mainline inclusion
from mainline-v5.14
commit a96d9330
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a96d9330b02a3d051ae689bc2c5e7d3a2ba25594

----------------------------------------------------------------------

After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.

Fixes: 232d0d55 ("net: hns3: uninitialize command queue while unloading PF driver")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit 1a6d2819
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1a6d281946c330cee2855f6d0cd796616e54601f

----------------------------------------------------------------------

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0bc277cb
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0bc277cb8234f8e6fcf8842e318e0873dd223565

----------------------------------------------------------------------

Don't populate the array spec_opcode on the stack but instead it
static const. Makes the object code smaller by 158 bytes:

Before:
   text   data   bss     dec    hex filename
  12271   3976   128   16375   3ff7 .../hisilicon/hns3/hns3pf/hclge_cmd.o

After:
   text   data   bss     dec    hex filename
  12017   4072   128   16217   3f59 .../hisilicon/hns3/hns3pf/hclge_cmd.o

(gcc version 10.3.0)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I47Z9P

-----------------------------------------------------------------------

The memory will be leaked when driver set the port_poto_cfg invalid value.
Signed-off-by: Nchenguangli <chenguangli2@huawei.com>
Reviewed-by: Nbaowenyi <baowenyi@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I477YJ?from=project-issue

----------------------------------------------------------------------

Add one page memory for device or qp status. Set a qp error
flag in this page when device resetting. This error flag can
be seen in the userspace. It helps users to stop tasks when
device hardware occurs on the device.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I473Q4?from=project-issue

----------------------------------------------------------------------

This driver will provide all device operations as long as it's probed
successfully by vfio-pci driver.
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I473Q4?from=project-issue

----------------------------------------------------------------------

Add device status recording function for accelerator live migration driver.
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I473Q4?from=project-issue

----------------------------------------------------------------------

vfio_pci_vendor_driver_ops includes these parts:
(1) .probe() and .remove() interface to be called by vfio_pci_probe()
and vfio_pci_remove().
(2) pointer to struct vfio_device_ops. It will be registered as ops of vfio
device if .probe() succeeds.
(3) vendor modules call macro module_vfio_pci_register_vendor_handler to
generate module_init and module_exit.
(4) export functions vfio_pci_vendor_data(), vfio_pci_irq_type(),
vfio_pci_num_regions(), vfio_pci_pdev(), and functions in vfio_pci_ops,
so they are able to be called from outside modules and make them a kind of
inherited by vfio_device_ops provided by vendor modules
(5) allows a simpler VFIO_DEVICE_GET_INFO ioctl in vendor driver,
let vfio_pci know number of vendor regions and vendor irqs
(6) allows vendor driver to read/write to bars directly which is useful
in security checking condition.
(7) allows vendor driver triggers this VFIO_IRQ_TYPE_REMAP_BAR_REGION
when it wants to notify userspace to remap PCI BARs.
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I472UK?from=project-issue

----------------------------------------------------------------------

HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
actually on the AMBA bus. These fake PCI devices can support SVA via
SMMU stall feature, by setting dma-can-stall for ACPI platforms.
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I472UK?from=project-issue

----------------------------------------------------------------------

HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
actually on the AMBA bus. These fake PCI devices have PASID capability
though not supporting TLP.

Add a quirk to set pasid_no_tlp for these devices.
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I472UK?from=project-issue

----------------------------------------------------------------------

A PASID-like feature is implemented on AMBA without using TLP prefixes
and these devices have PASID capability though not supporting TLP.
Adding a pasid_no_tlp bit for "PASID works without TLP prefixes" and
pci_enable_pasid() checks pasid_no_tlp as well as eetlp_prefix_path.
Suggested-by: NBjorn Helgaas <helgaas@kernel.org>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4750I?from=project-issue

----------------------------------------------------------------------

The CTR counter is 32bit rollover default on the BD.
But the NIST standard is 128bit rollover. it cause the
testing failed, so need to fix the BD configuration.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4750I?from=project-issue

----------------------------------------------------------------------

Fix the maximum length of AAD for the CCM mode due to the hardware limited.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4751W?from=project-issue

----------------------------------------------------------------------

Fixup icv(integrity check value) checking enabled wrong on
Kunpeng 930
Signed-off-by: NKai Ye <yekai13@huawei.com>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 3e1d2c52
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=3e1d2c52b2045ba7f90966b02daeb6c438432570

----------------------------------------------------------------------

To support runtime PM, use the function 'pci_set_power_state' to change
the power state. Therefore, method _PS0 or _PR0 needs to be filled by
platform. So check whether the method is supported, if not, print a
prompt information.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 74f5edbf
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=74f5edbffcd37162084b6883e059bb6bb686151d

----------------------------------------------------------------------

To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of
debugfs function directly use 'qm' instead of 'filp'.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 607c191b
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=607c191b371d72952c11dc209e583303a4515f14

----------------------------------------------------------------------

Add runtime PM support for Kunpeng930 accelerator device.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit d7ea5339
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=d7ea53395b723b1a87b9c0afb3301cc33fbe35e6

----------------------------------------------------------------------

Accelerator devices support runtime PM to reduce power consumption.
This patch adds the runtime PM suspend/resume callbacks to the
accelerator devices.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1295292d
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=1295292d65b729fc8b234fcdf884d79ff5a63ca1

----------------------------------------------------------------------

The accelerator devices support runtime PM, when device is in suspended, an
exception will occur if reading registers. Therefore, this patch uses
'debugfs_create_file' instead of 'debugfs_create_regset32' to create
debugfs file, and then the driver can get the device status before
reading the register.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit a5262610
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I475XT?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=a52626106d6f7edf3d106c065e13a0313cfeb82f

----------------------------------------------------------------------

When the endian configuration of the hardware is abnormal, it will
cause the SEC engine is faulty that reports empty message. And it
will affect the normal function of the hardware. Currently the soft
configuration method can't restore the faulty device. The endian
needs to be configured according to the system properties. So fix it.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 90367a02
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I475XT?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/?id=90367a027a22c3a9ca8b8bac15df34d9e859fc11

----------------------------------------------------------------------

Because the algs registration process has added a judgment.
So need to add the judgment for the abnormal exiting process.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit ea5202df
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/drivers/crypto/hisilicon?id=ea5202dff79ce23e1a9fee3e1b2f09e28b77ba3a

----------------------------------------------------------------------

Kunpeng930 hpre device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables hpre dynamic clock gating by writing hardware registers.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 3d845d49
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/drivers/crypto/hisilicon?id=3d845d497b23547150fe7f9b3261ead9f4295686

----------------------------------------------------------------------

Kunpeng930 sec device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables sec dynamic clock gating by writing hardware registers.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit ed5fa39f
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/drivers/crypto/hisilicon?id=ed5fa39fa8a62fc55c1c4d53b71f3f4f08a90d22

----------------------------------------------------------------------

Kunpeng930 zip device supports dynamic clock gating. When executing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables zip dynamic clock gating by writing hardware registers.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 66192b2e
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I475XT?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/crypto/hisilicon?id=66192b2e3fd8ab97ed518d6c0240e26655a20b4b

----------------------------------------------------------------------

The open interface of the sva prefetching function is distinguish the chip
version. But the close interface of the sva prefetching function doesn't
distinguish the chip version. As a result, the sva prefetching close
operation is also performed on Kunpeng920, those registers are important
on Kunpeng920, which eventually leads to abnormal hardware problems. So
need to fix it immediately.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

virt inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46K8O
CVE: NA

------------------------

Some vendor IOMMU drivers doesn't implement their own domain_get_attr
callback or the processing of DOMAIN_ATTR_NESTING. Then
iommu_domain_get_attr may return an error. But it shouldn't affect the
result of vfio_pci_enable. We print a log to indicate the error and
return 0.
Signed-off-by: NKunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: NXinle Guo <guoxinle1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit a1fcb106
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a1fcb106ae97cc34cc8101efafb89eaa837be009

----------------------------------------------------------------------

The devlink pointer always exists after hclge_devlink_init() succeed.
Remove that check together with NULL setting after release and ensure
that devlink_register is last command prior to call to devlink_reload_enable().

Fixes: b741269b ("net: hns3: add support for registering devlink for PF")
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
(fix conflicts: interface devlink_register adapt)
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit f5c2b9f0
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5c2b9f0fc078308a88de807d60cd4e352a165fc

----------------------------------------------------------------------

In order to know the reason of link up failure, add supporting ethtool
extended link state. Driver reads the link status code from firmware if
in link down state and converts it to ethtool extended link state.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit edb40bbc
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=edb40bbc17eb589beb3cbd672d341e1505d6cdb1

----------------------------------------------------------------------

Add a new file hns3_ethtool.h, and move struct type definitions from
hns3_ethtool.c to hns3_ethtool.h.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit ddccc5e3
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ddccc5e368a33daeb6862192d4dca8e59af9234a

----------------------------------------------------------------------

Currently, four reset types are supported for the HNS3 ethernet
driver: IMP reset, global reset, function reset, and FLR. Only
FLR can now be triggered by the user. To restore the device when
an exception occurs, add support for triggering reset by ethtool.

Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to
trigger the IMP | global | function reset manually.

In addition, VF can only trigger function reset.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

zhaoxin inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I40QDN
CVE: NA

----------------------------------------------------------------

Fix some clerical mistakes in previous patch.

Fixes: 4d79e047 ("USB:Fix kernel NULL pointer when unbind UHCI form vfio-pci")
Signed-off-by: NLeoLiu-oc <LeoLiu-oc@zhaoxin.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NXie XiuQi <xiexiuqi@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 9a446cf9
category: feature
bugzilla: 175249
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9a446cf97af70ee81ba177703b67ac4955a5edcc

----------------------------------------------------------------------

Fix warning Woverflow on type conversion reported on x86_64:

  drivers/spi/spi-hisi-kunpeng.c:361:9: warning: conversion from 'long unsigned int' to 'u32'
  {aka 'unsigned int'} changes value from '18446744073709551600' to '4294967280' [-Woverflow]

The registers are 32 bit, so fix by casting to u32.

Fixes: c770d863 ("spi: Add HiSilicon SPI Controller Driver for Kunpeng SoCs")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NJay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1617762660-54681-1-git-send-email-f.fangjian@huawei.comSigned-off-by: NMark Brown <broonie@kernel.org>
Reviewed-by: NChengwen Feng <fengchengwen@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit c770d863
category: feature
bugzilla: 175249
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c770d8631e1810d8f1ce21b18ad5dd67eeb39e5c

----------------------------------------------------------------------

This driver supports SPI Controller for HiSilicon Kunpeng SoCs. This
driver supports SPI operations using FIFO mode of transfer.

DMA is not supported, and we just use IRQ mode for operation completion
notification.

Only ACPI firmware is supported.
Signed-off-by: NJay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1616836200-45827-1-git-send-email-f.fangjian@huawei.comSigned-off-by: NMark Brown <broonie@kernel.org>
Reviewed-by: NChengwen Feng <fengchengwen@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e8a4d0da
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e8a4d0daaef6fc8f965ca0b8e9585aa9698a0f24

------------------------------------------------------------------------

If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered.

When this occurs during error handling, the current policy is to allow
error handling to continue, and the inevitable nexus ha reset will handle
the required reset.

However various steps of error handling need to taken before this happens.
These also involve some level of HW interaction, which will also fail with
various timeouts.

Speed up this process by recording a HW fault bit for an internal abort
timeout - when this is set, just automatically error any HW interaction,
and essentially go straight to clear nexus ha (to reset the controller).

Link: https://lore.kernel.org/r/1623058179-80434-6-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 63ece9eb
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=63ece9eb350312ee33327269480482dfac8555db

------------------------------------------------------------------------

If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered. However if a timeout occurs
during SCSI error handling, issuing a controller reset immediately may
conflict with the error handling.

To handle internal abort in these two scenarios, only queue the reset when
not in an error handling function. In the case of a timeout during error
handling, do nothing and rely on the inevitable ha nexus reset to reset the
controller.

Link: https://lore.kernel.org/r/1623058179-80434-5-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2f12a499
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2f12a499511f40c268d6dfa4bf7fbe2344d2e6d3

------------------------------------------------------------------------

Include HZ in timer macros to make the code more concise.

Link: https://lore.kernel.org/r/1623058179-80434-4-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0f757339
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0f757339919d31533aeadbbfd62f2dd4a49e851f

------------------------------------------------------------------------

For a clear nexus reset operation, the I_T nexus resets are executed
serially for each device. For devices attached through an expander, this
may take 2s per device; so, in total, could take a long time.

Reduce the total time by running the I_T nexus resets in parallel through
async operations.

Link: https://lore.kernel.org/r/1623058179-80434-3-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 366da0da
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=366da0da1f5fe4e7e702f5864a557e57f485431f

------------------------------------------------------------------------

If an OOB event is received but the phy still fails to come up, a link
reset will be issued repeatedly at an interval of 20s until the phy comes
up.

Set a limit for link reset issue retries to avoid printing the timeout
message endlessly.

Link: https://lore.kernel.org/r/1623058179-80434-2-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit d377f415
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d377f415dddc18b33c88dcd41cfe4fe6d9db82fb

------------------------------------------------------------------------

This patch prepares for converting SAM status codes into an enum. Without
this patch converting SAM status codes into an enumeration type would
trigger complaints about enum type mismatches for the SAS code.

Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: NJack Wang <jinpu.wang@ionos.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit ab17122e
category: bugfix
bugzilla: 175270
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ab17122e758ef68fb21033e25c041144067975f5

------------------------------------------------------------------------

After commit 6c11dc06 ("scsi: hisi_sas: Fix IRQ checks") we have the
error codes returned by platform_get_irq() ready for the propagation
upsream in interrupt_init_v1_hw() -- that will fix still broken deferred
probing. Let's propagate the error codes from devm_request_irq() as well
since I don't see the reason to override them with -ENOENT...

Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ruAcked-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NSergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NOuyangdelong <ouyangdelong@huawei.com>
Signed-off-by: NNifujia <nifujia1@hisilicon.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>