The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
m4m-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
m4m-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/2c0aa5357c96c3caff8554f9ef3ab9c5a2b8d2f8.1585562459.git.amit.kucheria@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

With support for the MSM8996 UFS PHY added to the common QMP driver,
migrate the DTS to use the common QMP binding.
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200125001234.435384-1-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The CLKREF clocks in GCC are parented by RPM_SMD_LN_BB_CLK, through the
CXO2 pad. Wire this up so that this is properly enabled when need by the
various PHYs.
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200106080546.3192125-3-bjorn.andersson@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.

Since them family-specific binding is not listed in the .dtsi file, we
see the following warnings in 'make dtbs_check'. Fix them.

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/ebaa801adade53c567857db2f74af7d2e00f935b.1582871139.git.amit.kucheria@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This patch adds the gpio-ranges property to almost all of
the Qualcomm ARM platforms that utilize the pinctrl-msm
framework.

The gpio-ranges property is part of the gpiolib subsystem.
As a result, the binding text is available in section
"2.1 gpio- and pin-controller interaction" of
Documentation/devicetree/bindings/gpio/gpio.txt

For more information please see the patch titled:
"pinctrl: msm: fix gpio-hog related boot issues" from
this series.
Reported-by: NSven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NChristian Lamparter <chunkeey@gmail.com>
Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019]
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: NRobert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20200108125455.308969-2-robert.marko@sartura.hrSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

APQ8096 has its VDD APC (Power for quad Kryo applications
microprocessors) powered by PM8996 PMIC S9, S10, S11 tri-phase
regulators (gang). The bootloader may have configured these
regulators with non sustainable default values, leading to sporadic
hangs under CPU stress tests (cpufreq-bench). Ideally we should enable
voltage scaling along with frequency scaling, but for now just set the
regulator gang value to a sane voltage, capable of supporting highest
frequencies (turbo).
Signed-off-by: NLoic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1578401755-26211-1-git-send-email-loic.poulain@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Fix the following error/warn seen with make dtbs_check

arm,smmu-venus@d40000: $nodename:0: 'arm,smmu-venus@d40000' does not match '^iommu@[0-9a-f]*'
arm,smmu-venus@d40000: clock-names:0: 'bus' was expected
arm,smmu-venus@d40000: clock-names:1: 'iface' was expected

by rename nodename to "iommu".
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Link: https://lore.kernel.org/r/20200106102305.27059-1-stanimir.varbanov@linaro.org
[bjorn: Added padding of address to 8 digits]
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Register critical interrupts for each of the two tsens controllers
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/53d8f7b922ec889ed11380896c2a367ae0998db2.1575349416.git.amit.kucheria@linaro.orgSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Sort all the nodes by unit address, then name.
Acked-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Pad all addresses in msm8996.dtsi to 8 digits, in order to make it
easier to ensure ordering when adding new nodes.
Acked-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

As the definition of available PMICs and the names of their outputs are
board specifc move this to db820c.dtsi
Acked-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Supplies for the various components in the SoC depends on board layout,
so move the supply definitions to db820c.dtsi instead of carrying them
in the platform dtsi.
Acked-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Instead of mimicing the structure of the platform, reference nodes by
their label in apq8096-db820c.dtsi. Add labels in msm8996.dtsi where
necessary.
Acked-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

QUSB2 PHY on msm8996 doesn't work well when autosuspend by
dwc3 core using USB2PHYCFG register is enabled. One of the
issue seen is that PHY driver reports PLL lock failure and
fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
Fix this by using quirks to disable USB2 PHY LPM/suspend and
dwc3 core already takes care of explicitly suspending PHY
during suspend if quirks are specified.
Signed-off-by: NManu Gautam <mgautam@codeaurora.org>
Signed-off-by: NPaolo Pisati <p.pisati@gmail.com>
Link: https://lore.kernel.org/r/20191209151501.26993-1-p.pisati@gmail.comSigned-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Register upper-lower interrupts for each of the two tsens controllers.
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

This adds Qualcomm Venus video codec DT node for the video
codec hardware found in MSM8996 platforms.
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable coresight support by adding device nodes for the
available source, sinks and channel blocks on msm8996.

This also adds coresight cpu debug nodes.
Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NSai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Node names shouldn't include a vendor prefix and should whenever
possible use a generic identifier. Resolve this by renaming the smmu
nodes "iommu".
Reviewed-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable SMMUs on 8996 now that the WRZ workaround in the arm-smmu driver
has landed.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

The domain specifier was changed from using "reg" to "qcom,apr-domain",
update the dts accordingly.
Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

MDSS and its friends complain about the DTS is using legacy clock names,
update these to silence the warnings.
Reviewed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The current entry-latency-us is too short.
The proper way to convert between the device tree properties
from the vendor tree to the upstream PSCI device tree properties is:

entry-latency-us = qcom,time-overhead - qcom,latency-us

which gives

entry-latency-us = 210 - 80 = 130

Fixes: f6aee7af ("arm64: dts: qcom: msm8996: Add PSCI cpuidle low power states")
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 and
  only version 2 as published by the free software foundation this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NAlexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
the same microarchitecture and the two clusters only differ in the
maximum frequency attainable by the CPUs.

Add capacity-dmips-mhz property to allow the topology code to determine
the actual capacity by taking into account the highest frequency for
each CPU.
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Add device bindings for cpuidle states for cpu devices.

msm8996 features 4 cpus - 2 in each cluster. However, all cpus implement
the same microarchitecture and the two clusters only differ in the
maximum frequency attainable by the CPUs.
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Add the reset controller for the UFS controller, and wire it up
so that the UFS PHY can initialize itself without relying on
implicit sequencing between the two drivers.
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NEvan Green <evgreen@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

This patch adds support both digital and analog audio on DB820c.
This board has HDMI port and 3.5mm audio jack to support both digital
and analog audio respectively.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Add an initial node for the Adreno GPU.
Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Signed-off-by: NArchit Taneja <architt@codeaurora.org>
[Removed instances of mmagic clocks;
Use qcom,msm8996-smmu-v2 bindings]
Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Add device node for display smmu, aka. mdp_smmu.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Add device node for graphics smmu, aka. adreno_smmu.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Maintain naming consistency with what was landed for sdm845. Simplifies
parsing for test tools.
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

msm8996 has a total of 21 temperature sensors. Populate DT with
information about them.

There are 2 sensors on each of the cpus - one on the top, the other
below (we only expose one on the top in DT for now). For the GPU, we
expose both, the one on the top and the one below.

Depending on the version of the silicon, sensor 2 is either placed near
the L3 cache or the venus video decoder. It would've been nice to be
able to be version-specific but we don't have DTs that differentiate the
two versions of silicon yet.
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Initializing the SMMU trips a security violation, so disable the VFE
SMMU for now.

Fixes: f3442ab9 ("arm64: dts: qcom: msm8996: Add VFE SMMU node")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

Add rpmpd device node and its OPP table
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

Move from dwc3-of-simple to dwc3-qcom glue driver to
support peripheral mode which requires qscratch wrapper
programming on VBUS event.

Fixes: a4333c3a ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: NManu Gautam <mgautam@codeaurora.org>
Tested-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

Add a node for the Camera Subsystem present on the Qualcomm
MSM8996 SoC.
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

Add VFE SMMU node.
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Reviewed-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

RNG hardware in 8996 features (Execution Environment) EE for
HLOS to use, add the node for prng-ee for msm8996.
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>