missing conversions in a couple of places
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* shift before cpu_to_le64(), not after it
* writel() converts to l-e itself
* misc missing conversions
* in set_multicast() hash_table[] is host-endian; we feed it to card
  via writel() and populate it as host-endian, so we'd better put the
  first element into it also in host-endian
* pci_unmap_single() et.al. expect host-endian, not little-endian
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

pci_unmap_single() and friends getting a little-endian address...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* usb_control_message() to/from stack (breaks on e.g. arm); some
  places did kmalloc() for buffer, some just worked from stack.
  Added kmalloc()/memcpy()/kfree() in asix_read_cmd()/asix_write_cmd(),
  removed that crap from callers.
* Fixed a leak in ax88172_bind() - on success it forgot to kfree() the
  buffer.
* Endianness bug in ax88178_bind() - we read a word from eeprom and work with
  it without converting to host-endian
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

skb->protocol is net-endian, TYVM...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

txlo_dma_addr should be host-endian; we pass it to typhoon_tso_fill(),
which does arithmetics on it, converts to l-e and passes it to card.
Unfortunately, we forgot le32_to_cpu() when initializing it from
face->txLoAddr, which sits in shared memory and is little-endian.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

rxBuffCleared is little-endian; we miss le32_to_cpu() in checks for
rx ring overruns.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

One cpu_to_le16() too many when passing argument for TYPHOON_CMD_XCVR_SELECT;
we end up passing host-endian while the hardware expects little-endian.  The
other place doing that (typhoon_start_runtime()) does the right thing, so the
card will recover at the next ifconfig up/tx timeout/resume, which limits the
amount of mess, but still, WTF?
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

in typhoon_get_drvinfo() .parm2 is little-endian; not critical
since we just get the firmware id flipped in get_drvinfo output
on big-endian boxen, but...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

txBytes and rxBytesGood are both 64bit; using le32_to_cpu() won't work
on big-endian for obvious reasons.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits)
  [IPV4]: OOPS with NETLINK_FIB_LOOKUP netlink socket
  [NET]: Fix function put_cmsg() which may cause usr application memory overflow
  [ATM]: Spelling fixes
  [NETFILTER] ipv4: Spelling fixes
  [NETFILTER]: Spelling fixes
  [SCTP]: Spelling fixes
  [NETLABEL]: Spelling fixes
  [PKT_SCHED]: Spelling fixes
  [NET] net/core/: Spelling fixes
  [IPV6]: Spelling fixes
  [IRDA]: Spelling fixes
  [DCCP]: Spelling fixes
  [NET] include/net/: Spelling fixes
  [NET]: Correct two mistaken skb_reset_mac_header() conversions.
  [IPV4] ip_gre: set mac_header correctly in receive path
  [XFRM]: Audit function arguments misordered
  [IPSEC]: Avoid undefined shift operation when testing algorithm ID
  [IPV4] ARP: Remove not used code
  [TG3]: Endianness bugfix.
  [TG3]: Endianness annotations.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Spelling fixes
  [SPARC64]: Spelling fixes
  [SPARC64]: Fix OOPS in dma_sync_*_for_device()

Increase the mininum number of partial slabs to keep around and put
partial slabs to the end of the partial queue so that they can add
more objects.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[ Regression added by changeset:
	cd40b7d3
	[NET]: make netlink user -> kernel interface synchronious
  -DaveM ]

nl_fib_input re-reuses incoming skb to send the reply. This means that this
packet will be freed twice, namely in:
- netlink_unicast_kernel
- on receive path
Use clone to send as a cure, the caller is responsible for kfree_skb on error.

Thanks to Alexey Dobryan, who originally found the problem.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: intel_cacheinfo.c: cpu cache info entry for Intel Tolapai
  x86: fix die() to not be preemptible

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Initialise current offset in xfs_file_readdir correctly
  [XFS] Fix mknod regression

After reading the directory contents into the temporary buffer, we grab
each dirent and pass it to filldir witht eh current offset of the dirent.
The current offset was not being set for the first dirent in the temporary
buffer, which coul dresult in bad offsets being set in the f_pos field
result in looping and duplicate entries being returned from readdir.

SGI-PV: 974905
SGI-Modid: xfs-linux-melb:xfs-kern:30282a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

This was broken by my '[XFS] simplify xfs_create/mknod/symlink prototype',
which assigned the re-shuffled ondisk dev_t back to the rdev variable in
xfs_vn_mknod. Because of that i_rdev is set to the ondisk dev_t instead of
the linux dev_t later down the function.

Fortunately the fix for it is trivial: we can just remove the assignment
because xfs_revalidate_inode has done the proper job before unlocking the
inode.

SGI-PV: 974873
SGI-Modid: xfs-linux-melb:xfs-kern:30273a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

This patch adds a cpu cache info entry for the Intel Tolapai cpu.
Signed-off-by: NJason Gaston <jason.d.gaston@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Andrew "Eagle Eye" Morton noticed that we use raw_local_save_flags()
instead of raw_local_irq_save(flags) in die(). This allows the
preemption of oopsing contexts - which is highly undesirable. It also
causes CONFIG_DEBUG_PREEMPT to complain, as reported by Miles Lane.

this bug was introduced via:

  commit 39743c9e
  Author: Andi Kleen <ak@suse.de>
  Date:   Fri Oct 19 20:35:03 2007 +0200

      x86: use raw locks during oopses

-               spin_lock_irqsave(&die.lock, flags);
+               __raw_spin_lock(&die.lock);
+               raw_local_save_flags(flags);

that is not a correct open-coding of spin_lock_irqsave(): both the
ordering is wrong (irqs should be disabled _first_), and the wrong
flags-saving API was used.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When used function put_cmsg() to copy kernel information to user 
application memory, if the memory length given by user application is 
not enough, by the bad length calculate of msg.msg_controllen, 
put_cmsg() function may cause the msg.msg_controllen to be a large 
value, such as 0xFFFFFFF0, so the following put_cmsg() can also write 
data to usr application memory even usr has no valid memory to store 
this. This may cause usr application memory overflow.

int put_cmsg(struct msghdr * msg, int level, int type, int len, void *data)
{
    struct cmsghdr __user *cm
        = (__force struct cmsghdr __user *)msg->msg_control;
    struct cmsghdr cmhdr;
    int cmlen = CMSG_LEN(len);
    ~~~~~~~~~~~~~~~~~~~~~
    int err;

    if (MSG_CMSG_COMPAT & msg->msg_flags)
        return put_cmsg_compat(msg, level, type, len, data);

    if (cm==NULL || msg->msg_controllen < sizeof(*cm)) {
        msg->msg_flags |= MSG_CTRUNC;
        return 0; /* XXX: return error? check spec. */
    }
    if (msg->msg_controllen < cmlen) {
    ~~~~~~~~~~~~~~~~~~~~~~~~
        msg->msg_flags |= MSG_CTRUNC;
        cmlen = msg->msg_controllen;
    }
    cmhdr.cmsg_level = level;
    cmhdr.cmsg_type = type;
    cmhdr.cmsg_len = cmlen;

    err = -EFAULT;
    if (copy_to_user(cm, &cmhdr, sizeof cmhdr))
        goto out;
    if (copy_to_user(CMSG_DATA(cm), data, cmlen - sizeof(struct cmsghdr)))
        goto out;
    cmlen = CMSG_SPACE(len);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
    If MSG_CTRUNC flags is set, msg->msg_controllen is less than 
CMSG_SPACE(len), "msg->msg_controllen -= cmlen" will cause unsinged int 
type msg->msg_controllen to be a large value.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
    msg->msg_control += cmlen;
    msg->msg_controllen -= cmlen;
    ~~~~~~~~~~~~~~~~~~~~~
    err = 0;
out:
    return err;
}

The same promble exists in put_cmsg_compat(). This patch can fix this 
problem.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  debug: add end-of-oops marker
  sched: rt: account the cpu time during the tick

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: use bio_add_page
  dm: merge max_hw_sector
  dm: trigger change uevent on rename
  dm crypt: fix write endio
  dm mpath: hp requires scsi
  dm: table detect io beyond device

Fix possible max_phys_segments violation in cloned dm-crypt bio.

In write operation dm-crypt needs to allocate new bio request
and run crypto operation on this clone. Cloned request has always
the same size, but number of physical segments can be increased
and violate max_phys_segments restriction.

This can lead to data corruption and serious hardware malfunction.
This was observed when using XFS over dm-crypt and at least
two HBA controller drivers (arcmsr, cciss) recently.

Fix it by using bio_add_page() call (which tests for other
restrictions too) instead of constructing own biovec.

All versions of dm-crypt are affected by this bug.

Cc: stable@kernel.org
Cc:  dm-crypt@saout.de
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Make sure dm honours max_hw_sectors of underlying devices

  We still have no firm testing evidence in support of this patch but
  believe it may help to resolve some bug reports.  - agk
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>