- merge ata_prot_to_cmd() and ata_dev_set_protocol() as
       ata_rwcmd_protocol()
     - pave road for read/write multiple support
     - remove usage of pre-cached command and protocol values and call
       ata_rwcmd_protocol() instead
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>

==============
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

ATAPI needs to be padded to next 4 byte boundary, if misaligned.

Original work by me, many fixes from Tejun Heo.

This redoes the n_ports logic I proposed before as a bitmask.
ata_pci_init_native_mode is now used with a mask allowing for mixed mode
stuff later on. ata_pci_init_legacy_port is called with port number and
does one port now not two. Instead it is called twice by the ata init
logic which cleans both of them up.

There are stil limits in the original code left over

- IRQ/port mapping for legacy mode should be arch specific values
- You can have one legacy mode IDE adapter per PCI root bridge on some systems
- Doesn't handle mixed mode devices yet (but is now a lot closer to it)

Changes:
s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

ATAPI is getting close to being ready.  To increase exposure, we enable
the code in the upstream kernel, but default it to off (present
behavior).  Users must pass atapi_enabled=1 as a module option (if
module) or on the kernel command line (if built in) to turn on
discovery of their ATAPI devices.

- changes license of all code from OSL+GPL to plain ole GPL
  - except for NVIDIA, who hasn't yet responded about sata_nv
  - copyright holders were already contacted privately

- adds info in each driver about where hardware/protocol docs may be
  obtained

- where I have made major contributions, updated copyright dates

Needed for a few PATA drivers.

Also fix up a wrong comment.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Interrupts from devices sharing the same IRQ could cause
ata_host_intr to finish commands being processed by atapi_packet_task
if the commands are using ATA_PROT_ATAPI_NODATA or ATA_PROT_ATAPI_DMA
protocol.  This is because libata interrupt handler is unaware that
interrupts are not expected during that period.  This patch adds
ATA_FLAG_NOINTR flag to tell the interrupt handler that we're not
expecting interrupts.

 Note that once proper HSM is implemented for interrupt-driven PIO,
this should be merged into it and this flag will be removed.

 ahci.c is a different kind of beast, so it's left alone.

* The following drivers use ata_qc_issue_prot and ata_interrupt, so
  changes in libata core will do.

  ata_piix sata_sil sata_svw sata_via sata_sis sata_uli

* The following drivers use ata_qc_issue_prot and custom intr handler.
  They need this change to work correctly.

  sata_nv sata_vsc

* The following drivers use custom issue function and intr handler.
  Currently all custom issue functions don't support ATAPI, so this
  change is irrelevant, updated for consistency and to avoid later
  mistakes.

  sata_promise sata_qstor sata_sx4
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Also, fixup a tabs-to-spaces block of code in ata_piix.

Jens Axboe pointed out that the iounmap() call in libata was occurring
too early, and some drivers (ahci, probably others) were using ioremap'd
memory after it had been unmapped.

The patch should address that problem by way of improving the libata
driver API:

* move ->host_stop() call after all ->port_stop() calls have occurred.

* create default helper function ata_host_stop(), and move iounmap()
call there.

* add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark).
sata_qstor appears to require the host-stop-before-port-stop ordering
that existed prior to applying the attached patch.

Updated patch to fix erroneous flush of COMRESET set and missing flush
of COMRESET clear.  Created a new routine scr_write_flush() to try to
prevent this in the future.  Also, this patch is based on libata-2.6
instead of the previous libata-dev-2.6 based patch.
Signed-off-by: NBrett Russ <russb@emc.com>

Index: libata-2.6/drivers/scsi/libata-core.c
===================================================================

This patch works around an issue with WD drives (and possibly others)
over SiL PATA->SATA Bridges on SATA controllers locking up with
transfers > 200 sectors.
Signed-off-by: NBrad Campbell <brad@wasp.net.au>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!