- 24 10月, 2010 6 次提交
-
-
由 Nicolas Kaiser 提交于
Fix typo in copyright notice. Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
It doesn't really matter, but if we spin, we should spin in a more relaxed manner. This way, if something goes wrong at least it won't contribute to global warming. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection). This patch fix it by: - introduce gfn_to_pfn_atomic instead of gfn_to_pfn - get the mapping gfn from kvm_mmu_page_get_gfn() And it adds 'notrap' ptes check in unsync/direct sps Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Introduce this function to get consecutive gfn's pages, it can reduce gup's overload, used by later patch Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic context, the later patch will use it Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zachary Amsden 提交于
If there are active VCPUs which are marked as belonging to a particular hardware CPU, request a clock sync for them when enabling hardware; the TSC could be desynchronized on a newly arriving CPU, and we need to recompute guests system time relative to boot after a suspend event. This covers both cases. Note that it is acceptable to take the spinlock, as either no other tasks will be running and no locks held (BSP after resume), or other tasks will be guaranteed to drop the lock relatively quickly (AP on CPU_STARTING). Noting we now get clock synchronization requests for VCPUs which are starting up (or restarting), it is tempting to attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers at this time, however it is not correct to do so; they are required for systems with non-constant TSC as the frequency may not be known immediately after the processor has started until the cpufreq driver has had a chance to run and query the chipset. Updated: implement better locking semantics for hardware_enable Removed the hack of dropping and retaking the lock by adding the semantic that we always hold kvm_lock when hardware_enable is called. The one place that doesn't need to worry about it is resume, as resuming a frozen CPU, the spinlock won't be taken. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 23 9月, 2010 1 次提交
-
-
由 Avi Kivity 提交于
When we reboot, we disable vmx extensions or otherwise INIT gets blocked. If a task on another cpu hits a vmx instruction, it will fault if vmx is disabled. We trap that to avoid a nasty oops and spin until the reboot completes. Problem is, we sleep with interrupts disabled. This blocks smp_send_stop() from running, and the reboot process halts. Fix by enabling interrupts before spinning. KVM-Stable-Tag. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 10 9月, 2010 1 次提交
-
-
由 Zachary Amsden 提交于
The CPU_STARTING callback was added upstream with the intention of being used for KVM, specifically for the hardware enablement that must be done before we can run in hardware virt. It had bugs on the x86_64 architecture at the time, where it was called after CPU_ONLINE. The arches have since merged and the bug is gone. It might be noted other features should probably start making use of this callback; microcode updates in particular which might be fixing important erratums would be best applied before beginning to run user tasks. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 02 8月, 2010 2 次提交
-
-
由 Gleb Natapov 提交于
Currently if guest access address that belongs to memory slot but is not backed up by page or page is read only KVM treats it like MMIO access. Remove that capability. It was never part of the interface and should not be relied upon. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
They are not used outside of the file. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 01 8月, 2010 11 次提交
-
-
由 Joerg Roedel 提交于
This patch converts unnecessary divide and modulo operations in the KVM large page related code into logical operations. This allows to convert gfn_t to u64 while not breaking 32 bit builds. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Huang Ying 提交于
is_hwpoison_address accesses the page table, so the caller must hold current->mm->mmap_sem in read mode. So fix its usage in hva_to_pfn of kvm accordingly. Comment is_hwpoison_address to remind other users. Reported-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
May be used for distinguishing between internal and user slots, or for sorting slots in size order. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Makes it a little more readable and hackable. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
As advertised in feature-removal-schedule.txt. Equivalent support is provided by overlapping memory regions. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Andi Kleen 提交于
When the user passed in a NULL mask pass this on from the ioctl handler. Found by gcc 4.6's new warnings. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
The type of '*new.rmap' is not 'struct page *', fix it Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Now that all arch specific ioctls have centralized locking, it is easy to move it to the central dispatcher. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
All vcpu ioctls need to be locked, so instead of locking each one specifically we lock at the generic dispatcher. This patch only updates generic ioctls and leaves arch specific ioctls alone. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Huang Ying 提交于
In common cases, guest SRAO MCE will cause corresponding poisoned page be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay the MCE to guest OS. But it is reported that if the poisoned page is accessed in guest after unmapping and before MCE is relayed to guest OS, userspace will be killed. The reason is as follows. Because poisoned page has been un-mapped, guest access will cause guest exit and kvm_mmu_page_fault will be called. kvm_mmu_page_fault can not get the poisoned page for fault address, so kernel and user space MMIO processing is tried in turn. In user MMIO processing, poisoned page is accessed again, then userspace is killed by force_sig_info. To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM and do not try kernel and user space MMIO processing for poisoned page. [xiao: fix warning introduced by avi] Reported-by: NMax Asbock <masbock@linux.vnet.ibm.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 19 5月, 2010 1 次提交
-
-
由 Avi Kivity 提交于
vmx and svm vcpus have different contents and therefore may have different alignmment requirements. Let each specify its required alignment. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 17 5月, 2010 7 次提交
-
-
由 Takuya Yoshikawa 提交于
As Avi pointed out, testing bit part in mark_page_dirty() was important in the days of shadow paging, but currently EPT and NPT has already become common and the chance of faulting a page more that once per iteration is small. So let's remove the test bit to avoid extra access. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
When CPU_UP_CANCELED, hardware_enable() has not been called at the CPU which is going up because raw_notifier_call_chain(CPU_ONLINE) has not been called for this cpu. Drop the handling for CPU_UP_CANCELED. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
The RCU/SRCU API have already changed for proving RCU usage. I got the following dmesg when PROVE_RCU=y because we used incorrect API. This patch coverts rcu_deference() to srcu_dereference() or family API. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/8550: #0: (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm] #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm] stack backtrace: Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27 Call Trace: [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm] [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm] [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm] [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm] [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel] [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm] [<ffffffff810a8692>] ? unlock_page+0x27/0x2c [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm] [<ffffffff81060cfa>] ? up_read+0x23/0x3d [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a [<ffffffff810021db>] system_call_fastpath+0x16/0x1b Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
This patch limits the number of pages per memory slot to make us free from extra care about type issues. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Takuya Yoshikawa 提交于
kvm_coalesced_mmio_init() keeps to hold the addresses of a coalesced mmio ring page and dev even after it has freed them. Also, if this function fails, though it might be rare, it seems to be suggesting the system's serious state: so we'd better stop the works following the kvm_creat_vm(). This patch clears these problems. We move the coalesced mmio's initialization out of kvm_create_vm(). This seems to be natural because it includes a registration which can be done only when vm is successfully created. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Wei Yongjun 提交于
This patch change the errno of ioctl KVM_[UN]REGISTER_COALESCED_MMIO from -EINVAL to -ENXIO if no coalesced mmio dev exists. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
This patch does: - no need call tracepoint_synchronize_unregister() when kvm module is unloaded since ftrace can handle it - cleanup ftrace's macro Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 25 4月, 2010 1 次提交
-
-
由 Takuya Yoshikawa 提交于
Marcelo introduced gfn_to_hva_memslot() when he implemented gfn_to_pfn_memslot(). Let's use this for gfn_to_hva() too. Note: also remove parentheses next to return as checkpatch said to do. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 21 4月, 2010 1 次提交
-
-
由 Lai Jiangshan 提交于
I got this dmesg due to srcu_read_lock() is missing in kvm_mmu_notifier_release(). =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/x86.h:72 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/3100: #0: (rcu_read_lock){.+.+..}, at: [<ffffffff810d73dc>] __mmu_notifier_release+0x38/0xdf #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa0130a6a>] kvm_mmu_zap_all+0x21/0x5e [kvm] stack backtrace: Pid: 3100, comm: qemu-system-x86 Not tainted 2.6.34-rc3-22949-gbc8a97a-dirty #2 Call Trace: [<ffffffff8106afd9>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa0123a89>] unalias_gfn+0x56/0xab [kvm] [<ffffffffa0119600>] gfn_to_memslot+0x16/0x25 [kvm] [<ffffffffa012ffca>] gfn_to_rmap+0x17/0x6e [kvm] [<ffffffffa01300c1>] rmap_remove+0xa0/0x19d [kvm] [<ffffffffa0130649>] kvm_mmu_zap_page+0x109/0x34d [kvm] [<ffffffffa0130a7e>] kvm_mmu_zap_all+0x35/0x5e [kvm] [<ffffffffa0122870>] kvm_arch_flush_shadow+0x16/0x22 [kvm] [<ffffffffa01189e0>] kvm_mmu_notifier_release+0x15/0x17 [kvm] [<ffffffff810d742c>] __mmu_notifier_release+0x88/0xdf [<ffffffff810d73dc>] ? __mmu_notifier_release+0x38/0xdf [<ffffffff81040848>] ? exit_mm+0xe0/0x115 [<ffffffff810c2cb0>] exit_mmap+0x2c/0x17e [<ffffffff8103c472>] mmput+0x2d/0xd4 [<ffffffff81040870>] exit_mm+0x108/0x115 [...] Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 4月, 2010 1 次提交
-
-
由 Takuya Yoshikawa 提交于
Int is not long enough to store the size of a dirty bitmap. This patch fixes this problem with the introduction of a wrapper function to calculate the sizes of dirty bitmaps. Note: in mark_page_dirty(), we have to consider the fact that __set_bit() takes the offset as int, not long. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 01 3月, 2010 7 次提交
-
-
由 Avi Kivity 提交于
The code relies on kvm->requests_lock inhibiting preemption. Noted by Jan Kiszka. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a generic function to find out the host page size for a given gfn. This function is needed by the kvm iommu code. This patch also simplifies the x86 host_mapping_level function. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
The commit 0953ca73 "KVM: Simplify coalesced mmio initialization" allocate kvm_coalesced_mmio_ring in the kvm_coalesced_mmio_init(), but didn't discard the original allocation... Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
cleanup_srcu_struct on VM destruction remains broken: BUG: unable to handle kernel paging request at ffffffffffffffff IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 RIP: 0010:[<ffffffff802533d2>] [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 Call Trace: [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm] [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm] [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel] [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm] [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm] Move it to kvm_arch_destroy_vm. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Using a similar two-step procedure as for memslots. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-