Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 05 2月, 2021 7 次提交
  3. 16 1月, 2021 1 次提交
  5. 10 11月, 2020 1 次提交
  7. 30 10月, 2020 1 次提交
  9. 06 10月, 2020 1 次提交
  11. 03 10月, 2020 1 次提交
  13. 01 9月, 2020 2 次提交
  15. 27 8月, 2020 1 次提交
  17. 25 8月, 2020 1 次提交
  19. 02 5月, 2020 1 次提交
  21. 14 2月, 2020 1 次提交
  23. 04 2月, 2020 1 次提交
    • T
      gtp: use __GFP_NOWARN to avoid memalloc warning · bd5cd35b
      由 Taehee Yoo 提交于 
      gtp hashtable size is received by user-space.
So, this hashtable size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the gtp module.
So, this patch adds __GFP_NOWARN to avoid this message.

Splat looks like:
[ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740
[ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv]
[ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321
[ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740
[ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0
[ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246
[ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000
[ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
[ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000
[ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43
[ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240
[ 2171.292328][ T1860] FS:  00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[ 2171.293409][ T1860] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0
[ 2171.295424][ T1860] Call Trace:
[ 2171.295756][ T1860]  ? mark_held_locks+0xa5/0xe0
[ 2171.296659][ T1860]  ? __alloc_pages_slowpath+0x21b0/0x21b0
[ 2171.298283][ T1860]  ? gtp_encap_enable_socket+0x13e/0x400 [gtp]
[ 2171.298962][ T1860]  ? alloc_pages_current+0xc1/0x1a0
[ 2171.299475][ T1860]  kmalloc_order+0x22/0x80
[ 2171.299936][ T1860]  kmalloc_order_trace+0x1d/0x140
[ 2171.300437][ T1860]  __kmalloc+0x302/0x3a0
[ 2171.300896][ T1860]  gtp_newlink+0x293/0xba0 [gtp]
[ ... ]

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bd5cd35b
  25. 23 1月, 2020 1 次提交
    • E
      gtp: make sure only SOCK_DGRAM UDP sockets are accepted · 940ba149
      由 Eric Dumazet 提交于 
      A malicious user could use RAW sockets and fool
GTP using them as standard SOCK_DGRAM UDP sockets.

BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
 setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
 gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827
 gtp_encap_enable drivers/net/gtp.c:844 [inline]
 gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666
 __rtnl_newlink net/core/rtnetlink.c:3305 [inline]
 rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363
 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424
 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
 ___sys_sendmsg net/socket.c:2384 [inline]
 __sys_sendmsg+0x451/0x5f0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x441359
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144
 kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline]
 kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336
 __alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800
 alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207
 alloc_pages include/linux/gfp.h:534 [inline]
 alloc_slab_page+0x111/0x12f0 mm/slub.c:1511
 allocate_slab mm/slub.c:1656 [inline]
 new_slab+0x2bc/0x1130 mm/slub.c:1722
 new_slab_objects mm/slub.c:2473 [inline]
 ___slab_alloc+0x1533/0x1f30 mm/slub.c:2624
 __slab_alloc mm/slub.c:2664 [inline]
 slab_alloc_node mm/slub.c:2738 [inline]
 slab_alloc mm/slub.c:2783 [inline]
 kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788
 sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597
 sk_alloc+0xf0/0xbe0 net/core/sock.c:1657
 inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321
 __sock_create+0x8eb/0xf00 net/socket.c:1420
 sock_create net/socket.c:1471 [inline]
 __sys_socket+0x1a1/0x600 net/socket.c:1513
 __do_sys_socket net/socket.c:1522 [inline]
 __se_sys_socket+0x8d/0xb0 net/socket.c:1520
 __x64_sys_socket+0x4a/0x70 net/socket.c:1520
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Pablo Neira <pablo@netfilter.org>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      940ba149
  27. 09 1月, 2020 1 次提交
    • E
      gtp: fix bad unlock balance in gtp_encap_enable_socket · 90d72256
      由 Eric Dumazet 提交于 
      WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!

other info that might help us debug this:
2 locks held by syz-executor921/9688:
 #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
 #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951

stack backtrace:
CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline]
 print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984
 __lock_release kernel/locking/lockdep.c:4242 [inline]
 lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503
 sock_release_ownership include/net/sock.h:1496 [inline]
 release_sock+0x17c/0x1c0 net/core/sock.c:2961
 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
 gtp_encap_enable drivers/net/gtp.c:852 [inline]
 gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666
 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305
 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363
 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 ____sys_sendmsg+0x753/0x880 net/socket.c:2330
 ___sys_sendmsg+0x100/0x170 net/socket.c:2384
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg net/socket.c:2424 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x445d49
Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000
R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c
R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf

Fixes: e198987e ("gtp: fix suspicious RCU usage")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      90d72256
  29. 07 1月, 2020 1 次提交
  31. 25 12月, 2019 2 次提交
    • H
      gtp: do not confirm neighbor when do pmtu update · 6e9105c7
      由 Hangbin Liu 提交于 
      When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not
call dst_confirm_neigh(), we still set it to false to keep consistency with
IPv6 code.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6e9105c7
    • H
      net: add bool confirm_neigh parameter for dst_ops.update_pmtu · bd085ef6
      由 Hangbin Liu 提交于 
      The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.

But for tunnel code, it will call pmtu before xmit, like:
  - tnl_update_pmtu()
    - skb_dst_update_pmtu()
      - ip6_rt_update_pmtu()
        - __ip6_rt_update_pmtu()
          - dst_confirm_neigh()

If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.

So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.

On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.

To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Suggested-by: NDavid Miller <davem@davemloft.net>
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bd085ef6
  33. 15 12月, 2019 4 次提交
    • T
      gtp: avoid zero size hashtable · 6a902c0f
      由 Taehee Yoo 提交于 
      GTP default hashtable size is 1024 and userspace could set specific
hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0
from userspace,  hashtable will not work and panic will occur.

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
      6a902c0f
    • T
      gtp: fix an use-after-free in ipv4_pdp_find() · 94dc550a
      由 Taehee Yoo 提交于 
      ipv4_pdp_find() is called in TX packet path of GTP.
ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context.
In the current code, gtp->tid_hash and gtp->addr_hash are freed by
->dellink(), which is gtp_dellink().
But gtp_dellink() would be called while packets are processing.
So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash.
Instead, dev->priv_destructor() would be used because this callback
is called after all packet processing safely.

Test commands:
    ip link add veth1 type veth peer name veth2
    ip a a 172.0.0.1/24 dev veth1
    ip link set veth1 up
    ip a a 172.99.0.1/32 dev lo

    gtp-link add gtp1 &

    gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2
    ip r a  172.99.0.2/32 dev gtp1
    ip link set gtp1 mtu 1500

    ip netns add ns2
    ip link set veth2 netns ns2
    ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2
    ip netns exec ns2 ip link set veth2 up
    ip netns exec ns2 ip a a 172.99.0.2/32 dev lo
    ip netns exec ns2 ip link set lo up

    ip netns exec ns2 gtp-link add gtp2 &
    ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1
    ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2
    ip netns exec ns2 ip link set gtp2 mtu 1500

    hping3 172.99.0.2 -2 --flood &
    ip link del gtp1

Splat looks like:
[   72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195
[   72.569631][ T1195]
[   72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199
[   72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   72.571438][ T1195] Call Trace:
[   72.571764][ T1195]  dump_stack+0x96/0xdb
[   72.572171][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.572761][ T1195]  print_address_description.constprop.5+0x1be/0x360
[   72.573400][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.573971][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.574544][ T1195]  __kasan_report+0x12a/0x16f
[   72.575014][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.575593][ T1195]  kasan_report+0xe/0x20
[   72.576004][ T1195]  ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.576577][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[ ... ]
[   72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28
[   72.648512][ T1195] #PF: supervisor read access in kernel mode
[   72.649158][ T1195] #PF: error_code(0x0000) - not-present page
[   72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060
[   72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G    B             5.5.0-rc1 #199
[   72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp]
[ ... ]
[   72.679168][ T1195] Call Trace:
[   72.679603][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[   72.681915][ T1195]  ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp]
[   72.682513][ T1195]  ? lock_acquire+0x164/0x3b0
[   72.682966][ T1195]  ? gtp_dev_xmit+0x35e/0x890 [gtp]
[   72.683481][ T1195]  gtp_dev_xmit+0x3c2/0x890 [gtp]
[ ... ]

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
      94dc550a
    • T
      gtp: fix wrong condition in gtp_genl_dump_pdp() · 94a6d9fb
      由 Taehee Yoo 提交于 
      gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used
to dump pdp contexts. it would be re-executed because of dump packet size.

If dump packet size is too big, it saves current dump pointer
(gtp interface pointer, bucket, TID value) then it restarts dump from
last pointer.
Current GTP code allows adding zero TID pdp context but dump code
ignores zero TID value. So, last dump pointer will not be found.

In addition, this patch adds missing rcu_read_lock() in
gtp_genl_dump_pdp().

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
      94a6d9fb
    • T
      gtp: do not allow adding duplicate tid and ms_addr pdp context · 6b01b1d9
      由 Taehee Yoo 提交于 
      GTP RX packet path lookups pdp context with TID. If duplicate TID pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, TID value  should be unique.
GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, ms_addr value should be unique.

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
      6b01b1d9
  35. 08 7月, 2019 6 次提交
    • T
      gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable() · e30155fd
      由 Taehee Yoo 提交于 
      If an invalid role is sent from user space, gtp_encap_enable() will fail.
Then, it should call gtp_encap_disable_sock() but current code doesn't.
It makes memory leak.

Fixes: 91ed81f9 ("gtp: support SGSN-side tunnels")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e30155fd
    • T
      gtp: fix use-after-free in gtp_newlink() · a2bed907
      由 Taehee Yoo 提交于 
      Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().

Test commands:
   #SHELL 1
   while :
   do
	   for i in {1..5}
	   do
		./gtp-link add gtp$i &
	   done
	   killall gtp-link
   done

   #SHELL 2
   while :
   do
	modprobe -rv gtp
   done

Splat looks like:
[  753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[  753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[  753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G        W         5.2.0-rc6+ #50
[  753.185801] Call Trace:
[  753.186264]  dump_stack+0x7c/0xbb
[  753.186863]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.187583]  print_address_description+0xc7/0x240
[  753.188382]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189097]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189846]  __kasan_report+0x12a/0x16f
[  753.190542]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.191298]  kasan_report+0xe/0x20
[  753.191893]  gtp_newlink+0x9b4/0xa5c [gtp]
[  753.192580]  ? __netlink_ns_capable+0xc3/0xf0
[  753.193370]  __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[  753.241201] Allocated by task 7186:
[  753.241844]  save_stack+0x19/0x80
[  753.242399]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[  753.243192]  __kmalloc+0x13e/0x300
[  753.243764]  ops_init+0xd6/0x350
[  753.244314]  register_pernet_operations+0x249/0x6f0
[ ... ]
[  753.251770] Freed by task 7178:
[  753.252288]  save_stack+0x19/0x80
[  753.252833]  __kasan_slab_free+0x111/0x150
[  753.253962]  kfree+0xc7/0x280
[  753.254509]  ops_free_list.part.11+0x1c4/0x2d0
[  753.255241]  unregister_pernet_operations+0x262/0x390
[ ... ]
[  753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[  753.287241] ------------[ cut here ]------------
[  753.287794] kernel BUG at lib/list_debug.c:25!
[  753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G    B   W         5.2.0-rc6+ #50
[  753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[  753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[  753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[  753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[  753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[  753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[  753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[  753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[  753.299564] FS:  00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[  753.300533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[  753.302183] Call Trace:
[  753.302530]  gtp_newlink+0x5f6/0xa5c [gtp]
[  753.303037]  ? __netlink_ns_capable+0xc3/0xf0
[  753.303576]  __rtnl_newlink+0xb9f/0x11b0
[  753.304092]  ? rtnl_link_unregister+0x230/0x230

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a2bed907
    • T
      gtp: fix Illegal context switch in RCU read-side critical section. · 3f167e19
      由 Taehee Yoo 提交于 
      ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.

Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2

Splat looks like:
[  130.618881] =============================
[  130.626382] WARNING: suspicious RCU usage
[  130.626994] 5.2.0-rc6+ #50 Not tainted
[  130.627622] -----------------------------
[  130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[  130.629684]
[  130.629684] other info that might help us debug this:
[  130.629684]
[  130.631022]
[  130.631022] rcu_scheduler_active = 2, debug_locks = 1
[  130.632136] 4 locks held by gtp-tunnel/1025:
[  130.632925]  #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[  130.634159]  #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[  130.635487]  #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[  130.636936]  #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[  130.638348]
[  130.638348] stack backtrace:
[  130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[  130.641318] Call Trace:
[  130.641707]  dump_stack+0x7c/0xbb
[  130.642252]  ___might_sleep+0x2c0/0x3b0
[  130.642862]  kmem_cache_alloc_trace+0x1cd/0x2b0
[  130.643591]  gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[  130.644371]  genl_family_rcv_msg+0x63a/0x1030
[  130.645074]  ? mutex_lock_io_nested+0x1090/0x1090
[  130.645845]  ? genl_unregister_family+0x630/0x630
[  130.646592]  ? debug_show_all_locks+0x2d0/0x2d0
[  130.647293]  ? check_flags.part.40+0x440/0x440
[  130.648099]  genl_rcv_msg+0xa3/0x130
[ ... ]

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3f167e19
    • T
      gtp: remove duplicate code in gtp_dellink() · a635037a
      由 Taehee Yoo 提交于 
      gtp_encap_disable() in gtp_dellink() is unnecessary because it will be
called by unregister_netdevice().
unregister_netdevice() internally calls gtp_dev_uninit() by ->ndo_uninit().
And gtp_dev_uninit() calls gtp_encap_disable().
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a635037a
    • T
      gtp: fix use-after-free in gtp_encap_destroy() · 1788b856
      由 Taehee Yoo 提交于 
      gtp_encap_destroy() is called twice.
1. When interface is deleted.
2. When udp socket is destroyed.
either gtp->sk0 or gtp->sk1u could be freed by sock_put() in
gtp_encap_destroy(). so, when gtp_encap_destroy() is called again,
it would uses freed sk pointer.

patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to
null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected
by rtnl_lock. so, rtnl_lock() is added.

Test command:
   gtp-link add gtp1 &
   killall gtp-link
   ip link del gtp1

Splat looks like:
[   83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0
[   83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008
[   83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50
[   83.188469] Call Trace:
[ ... ]
[   83.200126]  lock_acquire+0x141/0x380
[   83.200575]  ? lock_sock_nested+0x3a/0xf0
[   83.201069]  _raw_spin_lock_bh+0x38/0x70
[   83.201551]  ? lock_sock_nested+0x3a/0xf0
[   83.202044]  lock_sock_nested+0x3a/0xf0
[   83.202520]  gtp_encap_destroy+0x18/0xe0 [gtp]
[   83.203065]  gtp_encap_disable.isra.14+0x13/0x50 [gtp]
[   83.203687]  gtp_dellink+0x56/0x170 [gtp]
[   83.204190]  rtnl_delete_link+0xb4/0x100
[ ... ]
[   83.236513] Allocated by task 976:
[   83.236925]  save_stack+0x19/0x80
[   83.237332]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[   83.237894]  kmem_cache_alloc+0xd8/0x280
[   83.238360]  sk_prot_alloc.isra.42+0x50/0x200
[   83.238874]  sk_alloc+0x32/0x940
[   83.239264]  inet_create+0x283/0xc20
[   83.239684]  __sock_create+0x2dd/0x540
[   83.240136]  __sys_socket+0xca/0x1a0
[   83.240550]  __x64_sys_socket+0x6f/0xb0
[   83.240998]  do_syscall_64+0x9c/0x450
[   83.241466]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   83.242061]
[   83.242249] Freed by task 0:
[   83.242616]  save_stack+0x19/0x80
[   83.243013]  __kasan_slab_free+0x111/0x150
[   83.243498]  kmem_cache_free+0x89/0x250
[   83.244444]  __sk_destruct+0x38f/0x5a0
[   83.245366]  rcu_core+0x7e9/0x1c20
[   83.245766]  __do_softirq+0x213/0x8fa

Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1788b856
    • T
      gtp: fix suspicious RCU usage · e198987e
      由 Taehee Yoo 提交于 
      gtp_encap_enable_socket() and gtp_encap_destroy() are not protected
by rcu_read_lock(). and it's not safe to write sk->sk_user_data.
This patch make these functions to use lock_sock() instead of
rcu_dereference_sk_user_data().

Test commands:
    gtp-link add gtp1

Splat looks like:
[   83.238315] =============================
[   83.239127] WARNING: suspicious RCU usage
[   83.239702] 5.2.0-rc6+ #49 Not tainted
[   83.240268] -----------------------------
[   83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage!
[   83.243828]
[   83.243828] other info that might help us debug this:
[   83.243828]
[   83.246325]
[   83.246325] rcu_scheduler_active = 2, debug_locks = 1
[   83.247314] 1 lock held by gtp-link/1008:
[   83.248523]  #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0
[   83.251503]
[   83.251503] stack backtrace:
[   83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49
[   83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   83.254562] Call Trace:
[   83.254995]  dump_stack+0x7c/0xbb
[   83.255567]  gtp_encap_enable_socket+0x2df/0x360 [gtp]
[   83.256415]  ? gtp_find_dev+0x1a0/0x1a0 [gtp]
[   83.257161]  ? memset+0x1f/0x40
[   83.257843]  gtp_newlink+0x90/0xa21 [gtp]
[   83.258497]  ? __netlink_ns_capable+0xc3/0xf0
[   83.259260]  __rtnl_newlink+0xb9f/0x11b0
[   83.260022]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e198987e
  37. 31 5月, 2019 1 次提交
  39. 28 4月, 2019 1 次提交
    • J
      genetlink: optionally validate strictly/dumps · ef6243ac
      由 Johannes Berg 提交于 
      Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.

Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:

    @@
    identifier ops;
    expression X;
    @@
    struct genl_ops ops[] = {
    ...,
     {
            .cmd = X,
    +       .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
            ...
     },
    ...
    };

For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ef6243ac
  41. 22 3月, 2019 1 次提交
    • J
      genetlink: make policy common to family · 3b0f31f2
      由 Johannes Berg 提交于 
      Since maxattr is common, the policy can't really differ sanely,
so make it common as well.

The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.

This reduces the size of e.g. nl80211.o (which has lots of commands):

   text	   data	    bss	    dec	    hex	filename
 398745	  14323	   2240	 415308	  6564c	net/wireless/nl80211.o (before)
 397913	  14331	   2240	 414484	  65314	net/wireless/nl80211.o (after)
--------------------------------
   -832      +8       0    -824

Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.

Most of the code transformations were done using the following spatch:
    @ops@
    identifier OPS;
    expression POLICY;
    @@
    struct genl_ops OPS[] = {
    ...,
     {
    -	.policy = POLICY,
     },
    ...
    };

    @@
    identifier ops.OPS;
    expression ops.POLICY;
    identifier fam;
    expression M;
    @@
    struct genl_family fam = {
            .ops = OPS,
            .maxattr = M,
    +       .policy = POLICY,
            ...
    };

This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3b0f31f2
  43. 21 7月, 2018 1 次提交
  45. 13 6月, 2018 1 次提交
    • K
      treewide: kmalloc() -> kmalloc_array() · 6da2ec56
      由 Kees Cook 提交于 
      The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)
Signed-off-by: NKees Cook <keescook@chromium.org>
      6da2ec56
  47. 28 3月, 2018 1 次提交