Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Adds a stv0910_single modparm which, when set, configures the stv0910 to
run in single demodulator mode, currently intended for high bit rate
testing.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This adds all required glue code to support - in conjunction with the new
stv0910 and stv6111 demod/tuner drivers and additionally the lnbh25 LNB
controller driver - all current DVB-S/S2 hardware (bridges and flex
modules) from Digital Devices like the DD CineS2 V7 and V7A, current
S2 V4 DuoFlex modules, and probably all upcoming devices based on this
STV0910/STV6111/LNBH25 hardware stack.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The returned value is required for further evaluation of the exact
demodulator chip (stv090x or stv0910).
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This adds a frontend driver for the ST STV6111 DVB-S/S2 tuners. Like the
stv0910 demod frontend driver, this driver originates from the Digital
Devices' dddvb vendor driver package as of version 0.9.29, and was cleaned
up aswell. No functionality had to be removed though. Any camel case has
been converted to kernel_case, fixup patch has been proposed upstream.

Permission to reuse and mainline the driver code was formally granted by
Ralph Metzler <rjkm@metzlerbros.de>.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This was missing from the frontend_ops.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Original code at least has some signed/unsigned issues, resulting in
values like 32dBm. Implement signal strength readout to work without
asking the attached tuner, and use a lookup table instead of log calc.
Values reported appear plausible, gathered from feedback from several
testers.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implements stream_id filter and scrambling code setup in start() and also
sets FE_CAN_MULTISTREAM in frontend_ops. This enables the driver to
properly receive and handle multistream transponders, functionality has
been reported working fine by testers with access to such streams, in
conjunction with VDR on the userspace side.

The code snippet originates from the original vendor's dddvb driver
package and has been made working properly with the current in-kernel
DVB core API.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fixes smatch error:

  drivers/media/dvb-frontends/stv0910.c:715 dvbs2_nbch() error: buffer overflow 'nbch[fectype]' 2 <= 28

Also, fixes the nbch array table by adding the DUMMY_PLF element at the top
to match the enums (table element order was off by one before).

Patch sent upstream aswell.

Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This adds a multi frontend driver for the ST STV0910 DVB-S/S2 demodulator
frontends. The driver code originates from the Digital Devices' dddvb
vendor driver package as of version 0.9.29, and has been cleaned up from
core API usage which isn't supported yet in the kernel, and additionally
all obvious style issues have been resolved. All camel case and allcaps
have been converted to kernel_case and lowercase. Patches have been sent
to the vendor package maintainers to fix this aswell. Signal statistics
acquisition has been refactored to comply with standards.

Permission to reuse and mainline the driver code was formally granted by
Ralph Metzler <rjkm@metzlerbros.de>.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Now that the multiplexer framework is merged, drop the temporary
mmio-mux implementation from the video-mux driver and convert it to use
the multiplexer API.

[mchehab@s-opensource.com: fix a merge conflict at Kconfig]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

gcc-7 notices that we copy a fixed length string into another
string of the same size, with additional characters:

drivers/media/usb/usbvision/usbvision-i2c.c: In function 'usbvision_i2c_register':
drivers/media/usb/usbvision/usbvision-i2c.c:190:36: error: '%d' directive writing between 1 and 11 bytes into a region of size between 0 and 47 [-Werror=format-overflow=]
  sprintf(usbvision->i2c_adap.name, "%s-%d-%s", i2c_adap_template.name,
                                    ^~~~~~~~~~
drivers/media/usb/usbvision/usbvision-i2c.c:190:2: note: 'sprintf' output between 4 and 76 bytes into a destination of size 48

Using snprintf() makes the code more robust in general, but will still
trigger a possible warning about truncation in the string.
We know this won't happen as the template name is always "usbvision", so
we can easily avoid the warning as well by using this as the format string
directly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add helper functions for mbus to/from mplane pixel format conversion.
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fixes a crash on Renesas R8A7793 Gose board that uses these "compatible"
entries.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch enables support for non-Bluecherry labeled solo6110
based PCI cards which have 3 x TW2864B chips and one TW2865.
These cards are displayed by lspci -nn as

"Softlogic Co., Ltd. SOLO6110 H.264 Video encoder/decoder [9413:6110]"

Bluecherry cards have 4 x TW2864A. According to datasheet register 0xFF
of TW2864B chips contains value 0x6A or 0x6B depending on revision
which being shifted 3 bits right gives value 0x0d.
Existing version of solo6x10 fails on these cards with

[276582.344942] solo6x10 0000:07:00.0: Probing Softlogic 6110
[276582.402151] solo6x10 0000:07:00.0: Could not initialize any techwell chips
[276582.402781] solo6x10: probe of 0000:07:00.0 failed with error -22
Signed-off-by: NAnton Sviridenko <anton@corp.bluecherry.net>
Acked-by: NAndrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add r8a7796 DRIF bindings.
Signed-off-by: NRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/i2c/adv748x/adv748x-csi2.c: In function 'adv748x_csi2_init_controls':
drivers/media/i2c/adv748x/adv748x-csi2.c:251:20: warning: variable 'ctrl' set but not used [-Wunused-but-set-variable]
  struct v4l2_ctrl *ctrl;
                    ^~~~
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The ADV7481 is an integrated video decoder and combined HDMI/MHL
receiver.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Provide support for the ADV7481 and ADV7482.

The driver is modelled with 4 subdevices to allow simultaneous streaming
from the AFE (Analog front end) and HDMI inputs though two CSI TX
entities.

The HDMI entity is linked to the TXA CSI bus, whilst the AFE is linked
to the TXB CSI bus.

The driver is based on a prototype by Koji Matsuoka in the Renesas BSP,
and an earlier rework by Niklas Söderlund.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Create device tree bindings documentation for the ADV748x.
The ADV748x supports both the ADV7481 and ADV7482 chips which
provide analogue decoding and HDMI receiving capabilities
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Below was the trival error flagged by checkpatch.pl:
ERROR: space prohibited after that open parenthesis '('
Signed-off-by: NShy More <smklearn@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Below was the trivial wanrning flagged by checkpatch.pl
WARNING: Block comments use * on subsequent lines
Signed-off-by: NShy More <smklearn@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch fixed code alignment to open paranthesis.
Semantic should not be affected by this patch.

It has been rebased on top of media_tree atomisp branch
Signed-off-by: NPhilipp Guendisch <philipp.guendisch@fau.de>
Signed-off-by: NChris Baller <chris.baller@gmx.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch fixed comment style. Semantic should not be affected.
There are also two warnings left about too long lines, which
reduce readability if changed.
Signed-off-by: NPhilipp Guendisch <philipp.guendisch@fau.de>
Signed-off-by: NChris Baller <chris.baller@gmx.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Conditionally calling kfree()/vfree() can be replaced by a call to
kvfree() which handles both kmalloced memory and vmalloced memory.
The resulting wrapper function has been replaced with direct calls
to kvfree().

This change was made with the help of the following Coccinelle
semantic patch:
//<smpl>
@@
expression a;
@@
- if(...) { vfree(a); }
- else { kfree(a); }
+ kvfree(a);
// </smpl>
Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

kstrdup kernel primitive can be used to replace kmalloc followed by
string copy. This was reported by coccinelle tool.
Signed-off-by: NHari Prasath <gehariprasath@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  10754	   1360	      4	  12118	   2f56
drivers/staging/media/atomisp/i2c/gc2235.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  10818	   1296	      4	  12118	   2f56
drivers/staging/media/atomisp/i2c/gc2235.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  15148	   2640	      8	  17796	   4584
drivers/staging/media/atomisp/i2c/mt9m114.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  15244	   2512	      8	  17764	   4564
drivers/staging/media/atomisp/i2c/mt9m114.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  20729	   3264	      0	  23993	   5db9
drivers/staging/media/atomisp/i2c/ov5693/ov5693.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  20793	   3200	      0	  23993	   5db9
drivers/staging/media/atomisp/i2c/ov5693/ov5693.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  14771	   1880	      0	  16651	   410b drivers/staging/media/atomisp/i2c/ov2722.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  14835	   1816	      0	  16651	   410b drivers/staging/media/atomisp/i2c/ov2722.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  10297	   1888	      0	  12185	   2f99 drivers/staging/media/atomisp/i2c/gc0310.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  10361	   1824	      0	  12185	   2f99 drivers/staging/media/atomisp/i2c/gc0310.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  23804	   8448	      0	  32252	   7dfc drivers/staging/media/atomisp/i2c/ov8858.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  23868	   8384	      0	  32252	   7dfc drivers/staging/media/atomisp/i2c/ov8858.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  12466	   3120	      8	  15594	   3cea drivers/staging/media/atomisp/i2c/ov2680.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  12530	   3056	      8	  15594	   3cea drivers/staging/media/atomisp/i2c/ov2680.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   5347	   1920	     24	   7291	   1c7b drivers/staging/media/atomisp/i2c/lm3554.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   5411	   1856	     24	   7291	   1c7b drivers/staging/media/atomisp/i2c/lm3554.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix checkpath errors
Signed-off-by: NIvan Menshykov <ivan.menshykov@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Several local use structs were missing declarations. Added static
qualifier to clean up Sparse warning.
Signed-off-by: NGuillermo O. Freschi <kedrot@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Return statement at the end of a void function is useless.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
identifier f;
expression e;
@@
void f(...) {
<...
- return
  e;
  ...>
  }
//</smpl>
Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Provides single source pad with up to 2592x1944 pixels at 10-bit raw
bayer format over MIPI CSI2 two lanes at 840Mbps/lane.
The driver supports following features:
- up to  30fps at 5M pixels
- manual exposure
- digital/analog gain
- V-blank/H-blank
- test pattern
- media controller
- runtime pm

[mchehab@s-opensource.com: fix a trivial merge conflict at Makefile]
Signed-off-by: NChiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NRamiro Oliveira <roliveir@synopsys.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Don't populate const arrays on the stack but instead make them static.
Makes the object code smaller and saves nearly 550 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   3638	    752	      0	   4390	   1126	smiapp-quirk.o

After:
   text	   data	    bss	    dec	    hex	filename
   2802	   1040	      0	   3842	    f02	smiapp-quirk.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>