- 03 12月, 2019 14 次提交
-
-
由 Emily Deng 提交于
As will call unload kms when initialize fail, and the unload kms will send event 3 and 4, so don't need event 3 and 4 in device init. Signed-off-by: NEmily Deng <Emily.Deng@amd.com> Reviewed-by: NZhan Liu <zhan.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Added max hive/node info checks per supported ASIC Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NJohn Clements <john.clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bhawanpreet Lakha 提交于
load the ta firmware for navi10/12/14. This is already being done for raven/picasso and is needed for supporting hdcp on navi Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Yintian Tao 提交于
When load amdgpu failed before create pm_sysfs and ucode_sysfs, the pm_sysfs and ucode_sysfs should not be removed. Otherwise, there will be warning call trace just like below. [ 24.836386] [drm] VCE initialized successfully. [ 24.841352] amdgpu 0000:00:07.0: amdgpu_device_ip_init failed [ 25.370383] amdgpu 0000:00:07.0: Fatal error during GPU init [ 25.889575] [drm] amdgpu: finishing device. [ 26.069128] amdgpu 0000:00:07.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) [ 26.070110] [drm:gfx_v9_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed [ 26.200309] [TTM] Finalizing pool allocator [ 26.200314] [TTM] Finalizing DMA pool allocator [ 26.200349] [TTM] Zone kernel: Used memory at exit: 0 KiB [ 26.200351] [TTM] Zone dma32: Used memory at exit: 0 KiB [ 26.200353] [drm] amdgpu: ttm finalized [ 26.205329] ------------[ cut here ]------------ [ 26.205330] sysfs group 'fw_version' not found for kobject '0000:00:07.0' [ 26.205347] WARNING: CPU: 0 PID: 1228 at fs/sysfs/group.c:256 sysfs_remove_group+0x80/0x90 [ 26.205348] Modules linked in: amdgpu(OE+) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache binfmt_misc snd_hda_codec_generic ledtrig_audio crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hda_core snd_hwdep snd_pcm snd_timer input_leds snd joydev soundcore serio_raw pcspkr evbug aesni_intel aes_x86_64 crypto_simd cryptd mac_hid glue_helper sunrpc ip_tables x_tables autofs4 8139too psmouse 8139cp mii i2c_piix4 pata_acpi floppy [ 26.205369] CPU: 0 PID: 1228 Comm: modprobe Tainted: G OE 5.2.0-rc1 #1 [ 26.205370] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 26.205372] RIP: 0010:sysfs_remove_group+0x80/0x90 [ 26.205374] Code: e8 35 b9 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f6 b5 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 48 7a 70 98 e8 60 63 d3 ff <0f> 0b eb d7 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 [ 26.205375] RSP: 0018:ffffbee242b0b908 EFLAGS: 00010282 [ 26.205376] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 26.205377] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff97ad6f817380 [ 26.205377] RBP: ffffbee242b0b920 R08: ffffffff98f520c4 R09: 00000000000002b3 [ 26.205378] R10: ffffbee242b0b8f8 R11: 00000000000002b3 R12: ffffffffc0e58240 [ 26.205379] R13: ffff97ad6d1fe0b0 R14: ffff97ad4db954c8 R15: ffff97ad4db7fff0 [ 26.205380] FS: 00007ff3d8a1c4c0(0000) GS:ffff97ad6f800000(0000) knlGS:0000000000000000 [ 26.205381] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.205381] CR2: 00007f9b2ef1df04 CR3: 000000042aab8001 CR4: 00000000003606f0 [ 26.205384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 26.205385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 26.205385] Call Trace: [ 26.205461] amdgpu_ucode_sysfs_fini+0x18/0x20 [amdgpu] [ 26.205518] amdgpu_device_fini+0x3b4/0x560 [amdgpu] [ 26.205573] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 26.205623] amdgpu_driver_load_kms+0xcd/0x250 [amdgpu] [ 26.205637] drm_dev_register+0x12b/0x1c0 [drm] [ 26.205695] amdgpu_pci_probe+0x12a/0x1e0 [amdgpu] [ 26.205699] local_pci_probe+0x47/0xa0 [ 26.205701] pci_device_probe+0x106/0x1b0 [ 26.205704] really_probe+0x21a/0x3f0 [ 26.205706] driver_probe_device+0x11c/0x140 [ 26.205707] device_driver_attach+0x58/0x60 [ 26.205709] __driver_attach+0xc3/0x140 Signed-off-by: NYintian Tao <yttao@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NNirmoy Das <nirmoy.das@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
To align with the scheme from gfx9 disabling GFX ring after VM shutdown could avoid garbage data be fetched to GFX RB which may lead to unnecessary screw up on GFX Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
since we don't have RLCG ucode loading and no SRlist as well Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
issue: kernel would report a warning from a double unpin during the driver unloading on the CSB bo why: we unpin it during hw_fini, and there will be another unpin in sw_fini on CSB bo. fix: actually we don't need to pin/unpin it during hw_init/fini since it is created with kernel pinned, we only need to fullfill the CSB again during hw_init to prevent CSB/VRAM lost after S3 v2: get_csb in init_rlc so hw_init() will make CSIB content back even after reset or s3 v3: use bo_create_kernel instead of bo_create_reserved for CSB otherwise the bo_free_kernel() on CSB is not aligned and would lead to its internal reserve pending there forever take care of gfx7/8 as well Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
otherwse the flush_gpu_tlb will hang if we unload the KMD becuase the schedulers already stopped Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
For Arcturus, increase dispatch packet number to stress scheduler. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
Clear SDMA and HDP EDC counter in GPR workarounds. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaojie Yuan 提交于
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: NZhan Liu <zhan.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaojie Yuan 提交于
srbm_mutex is to guarantee atomicity for r/w of gfx indexed registers Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 11月, 2019 7 次提交
-
-
由 Dan Carpenter 提交于
Originally the last WREG32_SOC15() was a part of the if statement block but the curly braces are on the wrong line. Fixes: bb0db70f ("drm/amdgpu: separate JPEG1.0 code out from VCN1.0") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
VI/CIK BACO was inflight when this fix landed for SOC15/NV. Add the fix to VI/CIK as well. Acked-by: NEvan Quan <evan.quan@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The documentation says the that PCI core handles this for you unless you choose to implement it. Just rely on the PCI core to handle the pci specific bits. Reviewed-by: NZhan Liu <zhan.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
gfx memory should be initialized before enabling DED and FUE field in mmGB_EDC_MODE Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jack Zhang 提交于
Currently ARCTURUS VF doesn't support jpeg ip block. Skip jpeg ip block in case guest driver load fail. Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com> Reviewed-by: NZhexi Zhang <zhexi.zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Felix Kuehling 提交于
Be less pessimistic about estimated page table use for KFD. Most allocations use 2MB pages and therefore need less VRAM for page tables. This allows more VRAM to be used for applications especially on large systems with many GPUs and hundreds of GB of system memory. Example: 8 GPUs with 32GB VRAM each + 256GB system memory = 512GB Old page table reservation per GPU: 1GB New page table reservation per GPU: 32MB Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Nxinhui pan <xinhui.pan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Felix Kuehling 提交于
Allow KFD applications to use more unpinned system memory through HMM. Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: NYong Zhao <Yong.Zhao@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 26 11月, 2019 3 次提交
-
-
由 Nathan Chancellor 提交于
Commit b0f3cd31 ("drm/amdgpu: remove unnecessary JPEG2.0 code from VCN2.0") introduced a new clang warning in the vcn_v2_0_stop function: ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: warning: variable 'r' is used uninitialized whenever 'while' loop exits because its condition is false [-Wsometimes-uninitialized] SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note: expanded from macro 'SOC15_WAIT_ON_RREG' while ((tmp_ & (mask)) != (expected_value)) { \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1083:6: note: uninitialized use occurs here if (r) ^ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: note: remove the condition if it is always true SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r); ^ ../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note: expanded from macro 'SOC15_WAIT_ON_RREG' while ((tmp_ & (mask)) != (expected_value)) { \ ^ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1072:7: note: initialize the variable 'r' to silence this warning int r; ^ = 0 1 warning generated. To prevent warnings like this from happening in the future, make the SOC15_WAIT_ON_RREG macro initialize its ret variable before the while loop that can time out. This macro's return value is always checked so it should set ret in both the success and fail path. Link: https://github.com/ClangBuiltLinux/linux/issues/776Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Updated target I2C address Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NJohn Clements <john.clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Oak Zeng 提交于
Config the translation retry behavior according to noretry kernel parameter Signed-off-by: NOak Zeng <Oak.Zeng@amd.com> Suggested-by: NJay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 23 11月, 2019 16 次提交
-
-
由 zhengbin 提交于
Fixes coccicheck warning: drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:182:40-41: WARNING: Use ARRAY_SIZE Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: Nzhengbin <zhengbin13@huawei.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 changzhu 提交于
It may lose gpuvm invalidate acknowldege state across power-gating off cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire before invalidation and semaphore release after invalidation. After adding semaphore acquire before invalidation, the semaphore register become read-only if another process try to acquire semaphore. Then it will not be able to release this semaphore. Then it may cause deadlock problem. If this deadlock problem happens, it needs a semaphore firmware fix. Signed-off-by: Nchangzhu <Changfeng.Zhu@amd.com> Acked-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 changzhu 提交于
SW must acquire/release one of the vm_invalidate_eng*_sem around the invalidation req/ack. Through this way,it can avoid losing invalidate acknowledge state across power-gating off cycle. To use vm_invalidate_eng*_sem, it needs to initialize vm_invalidate_eng*_sem firstly. Signed-off-by: Nchangzhu <Changfeng.Zhu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jack Zhang 提交于
After rlcg fw 2.1, kmd driver starts to load extra fw for LIST_CNTL,GPM_MEM,SRM_MEM. We needs to skip the three fw because all rlcg related fw have been loaded by host driver. Guest driver would load the three fw fail without this change. Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jack Zhang 提交于
Temporarily skip ras,dtm,hdcp initialize and terminate for arcturus VF Currently the three features haven't been enabled at SRIOV, it would trigger guest driver load fail with the bare-metal path of the three features. Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaojie Yuan 提交于
This patch fixes 2nd baco reset failure with gfxoff enabled on navi1x. clear state buffer (resides in vram) is corrupted after 1st baco reset, upon gfxoff exit, CPF gets garbage header in CSIB and hangs. Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Stephen Rothwell 提交于
Reviewed-by: NKevin Wang <kevin1.wang@amd.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Colin Ian King 提交于
The pointer write_frame is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
In the standard _PR3 case, the pci core handles the pci state. The driver only needs to handle it in the legacy ATPX case. This may fix issues with runtime suspend/resume on certain hybrid graphics laptops. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jay Cornwall 提交于
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dennis Li 提交于
Get mmhub error counter by accessing EDC_CNT registers. v2: Add mmhub_v9_4_ prefix for local static variable and function Signed-off-by: NDennis Li <dennis.li@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dennis Li 提交于
Add codes to print the detail EDC info for the subblock of mmhub v2: Move the EDC_CNT registers' defintion from mmhub_9_4 header files to mmhub_1_0 ones. Add mmhub_v1_0_ prefix for the local static variable and function. v3: squash in DC fix Signed-off-by: NDennis Li <dennis.li@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dennis Li 提交于
The struct soc15_ras_field_entry will be reused by other IPs, such as mmhub and gc v2: rename ras_subblock_regs to gc_ras_fields_vg20, because the future asic maybe have a different table. Signed-off-by: NDennis Li <dennis.li@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaojie Yuan 提交于
Fixes: 0bb419c7 ("drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)") Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaojie Yuan 提交于
50us is not enough to wait for cp ready after gpu reset on some navi asics. Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Suggested-by: NJack Xiao <Jack.Xiao@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Sierra 提交于
Only for the debugger use case. [why] Avoid endless translation retries, after an invalid address access has been issued to the GPU. Instead, the trap handler is forced to enter by generating a no-retry-fault. A s_trap instruction is inserted in the debugger case to let the wave to enter trap handler to save context. [how] Intentionally using an invalid flag combination (F and P set at the same time) to trigger a no-retry-fault, after a retry-fault happens. This is only valid under compute context. Signed-off-by: NAlex Sierra <alex.sierra@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-