Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 29 6月, 2016 20 次提交
  3. 28 6月, 2016 10 次提交
    • W
      sock_diag: do not broadcast raw socket destruction · 9a0fee2b
      由 Willem de Bruijn 提交于 
      Diag intends to broadcast tcp_sk and udp_sk socket destruction.
Testing sk->sk_protocol for IPPROTO_TCP/IPPROTO_UDP alone is not
sufficient for this. Raw sockets can have the same type.

Add a test for sk->sk_type.

Fixes: eb4cb008 ("sock_diag: define destruction multicast groups")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9a0fee2b
    • A
      connector: fix out-of-order cn_proc netlink message delivery · ab8ed951
      由 Aaron Campbell 提交于 
      The proc connector messages include a sequence number, allowing userspace
programs to detect lost messages.  However, performing this detection is
currently more difficult than necessary, since netlink messages can be
delivered to the application out-of-order.  To fix this, leave pre-emption
disabled during cn_netlink_send(), and use GFP_NOWAIT.

The following was written as a test case.  Building the kernel w/ make -j32
proved a reliable way to generate out-of-order cn_proc messages.

int
main(int argc, char *argv[])
{
	static uint32_t last_seq[CPU_SETSIZE], seq;
	int cpu, fd;
	struct sockaddr_nl sa;
	struct __attribute__((aligned(NLMSG_ALIGNTO))) {
		struct nlmsghdr nl_hdr;
		struct __attribute__((__packed__)) {
			struct cn_msg cn_msg;
			struct proc_event cn_proc;
		};
	} rmsg;
	struct __attribute__((aligned(NLMSG_ALIGNTO))) {
		struct nlmsghdr nl_hdr;
		struct __attribute__((__packed__)) {
			struct cn_msg cn_msg;
			enum proc_cn_mcast_op cn_mcast;
		};
	} smsg;

	fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
	if (fd < 0) {
		perror("socket");
	}

	sa.nl_family = AF_NETLINK;
	sa.nl_groups = CN_IDX_PROC;
	sa.nl_pid = getpid();
	if (bind(fd, (struct sockaddr *)&sa, sizeof(sa)) < 0) {
		perror("bind");
	}

	memset(&smsg, 0, sizeof(smsg));
	smsg.nl_hdr.nlmsg_len = sizeof(smsg);
	smsg.nl_hdr.nlmsg_pid = getpid();
	smsg.nl_hdr.nlmsg_type = NLMSG_DONE;
	smsg.cn_msg.id.idx = CN_IDX_PROC;
	smsg.cn_msg.id.val = CN_VAL_PROC;
	smsg.cn_msg.len = sizeof(enum proc_cn_mcast_op);
	smsg.cn_mcast = PROC_CN_MCAST_LISTEN;
	if (send(fd, &smsg, sizeof(smsg), 0) != sizeof(smsg)) {
		perror("send");
	}

	while (recv(fd, &rmsg, sizeof(rmsg), 0) == sizeof(rmsg)) {
		cpu = rmsg.cn_proc.cpu;
		if (cpu < 0) {
			continue;
		}
		seq = rmsg.cn_msg.seq;
		if ((last_seq[cpu] != 0) && (seq != last_seq[cpu] + 1)) {
			printf("out-of-order seq=%d on cpu=%d\n", seq, cpu);
		}
		last_seq[cpu] = seq;
	}

	/* NOTREACHED */

	perror("recv");

	return -1;
}
Signed-off-by: NAaron Campbell <aaron@monkey.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ab8ed951
    • D
      Bridge: Fix ipv6 mc snooping if bridge has no ipv6 address · 0888d5f3
      由 daniel 提交于 
      The bridge is falsly dropping ipv6 mulitcast packets if there is:
 1. No ipv6 address assigned on the brigde.
 2. No external mld querier present.
 3. The internal querier enabled.

When the bridge fails to build mld queries, because it has no
ipv6 address, it slilently returns, but keeps the local querier enabled.
This specific case causes confusing packet loss.

Ipv6 multicast snooping can only work if:
 a) An external querier is present
 OR
 b) The bridge has an ipv6 address an is capable of sending own queries

Otherwise it has to forward/flood the ipv6 multicast traffic,
because snooping cannot work.

This patch fixes the issue by adding a flag to the bridge struct that
indicates that there is currently no ipv6 address assinged to the bridge
and returns a false state for the local querier in
__br_multicast_querier_exists().

Special thanks to Linus Lüssing.

Fixes: d1d81d4c ("bridge: check return value of ipv6_dev_get_saddr()")
Signed-off-by: NDaniel Danzberger <daniel@dd-wrt.com>
Acked-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0888d5f3
    • W
      net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_create · f299a02d
      由 Wang Sheng-Hui 提交于 
      Commit 311c7c71 ("net/mlx5e: Allocate DMA coherent memory on
reader NUMA node") introduced mlx5_*_alloc_node() but missed changing
some calling and warn messages. This patch introduces 2 changes:
	* Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in
	  mlx5_wq_ll_create()
	* Update the failure warn messages with _node postfix for
	  mlx5_*_alloc function names

Fixes: 311c7c71 ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: NWang Sheng-Hui <shhuiw@foxmail.com>
Acked-By: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f299a02d
    • D
      Merge branch 'bgmac-fixes' · d1b5a8da
      由 David S. Miller 提交于 
      Florian Fainelli says:

====================
net: bgmac: Random fixes

This patch series fixes a few issues spotted by code inspection and
actual testing.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d1b5a8da
    • F
      net: bgmac: Remove superflous netif_carrier_on() · 3894396e
      由 Florian Fainelli 提交于 
      bgmac_open() calls phy_start() to initialize the PHY state machine,
which will set the interface's carrier state accordingly, no need to
force that as this could be conflicting with the PHY state determined by
PHYLIB.

Fixes: dd4544f0 ("bgmac: driver for GBit MAC core on BCMA bus")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3894396e
    • F
      net: bgmac: Start transmit queue in bgmac_open · c3897f2a
      由 Florian Fainelli 提交于 
      The driver does not start the transmit queue in bgmac_open(). If the
queue was stopped prior to closing then re-opening the interface, we
would never be able to wake-up again.

Fixes: dd4544f0 ("bgmac: driver for GBit MAC core on BCMA bus")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c3897f2a
    • F
      net: bgmac: Fix SOF bit checking · d2b13233
      由 Florian Fainelli 提交于 
      We are checking for the Start of Frame bit in the ctl1 word, while this
bit is set in the ctl0 word instead. Read the ctl0 word and update the
check to verify that.

Fixes: 9cde9450 ("bgmac: implement scatter/gather support")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d2b13233
    • J
      bonding: fix 802.3ad aggregator reselection · 0622cab0
      由 Jay Vosburgh 提交于 
      Since commit 7bb11dc9 ("bonding: unify all places where
actor-oper key needs to be updated."), the logic in bonding to handle
selection between multiple aggregators has not functioned.

	This affects only configurations wherein the bonding slaves
connect to two discrete aggregators (e.g., two independent switches, each
with LACP enabled), thus creating two separate aggregation groups within a
single bond.

	The cause is a change in 7bb11dc9 to no longer set
AD_PORT_BEGIN on a port after a link state change, which would cause the
port to be reselected for attachment to an aggregator as if were newly
added to the bond.  We cannot restore the prior behavior, as it
contradicts IEEE 802.1AX 5.4.12, which requires ports that "become
inoperable" (lose carrier, setting port_enabled=false as per 802.1AX
5.4.7) to remain selected (i.e., assigned to the aggregator).  As the port
now remains selected, the aggregator selection logic is not invoked.

	A side effect of this change is that aggregators in bonding will
now contain ports that are link down.  The aggregator selection logic
does not currently handle this situation correctly, causing incorrect
aggregator selection.

	This patch makes two changes to repair the aggregator selection
logic in bonding to function as documented and within the confines of the
standard:

	First, the aggregator selection and related logic now utilizes the
number of active ports per aggregator, not the number of selected ports
(as some selected ports may be down).  The ad_select "bandwidth" and
"count" options only consider ports that are link up.

	Second, on any carrier state change of any slave, the aggregator
selection logic is explicitly called to insure the correct aggregator is
active.
Reported-by: NVeli-Matti Lintu <veli-matti.lintu@opinsys.fi>
Fixes: 7bb11dc9 ("bonding: unify all places where actor-oper key needs to be updated.")
Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0622cab0
    • T
      ipmr/ip6mr: Initialize the last assert time of mfc entries. · 70a0dec4
      由 Tom Goff 提交于 
      This fixes wrong-interface signaling on 32-bit platforms for entries
created when jiffies > 2^31 + MFC_ASSERT_THRESH.
Signed-off-by: NTom Goff <thomas.goff@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      70a0dec4
  5. 27 6月, 2016 4 次提交
  7. 24 6月, 2016 6 次提交