- 30 11月, 2016 31 次提交
-
-
由 Christoph Hellwig 提交于
Pass the full bio to the decompression routines and use bio iterators to iterate over the data in the bio. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
This fixes the WARN_ON on BTRFS_I(inode)->reserved_extents in btrfs_destroy_inode and the WARN_ON on nonzero delalloc bytes on umount with qgroups enabled. I was able to reproduce this by setting up a small (~500kb) quota limit and writing a file one byte at a time until I hit the limit. The warnings would all hit on umount. The root cause is that we would reserve a block-sized range in both the reservation and the quota in btrfs_check_data_free_space, but if we encountered a problem (like e.g. EDQUOT), we would only release the single byte in the qgroup reservation. That caused an iotree state split, which increased the number of outstanding extents, in turn disallowing releasing the metadata reservation. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NQu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
At this point we will have dropped extent entries from the file, so if we fail to insert the new hole entries then we are leaving the fs in a corrupt state (albeit an easily fixed one). Abort the transaciton if this happens so we can avoid corrupting the fs. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
In order to do hole punching we have a block reserve to hold the reservation we need to drop the extents in our range. Since we could end up dropping a lot of extents we set rsv->failfast so we can just loop around again and drop the remaining of the range. Unfortunately we unconditionally fill the hole extents in and start from the last extent we encountered, which we may or may not have dropped. So this can result in overlapping file extent entries, which can be tripped over in a variety of ways, either by hitting BUG_ON(!ret) in fill_holes() after the search, or in btrfs_set_item_key_safe() in btrfs_drop_extent() at a later time by an unrelated task. Fix this by only setting drop_end to the last extent we did actually drop. This way our holes are filled in properly for the range that we did drop, and the rest of the range that remains to be dropped is actually dropped. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
If we process the last item in the leaf and hit an I/O error while reading the next leaf, we return -EIO without having adjusted the position. Since we have emitted dirents, getdents() will return the byte count to the user instead of the error. Subsequent callers will emit the last successful dirent again, and return -EIO again, with the same result. Callers loop forever. Instead, if we always increment ctx->pos after emitting or skipping the dirent, we'll be sure that we won't hit the same one again. When we go to process the next leaf, we won't have emitted any dirents and the -EIO will be returned to the user properly. We also don't need to track if we've emitted a dirent already or if we've changed the position yet. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
Commit 3de4586c (Btrfs: Allow subvolumes and snapshots anywhere in the directory tree) introduced the current system of placing snapshots in the directory tree. It also introduced the behavior of creating the snapshot and then creating the directory entries for it. We've kept this code around for compatibility reasons, but it turns out that no file systems with the old tree_root based snapshots can be mounted on newer (>= 2009) kernels anyway. About a month after the above commit, commit 2a7108ad (Btrfs: rev the disk format for the inode compat and csum selection changes) landed, changing the superblock magic number. As a result, we know that we'll never encounter tree_root-based dirents or have to deal with skipping our own snapshot dirents. Since that also means that we're now only iterating over DIR_INDEX items, which only contain one directory entry per leaf item, we don't need to loop over the leaf item contents anymore either. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nick Terrell 提交于
If zlib_inflateInit2 fails, the input page is never unmapped. Add a call to kunmap when it fails. Signed-off-by: NNick Terrell <nickrterrell@gmail.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The balance status item contains currently known filter values, but the stripes filter was unintentionally not among them. This would mean, that interrupted and automatically restarted balance does not apply the stripe filters. Fixes: dee32d0a CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Christophe JAILLET 提交于
'btrfs_iget()' can not return NULL, so this test can be removed. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Domagoj Tršan 提交于
csum member of struct btrfs_super_block has array type of u8. It makes sense that function btrfs_csum_final should be also declared to accept u8 *. I changed the declaration of method void btrfs_csum_final(u32 crc, char *result); to void btrfs_csum_final(u32 crc, u8 *result); Signed-off-by: NDomagoj Tršan <domagoj.trsan@gmail.com> [ changed cast to u8 at several call sites ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
If we have |0--hole--4095||4096--preallocate--12287| instead of using preallocated space, a 8K direct write will just create a new 8K extent and it'll end up with |0--new extent--8191||8192--preallocate--12287| It's because we find a hole em and then go to create a new 8K extent directly without adjusting @len. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NChris Mason <clm@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Shailendra Verma 提交于
There is no need to call kfree() if memdup_user() fails, as no memory was allocated and the error in the error-valued pointer should be returned. Signed-off-by: NShailendra Verma <shailendra.v@samsung.com> [ edit subject ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Using copy_extent_buffer is suitable for copying betwenn buffers from an arbitrary offset and deals with page boundaries. This is not necessary when doing a full extent_buffer-to-extent_buffer copy. We can utilize the copy_page helper as well. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The only memset we do is to 0, so sink the parameter to the function and simplify all calls. Rename the function to reflect the behaviour. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The copy_page is usually optimized and can be faster than memcpy. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The fsid and chunk tree uuid are always located in the first page, we don't need the to use write_extent_buffer. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
__bdev' has never been used since 0b86a832 (2008). Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
During the time, the function has been shrunk to the point that it just calls find_extent_buffer, just passing the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We dereference fs_info several times, besides that post-mount functions should never see a NULL fs_info. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The lock is held, we make the same lookup that previously failed with EEXIST and we don't insert NULL pointers. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Originally, the eb and start were passed separately in case eb is NULL. Since the readahead has been refactored in 4.6, this is not true anymore and we can get rid of the parameter. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
'start' is not used since "btrfs: reada: Pass reada_extent into __readahead_hook directly" (6e39dbe8). Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can't touch the eb directly in case the function is called with a non-zero error, so we can read the eb level when needed. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The helpers are not meant to be generic, the name is misleading. Convert them to static inlines for type checking. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Xiaoguang Wang 提交于
Fixes: ("btrfs: update btrfs_space_info's bytes_may_use timely") Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Adam Borowski 提交于
They're not even documented anywhere, letting users with no recourse but to RTFS. It's no big burden to output the bitfield as words. Also, display unknown flags as hex. Signed-off-by: NAdam Borowski <kilobyte@angband.pl> Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Omar Sandoval 提交于
My QEMU VM was seeing inexplicable I/O errors that I tracked down to errors coming from the qcow2 virtual drive in the host system. The qcow2 file is a nocow file on my Btrfs drive, which QEMU opens with O_DIRECT. Every once in awhile, pread() or pwrite() would return EEXIST, which makes no sense. This turned out to be a bug in btrfs_get_extent(). Commit 8dff9c85 ("Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent") fixed a case in btrfs_get_extent() where two threads race on adding the same extent map to an inode's extent map tree. However, if the added em is merged with an adjacent em in the extent tree, then we'll end up with an existing extent that is not identical to but instead encompasses the extent we tried to add. When we call merge_extent_mapping() to find the nonoverlapping part of the new em, the arithmetic overflows because there is no such thing. We then end up trying to add a bogus em to the em_tree, which results in a EEXIST that can bubble all the way up to userspace. Fix it by extending the identical extent map special case. Signed-off-by: NOmar Sandoval <osandov@fb.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Wang Xiaoguang 提交于
Tickets_id's name may result in some misunderstandings, it just indicates the next ticket will be handled and is not stored per ticket. Fixes: ce129655 ("btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress") Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 29 11月, 2016 2 次提交
-
-
由 Wang Xiaoguang 提交于
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Christoph Hellwig 提交于
btrfs_map_block supports different types of mappings, which to a large extent resemble block layer operations. But they don't always do, and currently btrfs dangerously overlays it's own flag over the block layer flags. This is just asking for a conflict, so introduce a different map flags enum inside of btrfs instead. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 28 11月, 2016 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/intel-iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from David Woodhouse: "Two minor fixes. The first fixes the assignment of SR-IOV virtual functions to the correct IOMMU unit, and the second fixes the excessively large (and physically contiguous) PASID tables used with SVM" * git://git.infradead.org/intel-iommu: iommu/vt-d: Fix PASID table allocation iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.9: - Fix unreadable output in __do_page_fault due to the KERN_CONT patchset - Correctly handle MIPS R6 fixes to the c0_wired register" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mm: Fix output of __do_page_fault MIPS: Mask out limit field when calculating wired entry count
-
- 27 11月, 2016 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs splice fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix default_file_splice_read()
-
由 Al Viro 提交于
Botched calculation of number of pages. As the result, we were dropping pieces when doing splice to pipe from e.g. 9p. Reported-by: NAlexei Starovoitov <ast@kernel.org> Tested-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Here is a revert and two bugfixes for the I2C designware driver. Please note that we are still hunting down a regression for the i2c-octeon driver. While there is a fix pending, we have unclear feedback from the testers currently. An rc8 would be quite helpful for this case" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: designware: do not disable adapter after transfer" i2c: designware: fix rx fifo depth tracking i2c: designware: report short transfers
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fix from Russell King: "This resolves the ksyms issues by reverting the commit which introduced the breakage" There was what I consider to be a better fix, but it's late in the rc game, so I'll take the revert. * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: Revert "arm: move exports to definitions"
-