- 11 5月, 2011 9 次提交
-
-
由 Archit Taneja 提交于
The following changes have changed from OMAP3 to OMAP4 DSI: -The register field DSI_PLL_FREQSEL in DSI_PLL_CONFIGURATION2 has been removed. -DCS_CMD_ENABLE and DCS_CMD_CODE bits have been moved from DSI_CTRL to DSI_VC_CTRLi, hence the control of the bits is available per VC. -DSI LDO powergood notification doesn't work on OMAP4. This is mentioned in OMAP4 errata revision 1.8(Errata 1.76). -OCP_WIDTH register field is included in DSI_VC_CTRL. -The SCP clock is also required to access DSI PLL registers Introduce dss features for these changes so that DSI runs on both OMAP3 and OMAP4. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
All DPI panels were missing dependency to OMAP2_DSS_DPI. Add the dependency. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
OMAP3630 has a HW bug causing DSI PLL power command POWER_ON_DIV (0x3) to not work properly. The bug prevents us from enabling DSI PLL power only to HS divider block. This patch adds a dss feature for the bug and converts POWER_ON_DIV requests to POWER_ON_ALL (0x2). Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Archit Taneja 提交于
dss.lcd_clk_source is set to the default value DSS_CLK_SRC_FCK at dss_init. For OMAP2 and OMAP3, the dss.lcd_clk_source should always be the same as dss.dispc_clk_source. The function dss_get_lcd_clk_source() always returns the default value DSS_CLK_SRC_FCK for OMAP2/3. This leads to wrong clock dumps when dispc_clk_source is not DSS_CLK_SRC_FCK. Correct this function to always return dss.dispc_clk_source for OMAP2/3. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
On OMAP4, reading DSI_PLL_CONFIGURATION2 register requires the L3 clock (CIO_CLK_ICG) to PLL. Currently dsi_dump_clocks() tries to read that register without enabling the L3 clock, leading to crash if DSI is not in use. The status of the bit being read from DSI_PLL_CONFIGURATION2 is available from dsi_clock_info->use_sys_clk, so we can avoid the whole problem by just using that. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
use_sys_clk and highfreq fields in dsi.current_cinfo were never set. Luckily they weren't used anywhere so it didn't cause any problems. This patch fixes those fields and they are now set at the same time as the rest of the fields. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
arch/arm/plat-omap/include/plat/nokia-dsi-panel.h is an include for the OMAP DSS panel driver for Nokia's DSI displays. A more logical place for it is in include/video. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 10 5月, 2011 25 次提交
-
-
由 Linus Torvalds 提交于
-
由 Hugh Dickins 提交于
Commit a626ca6a ("vm: fix vm_pgoff wrap in stack expansion") fixed the case of an expanding mapping causing vm_pgoff wrapping when you had downward stack expansion. But there was another case where IA64 and PA-RISC expand mappings: upward expansion. This fixes that case too. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6由 Linus Torvalds 提交于
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915/lvds: Only act on lid notify when the device is on drm/i915: fix intel_crtc_clock_get pipe reads after "cleanup cleanup" drm/i915: Only enable the plane after setting the fb base (pre-ILK) drm/i915/dp: Be paranoid in case we disable a DP before it is attached drm/i915: Release object along create user fb error path
-
由 Mikulas Patocka 提交于
Linux kernel excludes guard page when performing mlock on a VMA with down-growing stack. However, some architectures have up-growing stack and locking the guard page should be excluded in this case too. This patch fixes lvm2 on PA-RISC (and possibly other architectures with up-growing stack). lvm2 calculates number of used pages when locking and when unlocking and reports an internal error if the numbers mismatch. [ Patch changed fairly extensively to also fix /proc/<pid>/maps for the grows-up case, and to move things around a bit to clean it all up and share the infrstructure with the /proc bits. Tested on ia64 that has both grow-up and grow-down segments - Linus ] Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Tested-by: NTony Luck <tony.luck@gmail.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: eeepc-laptop: Use ACPI handle to identify rfkill port [PATCH] sony-laptop: limit brightness range to DSDT provided ones sony-laptop: report failures on setting LCD brightness thinkpad-acpi: module autoloading for newer Lenovo ThinkPads.
-
由 Alex Williamson 提交于
If we're using vga switcheroo, the device may be turned off and poking it can return random state. This provokes an OOPS fixed separately by 8ff887c847 (drm/i915/dp: Be paranoid in case we disable a DP before it is attached). Trying to use and respond to events on a device that has been turned off by the user is in principle a silly thing to do. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Chris Wilson 提交于
Despite the fixes in 548f245b (drm/i915: fix per-pipe reads after "cleanup"), we missed one neighbouring read that was mistakenly replaced with the reg value in 9db4a9c7 (drm/i915: cleanup per-pipe reg usage). This was preventing us from correctly determining the mode the BIOS left the panel in for machines that neither have an OpRegion nor access to the VBT, (e.g. the EeePC 700). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Chris Wilson 提交于
When enabling the plane, it is helpful to have already pointed that plane to valid memory or else we may incur the wrath of a PGTBL_ER. This code preserved the behaviour from the bad old days for unknown reasons... Found by assert_fb_bound_for_plane(). References: https://bugs.freedesktop.org/show_bug.cgi?id=36246Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Fix CODEC DAI names for Goni ASoC: Fix CODEC name in Goni davinci-mcasp: fix _CBM_CFS pin directions davinci-mcasp: fix _CBM_CFS hw_params davinci-mcasp: use bitfield definitions for PDIR ASoC: davinci-mcasp: correct tdm_slots limit
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add pci id to acer travelmate quirk for 5730 drm/radeon: fix order of doing things in radeon_crtc_cursor_set drm: mm: fix debug output drm/radeon/kms: ATPX switcheroo fixes drm/nouveau: Fix a crash at card takedown for NV40 and older cards
-
由 Linus Torvalds 提交于
* hpfs: HPFS: Remove unused variable HPFS: Move declaration up, so that there are no out-of-scope pointers HPFS: Fix some unaligned accesses HPFS: Fix endianity. Make hpfs work on big-endian machines HPFS: Implement fsync for hpfs HPFS: Fix a bug that filesystem was not marked dirty when remounting it HPFS: Restrict uid and gid to 16-bit values HPFS: When marking or clearing the dirty bit, sync the filesystem HPFS: Use types with defined width HPFS: Remove mark_inode_dirty HPFS: Remove CR/LF conversion option HPFS: Remove remaining locks HPFS: Introduce a global mutex and lock it on every callback from VFS. HPFS: Make HPFS compile on preempt and SMP
-
由 Mikulas Patocka 提交于
Remove unused variable Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Move declaration up, so that there are no out-of-scope pointers Reported-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Fix some unaligned accesses Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Fix endianity. Make hpfs work on big-endian machines. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Implement fsync for hpfs. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Fix a bug that filesystem was not marked dirty when remounting it Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Restrict uid and gid to 16-bit values. HPFS stores only 2 bytes in the EAs. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
When marking or clearing the dirty bit, sync the filesystem Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Use types with defined width Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Remove mark_inode_dirty HPFS doesn't use kernel's dirty inode indicator anyway because writing an inode requires directory's mutex. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Remove CR/LF conversion option It is unused anyway. It was used on 2.2 kernels or so. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Remove remaining locks Because of a new global per-fs lock, no other locks are needed Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Introduce a global mutex and lock it on every callback from VFS. Performance doesn't matter, reviewing the whole code for locking correctness would be too complicated, so simply lock it all. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Make HPFS compile on preempt and SMP Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2011 6 次提交
-
-
由 Matthew Garrett 提交于
The ACPI notification we get from rfkill events on these machines gives us all the information we need to identify the port that's changed. Do so rather than assuming that it's always bus 1. Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Mattia Dongili 提交于
The new style brightness control provides an operating range of 9 values (seems consistent over a large number of models sharing the same brightness control methods). Read and use the minimum and maximum values to limit the backlight interface between those boundaries. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Mattia Dongili 提交于
Check if we were successful in setting the requested brightness and report failure in that case. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Manoj Iyer 提交于
The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead of IBM0068. Added new HID so that thinkpad_acpi module will auto load on these newer Lenovo ThinkPads. Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: stable@kernel.org Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com> Signed-off-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Alex Deucher 提交于
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=34082 Reported by: Sampo Laaksonen <zhamahn@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ilija Hadzic 提交于
if object pin or object lookup in radeon_cursor_set fail, the function could leave inconsistent mouse width and hight values in radeon_crtc fixed by moving cursor width and height assignments after all checks have passed Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-