x1ff0
[  179.171828][ T3731]  ? kthread_blkcg+0x110/0x110
[  179.172587][ T3731]  ret_from_fork+0x1f/0x30
[  179.173348][ T3731]
[  179.173752][ T3731] Uninit was created at:
[  179.174409][ T3731]  kmsan_internal_poison_shadow+0x5c/0xf0
[  179.175373][ T3731]  kmsan_slab_free+0x76/0xc0
[  179.176060][ T3731]  kfree+0x3a5/0x1180
[  179.176664][ T3731]  __sk_destruct+0x8af/0xb80
[  179.177375][ T3731]  __sk_free+0x812/0x8c0
[  179.178032][ T3731]  sk_free+0x97/0x130
[  179.178686][ T3731]  l2cap_sock_release+0x3d5/0x4d0
[  179.179457][ T3731]  sock_close+0x150/0x450
[  179.180117][ T3731]  __fput+0x6bd/0xf00
[  179.180787][ T3731]  ____fput+0x37/0x40
[  179.181481][ T3731]  task_work_run+0x140/0x280
[  179.182219][ T3731]  do_exit+0xe51/0x3e60
[  179.182930][ T3731]  do_group_exit+0x20e/0x450
[  179.183656][ T3731]  get_signal+0x2dfb/0x38f0
[  179.184344][ T3731]  arch_do_signal_or_restart+0xaa/0xe10
[  179.185266][ T3731]  exit_to_user_mode_prepare+0x2d2/0x560
[  179.186136][ T3731]  syscall_exit_to_user_mode+0x35/0x60
[  179.186984][ T3731]  do_syscall_64+0xc5/0x140
[  179.187681][ T3731]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  179.188604][ T3731] =====================================================

In our case, there are two Thread A and B:

Context: Thread A:              Context: Thread B:

l2cap_chan_timeout()            __se_sys_shutdown()
  l2cap_chan_close()              l2cap_sock_shutdown()
    l2cap_chan_del()                l2cap_chan_close()
      l2cap_sock_teardown_cb()        l2cap_sock_teardown_cb()

Once l2cap_sock_teardown_cb() excuted, this sock will be marked as SOCK_ZAPPED,
and can be treated as killable in l2cap_sock_kill() if sock_orphan() has
excuted, at this time we close sock through sock_close() which end to call
l2cap_sock_kill() like Thread C:

Context: Thread C:

sock_close()
  l2cap_sock_release()
    sock_orphan()
    l2cap_sock_kill()  #free sock if refcnt is 1

If C completed, Once A or B reaches l2cap_sock_teardown_cb() again,
use-after-free happened.

We should set chan->data to NULL if sock is destructed, for telling teardown
operation is not allowed in l2cap_sock_teardown_cb(), and also we should
avoid killing an already killed socket in l2cap_sock_close_cb().
Signed-off-by: NWang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Boot address was not getting updated when controller is present
in boot mode which is required to move the controller from boot mode
to operation mode after firmware download. This patch reads boot address
even if controller is present in boot mode.
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Cache Boot address present in firmware file which
is later used in Intel_Soft_Reset command to bring
controller from boot mode to operational mode.
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When connecting to a device using an RPA if the address has been
resolved by the controller (types 0x02 and 0x03) the identity address
shall be used as the actual RPA in the advertisement won't be visible
to the host.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Address types ADDR_LE_DEV_PUBLIC_RESOLVED and
ADDR_LE_DEV_RANDOM_RESOLVED shall be converted to ADDR_LE_PUBLIC and
ADDR_LE_RANDOM repectively since they are not safe to be used beyond
the scope of the events themselves.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When disconnecting the advertising shall be re-enabled only when the
connection role is slave/peripheral as the central role use advertising
to connect it could end up enabling the instance 0x00 if there are other
advertising instances.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The sco_send_frame() also takes lock_sock() during memcpy_from_msg()
call that may be endlessly blocked by a task with userfaultd
technique, and this will result in a hung task watchdog trigger.

Just like the similar fix for hci_sock_sendmsg() in commit
92c685dc5de0 ("Bluetooth: reorganize functions..."), this patch moves
the  memcpy_from_msg() out of lock_sock() for addressing the hang.

This should be the last piece for fixing CVE-2021-3640 after a few
already queued fixes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch sets up set_quality_report callback for Intel to
set and reset the debug features.
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch allows a user space process to enable/disable the quality
report events dynamically through the set experimental feature mgmt
interface.

Since the quality report feature needs to invoke the callback function
provided by the driver, i.e., hdev->set_quality_report, a valid
controller index is required.
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch refactors the set_exp_feature with a feature table
consisting of UUIDs and the corresponding callback functions.
In this way, a new experimental feature setting function can be
simply added with its UUID and callback function.
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch supports the link statistics telemetry events for
intel controllers
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

To avoid the overhead on both the controller and the host, the
Intel link statistics telemetry events are disabled by default.
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Legacy (v2.0) controllers do not support Extended OOB Data used by SSP.
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Since userfaultfd mechanism allows sleeping with kernel lock held,
avoiding page fault with kernel lock held where possible will make
the module more robust. This patch just brings memcpy_from_msg() calls
to out of sock lock.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add a if statements to avoid the warning.

Dan Carpenter report:
The patch faf482ca: "net: ipv4: Move ip_options_fragment() out of
loop" from Aug 23, 2021, leads to the following Smatch complaint:

    net/ipv4/ip_output.c:833 ip_do_fragment()
    warn: variable dereferenced before check 'iter.frag' (see line 828)
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: faf482ca ("net: ipv4: Move ip_options_fragment() out of loop")
Link: https://lore.kernel.org/netdev/20210830073802.GR7722@kadam/T/#tSigned-off-by: NYajun Deng <yajun.deng@linux.dev>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These checks are still not strict enough.  The main problem is that if
"cb->type == QRTR_TYPE_NEW_SERVER" is true then "len - hdrlen" is
guaranteed to be 4 but we need to be at least 16 bytes.  In fact, we
can reject everything smaller than sizeof(*pkt) which is 20 bytes.

Also I don't like the ALIGN(size, 4).  It's better to just insist that
data is needs to be aligned at the start.

Fixes: 0baa99ee ("net: qrtr: Allow non-immediate node routing")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot report an array-index-out-of-bounds in taprio_change
index 16 is out of range for type '__u16 [16]'
that's because mqprio->num_tc is lager than TC_MAX_QUEUE,so we check
the return value of netdev_set_num_tc.

Reported-by: syzbot+2b3e5fb6c7ef285a94f6@syzkaller.appspotmail.com
Signed-off-by: NHaimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when doi_def->type got value 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen in similar
cases.
Reported-by: NAbaci <abaci@linux.alibaba.com>
Signed-off-by: NMichael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: make exception handling less predictible

This second round of patches is addressing Keyu Man recommendations
to make linux hosts more robust against a class of brute force attacks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even after commit 6457378f ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()"), an attacker can still use brute force to learn
some secrets from a victim linux host.

One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.

Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.

After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.

This is slightly increasing memory size used by the hash table,
by 50% in average, we do not expect this to be a problem.

This patch is more complex than the prior one (IPv6 equivalent),
because IPv4 was reusing the oldest entry.
Since we need to be able to evict more than one entry per
update_or_create_fnhe() call, I had to replace
fnhe_oldest() with fnhe_remove_oldest().

Also note that we will queue extra kfree_rcu() calls under stress,
which hopefully wont be a too big issue.

Fixes: 4895c771 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NKeyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Tested-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even after commit 4785305c ("ipv6: use siphash in rt6_exception_hash()"),
an attacker can still use brute force to learn some secrets from a victim
linux host.

One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.

Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.

After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.

This is slightly increasing memory size used by the hash table,
we do not expect this to be a problem.

Following patch is dealing with the same issue in IPv4.

Fixes: 35732d01 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NKeyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Clean up and consolidate ct ecache infrastructure by merging ct and
   expect notifiers, from Florian Westphal.

2) Missing counters and timestamp in nfnetlink_queue and _log conntrack
   information.

3) Missing error check for xt_register_template() in iptables mangle,
   as a incremental fix for the previous pull request, also from
   Florian Westphal.

4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from
   Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl
   to make sure existing netfilter rulesets do not break. There is
   a static key to disable the hooks by default.

   The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable
   impact in the seg6_input path for non-netfilter users: similar
   numbers with and without this patch.

   This is a sample of the perf report output:

    11.67%  kpktgend_0       [ipv6]                    [k] ipv6_get_saddr_eval
     7.89%  kpktgend_0       [ipv6]                    [k] __ipv6_addr_label
     7.52%  kpktgend_0       [ipv6]                    [k] __ipv6_dev_get_saddr
     6.63%  kpktgend_0       [kernel.vmlinux]          [k] asm_exc_nmi
     4.74%  kpktgend_0       [ipv6]                    [k] fib6_node_lookup_1
     3.48%  kpktgend_0       [kernel.vmlinux]          [k] pskb_expand_head
     3.33%  kpktgend_0       [ipv6]                    [k] ip6_rcv_core.isra.29
     3.33%  kpktgend_0       [ipv6]                    [k] seg6_do_srh_encap
     2.53%  kpktgend_0       [ipv6]                    [k] ipv6_dev_get_saddr
     2.45%  kpktgend_0       [ipv6]                    [k] fib6_table_lookup
     2.24%  kpktgend_0       [kernel.vmlinux]          [k] ___cache_free
     2.16%  kpktgend_0       [ipv6]                    [k] ip6_pol_route
     2.11%  kpktgend_0       [kernel.vmlinux]          [k] __ipv6_addr_type
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Linus Walleij says:

====================
IXP46x PTP Timer clean-up and DT

ChangeLog v2->v3:

- Dropped the patch enabling compile tests: we are still dependent
  on some machine-specific headers. The plan is to get rid of this
  after device tree conversion. We include one of the compile testing
  fixes anyway, because it is nice to have fixed.

- Rebased on the latest net-next
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree probing support for the PTP module
adjacent to the ethernet module. It is pretty straight
forward, all resources are in the device tree as they
come to the platform device.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree bindings for the IXP46x PTP Timer, a companion
to the IXP4xx ethernet in newer platforms.

Cc: devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver is being passed interrupts, then looking up the
same interrupts as GPIOs a second time to convert them into
interrupts and set properties on them.

This is pointless: the GPIO and irqchip APIs of a GPIO chip
are orthogonal. Just request the interrupts and be done
with it, drop reliance on any GPIO functions or definitions.

Use devres-managed functions and add a small devress quirk
to unregister the clock as well and we can rely on devres
to handle all the resources and cut down a bunch of
boilerplate in the process.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>