The printing message "PSP loading VCN firmware" is mis-leading because
people might think driver is loading VCN firmware. Actually when this
message is printed, driver is just preparing some VCN ucode, not loading
VCN firmware yet. The actual VCN firmware loading will be in the PSP block
hw_init. Fix the printing message
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the past, we use MMSCH to determine whether a VCN is enabled or not.
This is not reliable since after a FLR, MMSCH may report junk data.

It is better to use IP discovery data.
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: NPeng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Probably a rebase leftover.  This doesn't apply to SR-IOV, and
the non-SR-IOV code below it already handles this properly.
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add cancel_delayed_work_sync before set power gating state
to avoid race condition issue when power gating.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This should prevent writing to memory or IO ranges possibly
already allocated for other uses after our device is removed.

v5:
Protect more places wher memcopy_to/form_io takes place
Protect IB submissions

v6: Switch to !drm_dev_enter instead of scoping entire code
with brackets.

v7:
Drop guard of HW ring commands emission protection since they
are in GART and not in MMIO.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-10-andrey.grodzovsky@amd.com

This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.

The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.

v2: squash in unused variable fix (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enabled VCN support for Beige Goby chip
Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.

The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.

v2: squash in unused variable fix (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise tiling modes that require the values form this field
(In particular _*_X) would be corrupted upon video decode.

Copied from the VCN v2 code.

Fixes: 99541f39 ("drm/amdgpu: add mc resume DPG mode for VCN3.0")
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Signed-off-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise tiling modes that require the values form this field
(In particular _*_X) would be corrupted upon video decode.

Copied from the VCN v2 code.

Fixes: 99541f39 ("drm/amdgpu: add mc resume DPG mode for VCN3.0")
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Signed-off-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add VCN3 IB parsing to figure out to which instance we can send the
stream for decode.

v2: remove VCN instance limit as well, fix amdgpu_cs_find_mapping,
    check supported formats instead of unsupported.
v3: fix typo and error handling
v4: make sure the message BO is CPU accessible
v5: fix addr calculation once more
v6: only check message buffers
v7: fix constant and use defines
v8: fix create msg calculation
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NSonny Jiang <sonny.jiang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The VCN3 instances can do both decode as well as encode.

Share the scheduler load balancing score and remove fixing encode to
only the second instance.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow separate ring to share the same scheduler score.

No functional change.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Because of dpg, the rptr/wptr need to be saved on fw shared memory,
and restore them back in RBC_RB_RPTR/WPTR in kernel at power up.
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add firmware write/read point reset sync through shared memory, port from vcn2.5.
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Port from VCN2.5
SCRATCH2 is used to keep decode wptr as a workaround
which fix a hardware DPG decode wptr update bug for
vcn2.5 beforehand.
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x

Port from VCN2.5
Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x

Port from VCN2.5
SCRATCH2 is used to keep decode wptr as a workaround
which fix a hardware DPG decode wptr update bug for
vcn2.5 beforehand.
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Port from VCN2.5
Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c: In function ‘vcn_v3_0_start_sriov’:
 drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:1242:3: warning: variable ‘direct_poll’ set but not used [-Wunused-but-set-variable]

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixed warning: no previous prototype.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support software ring share memory with vcn firmware.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add dec software ring vm functions to support.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Issue:
  In the original vcn3.0 code, it assumes that the VCN's
  init_status is always 1, even after the MMSCH
  updates the header.

  This is incorrect since by default, it should be set to 0,
  and MMSCH will update it to 1 if VCN is ready.

- Fix:
  We need to read back the table header after send it to MMSCH.
  After that, if a VCN instance is not ready (host disabled it),
  we needs to disable the ring buffer as well.
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- The original logic uses a counter based index assignment,
  which is incorrect if we only assign VCN1 to this VF but no VCN0

  The doorbell index is absolute, so we can calculate it by
  using index variable i and j
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When declaring pointer data, the "*" symbol should be used adjacent to
the data name as per the coding style standards. This resolves following
issues reported by checkpatch script:
	ERROR: "foo *   bar" should be "foo *bar"
	ERROR: "foo * bar" should be "foo *bar"
	ERROR: "foo*            bar" should be "foo *bar"
	ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: NDeepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

General code indentation and alignment changes such as replace spaces
by tabs or align function arguments as per the coding style
guidelines. Issue reported by checkpatch script.
Signed-off-by: NDeepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Switch from magic numbers to defines for AV1 clockgating.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Switch from magic numbers to defines for AV1 clockgating.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only SIENNA_CICHLID(VCN3) has 2 unsymmetrical instances, there're less
codecs on instance 1, we use 0 for decode and 1 for encode.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 058c07201ec7d373fc6a0a570b38a8a9d62c29fb.
Chip NAVY_FLOUNDER uses vcn3.0, but it has only one VCN instance.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vcn ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.Skip decode_ring test in VF, because VCN in SRIOV does not
support direct register read/write.

2.Skip powergating configuration in hw fini because
VCN3.0 SRIOV doesn't support powergating.

V2: delete unneccessary white lines and refine implementation.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.In early_init and for sriov, hardcode
  harvest_config=0, enc_num=1

2.sw_init/fini
  alloc & free mm_table for sriov
  doorbell setting for sriov

3.hw_init/fini
  Under sriov, add start_sriov to config mmsch
  Skip ring_test to avoid mmio in VF, but need to initialize wptr for vcn rings.

4.Implementation for vcn_v3_0_start_sriov

V2:Clean-up some uneccessary funciton declaration.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SOC15_WAIT_ON_RREG's return value needn't always been handled by
caller. new design is to fix this kind of unused variable.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Acked-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VCN3 has 2 unsymmetrical instances, i.e there're less codecs
on instance 1, we use 0 for decode and 1 for encode for now
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable DPG mode for VCN3.0 by updating related flag.

V2: update description.
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: NJames Zhu <james.zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>