We have to ensure that the wake up from the waitqueue and the assignment
of xprt->snd_task are atomic. We can do this by assigning the snd_task
while under the waitqueue spinlock.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow the freezer to skip wait_on_bit_killable sleeps in the sunrpc
layer. This should allow suspend and hibernate events to proceed, even
when there are RPC's pending on the wire.

Also, wrap the TASK_KILLABLE sleeps in NFS layer in freezer_do_not_count
and freezer_count calls. This allows the freezer to skip tasks that are
sleeping while looping on EJUKEBOX or NFS4ERR_DELAY sorts of errors.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

If the rpc_task gets restarted, then we want to ensure that we don't
double-count the execution time statistics, timeout data, etc.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, the caller has to change the value of task->tk_priority if
it wants to select on which priority level the task will sleep.

This patch allows the caller to select a priority level at sleep time
rather than always using task->tk_priority.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since rpc_killall_tasks may modify the rpc_task's tk_action field
without any locking, we need to be careful when dereferencing it.
Reported-by: NBen Greear <greearb@candelatech.com>
Tested-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

If the NLM daemon is killed on the NFS server, we can currently end up
hanging forever on an 'unlock' request, instead of aborting. Basically,
if the rpcbind request fails, or the server keeps returning garbage, we
really want to quit instead of retrying.
Tested-by: NVasily Averin <vvs@sw.ru>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

BUG: atomic_dec_and_test(): -1: atomic counter underflow at:
Pid: 2827, comm: mount.nfs Not tainted 2.6.38 #1
Call Trace:
 [<ffffffffa02223a0>] ? put_rpccred+0x44/0x14e [sunrpc]
 [<ffffffffa021bbe9>] ? rpc_ping+0x4e/0x58 [sunrpc]
 [<ffffffffa021c4a5>] ? rpc_create+0x481/0x4fc [sunrpc]
 [<ffffffffa022298a>] ? rpcauth_lookup_credcache+0xab/0x22d [sunrpc]
 [<ffffffffa028be8c>] ? nfs_create_rpc_client+0xa6/0xeb [nfs]
 [<ffffffffa028c660>] ? nfs4_set_client+0xc2/0x1f9 [nfs]
 [<ffffffffa028cd3c>] ? nfs4_create_server+0xf2/0x2a6 [nfs]
 [<ffffffffa0295d07>] ? nfs4_remote_mount+0x4e/0x14a [nfs]
 [<ffffffff810dd570>] ? vfs_kern_mount+0x6e/0x133
 [<ffffffffa029605a>] ? nfs_do_root_mount+0x76/0x95 [nfs]
 [<ffffffffa029643d>] ? nfs4_try_mount+0x56/0xaf [nfs]
 [<ffffffffa0297434>] ? nfs_get_sb+0x435/0x73c [nfs]
 [<ffffffff810dd59b>] ? vfs_kern_mount+0x99/0x133
 [<ffffffff810dd693>] ? do_kern_mount+0x48/0xd8
 [<ffffffff810f5b75>] ? do_mount+0x6da/0x741
 [<ffffffff810f5c5f>] ? sys_mount+0x83/0xc0
 [<ffffffff8100293b>] ? system_call_fastpath+0x16/0x1b

Well, so, I think this is real bug of nfs codes somewhere. With some
review, the code

rpc_call_sync()
    rpc_run_task
        rpc_execute()
            __rpc_execute()
                rpc_release_task()
                    rpc_release_resources_task()
                        put_rpccred()                <= release cred
    rpc_put_task
        rpc_do_put_task()
            rpc_release_resources_task()
                put_rpccred()                        <= release cred again

seems to be release cred unintendedly.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This fixes a race in which the task->tk_callback() puts the rpc_task
to sleep, setting a new callback. Under certain circumstances, the current
code may end up executing the task->tk_action before it gets round to the
callback.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

rpc_run_task can only fail if it is not passed in a preallocated task.
However, that is not at all clear with the current code.  So
remove several impossible to occur failure checks.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

queue_work() only returns 0 or 1, never a negative value.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Although they run as rpciod background tasks, under normal operation
(i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck()
and nfs4_do_close() want to be fully synchronous. This means that when we
exit, we want all references to the rpc_task to be gone, and we want
any dentry references etc. held by that task to be released.

For this reason these functions call __rpc_wait_for_completion_task(),
followed by rpc_put_task() in the expectation that the latter will be
releasing the last reference to the rpc_task, and thus ensuring that the
callback_ops->rpc_release() has been called synchronously.

This patch fixes a race which exists due to the fact that
rpciod calls rpc_complete_task() (in order to wake up the callers of
__rpc_wait_for_completion_task()) and then subsequently calls
rpc_put_task() without ensuring that these two steps are done atomically.

In order to avoid adding new spin locks, the patch uses the existing
waitqueue spin lock to order the rpc_task reference count releases between
the waiting process and rpciod.
The common case where nobody is waiting for completion is optimised for by
checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task
reference count is 1: in those cases we drop trying to grab the spin lock,
and immediately free up the rpc_task.

Those few processes that need to put the rpc_task from inside an
asynchronous context and that do not care about ordering are given a new
helper: rpc_put_task_async().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

WQ_RESCUER is now an internal flag and should only be used in the
workqueue implementation proper.  Use WQ_MEM_RECLAIM instead.

This doesn't introduce any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>

Change "return (EXPR);" to "return EXPR;"

return is not a function, parentheses are not required.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

create_workqueue() is a deprecated function.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We should just farm out asynchronous RPC tasks immediately to rpciod...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will allow us to save the original generic cred in rpc_message, so
that if we migrate from one server to another, we can generate a new bound
cred without having to punt back to the NFS layer.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that rpc_run_task() is the sole entry point for RPC calls, we can move
the remaining rpc_client-related initialisation of struct rpc_task from
sched.c into clnt.c.

Also move rpc_killall_tasks() into the same file, since that too is
relative to the rpc_clnt.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make rpc_exit() non-inline, and ensure that it always wakes up a task that
has been queued.

Kill off the now unused rpc_wake_up_task().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It has not triggered in almost a decade. Time to get rid of it...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently RPC performance metrics that tabulate elapsed time use
jiffies time values.  This is problematic on systems that use slow
jiffies (for instance 100HZ systems built for paravirtualized
environments).  It is also a problem for computing precise latency
statistics for advanced network transports, such as InfiniBand,
that can have round-trip latencies significanly faster than a single
clock tick.

For the RPC client, adopt the high resolution time stamp mechanism
already used by the network layer and blktrace: ktime.

We use ktime format time stamps for all internal computations, and
convert to milliseconds for presentation.  As a result, we need only
addition operations in the performance critical paths; multiply/divide
is required only for presentation.

We could report RTT metrics in microseconds.  In fact the mountstats
format is versioned to accomodate exactly this kind of interface
improvement.

For now, however, we'll stay with millisecond precision for
presentation to maintain backwards compatibility with the handful of
currently deployed user space tools.  At a later point, we'll move to
an API such as BDI_STATS where a finer timestamp precision can be
reported.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Also have it return an ERR_PTR(-ENOMEM) instead of a null pointer.
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move struct rpc_buffer's definition into a sunrpc.h, a common, internal
header file, in preparation for supporting the nfsv4.1 backchannel.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: #include <linux/net.h> from sunrpc.h]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We should probably not be testing any flags after we've cleared the
RPC_TASK_RUNNING flag, since rpc_make_runnable() is then free to assign the
rpc_task to another workqueue, which may then destroy it.

We can fix any races with rpc_make_runnable() by ensuring that we only
clear the RPC_TASK_RUNNING flag while holding the rpc_wait_queue->lock that
the task is supposed to be sleeping on (and then checking whether or not
the task really is sleeping).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Push it into those callback functions that actually need it.

Note that all the NFS operations use their own locking, so don't need the
BKL. Ditto for the rpcbind client.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Try to make the comment here a little more clear and concise.

Also, this macro definition seems unnecessary.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS
authentication, and then only as a special case in the code. This patch
removes the auth_sys special casing, and replaces it with generic code.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that we've tightened up the locking rules for RPC queue wakeups, we can
remove the RCU-safe kfree calls...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is designed to replace the timeout timer in the individual rpc_tasks.
By putting the timer function in the wait queue, we will eventually be able
to reduce the total number of timers in use by the RPC subsystem.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

An audit of the current RPC timeout functions shows that they don't really
ever need to run in the softirq context. As long as the softirq is
able to signal that the wakeup is due to a timeout (which it can do by
setting task->tk_status to -ETIMEDOUT) then the callback functions can just
run as standard task->tk_callback functions (in the rpciod/process
context).

The only possible border-line case would be xprt_timer() for the case of
UDP, when the callback is used to reduce the size of the transport
congestion window. In testing, however, the effect of moving that update
to a callback would appear to be minor.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In all cases where we currently use rpc_wake_up_task(), we almost always
know on which waitqueue the rpc_task is actually sleeping. This will allows
us to simplify the queue locking in a future patch.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All RPC timeout callback functions are expected to wake the task up. We can
enforce this by moving the wakeup back into rpc_run_timer.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>