eDP spec states that when sink enconters a problem that prevents it
to keep PSR running it should set PSR status to internal error and
set the reason why it happen to PSR_ERROR_STATUS but it is not how it
was implemented.
But also I don't want to change this behavior, who knows if there is
a panel out there that only set the PSR_ERROR_STATUS.

So here refactoring the code a bit to make more easy to read what was
state above as more checks will be added to this function.

v2:
returning a int instead of a bool in psr_get_status_and_error_status()

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-2-jose.souza@intel.com

PSR2 HW only support a limited number of bits per pixel, if mode has
more than supported PSR2 should not be enabled.

BSpec: 50422
BSpec: 7713
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128014852.214135-1-jose.souza@intel.com

The "err" label is not really "err", but rather "out" since the return
path is shared between error condition and normal path. This broke when
commit 03cea610 ("drm/i915/dsb: fix extra warning on error path
handling") added a "dsb->cmd_buf = NULL;" there, making DSB to stop
working since now all writes would pass-through via mmio.

Remove the set to NULL since it's actually not needed: we only set it if
all steps are successful. While at it, rename the label so this confusion
doesn't happen again.

Fixes: 03cea610 ("drm/i915/dsb: fix extra warning on error path handling")
Resolves: https://gitlab.freedesktop.org/drm/intel/issues/8Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221119.384754-1-lucas.demarchi@intel.com

Migrate away from the legacy encoder->crtc and connector->encoder links
in the debugfs display_info code. Other users still remain so can't kill
these off yet.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-10-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Let's make the display info more useful by dumping both
the uapi and hw states for each crtc/plane.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-9-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Use the canonical "[CRTC:%d:%s]" format for the obj id/name
in the debugfs display_info dump. Everyone should already be
familiar with the format since it's used in the debug logs
extensively.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-8-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Make out life easier by just grabbing all modeset locks around
the display_info dump.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-7-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

No point in repeating the crtc mode for each cloned encoder.
Just print it once, and avoid using multiple lines for it.
And while at let's polish the fixed mode print to fit on
one line as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-6-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Pull the crtc dumping stuff into a nice function so the
loop over the crtcs doesn't look like crap.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-5-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Eliminate the special cases for the primary and cursor planes and just
dump all the information consistently for all the planes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-4-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Switch to using intel_ types in the  debugfs display_info code.
Should make it easier to handle bigjoiner etc. in the future.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-3-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Use DRM_RECT_FMT & co. to simpify the code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129185434.25549-2-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

It's hard to see what is going on when the function mixes drm_
and intel_ types. Switch to intel_ types.

v2: Deal with another use of 'intel_crtc' being introduced
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105171447.22111-2-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

The bspec tells us 'Program SHPD_FILTER_CNT with the "500 microseconds
adjusted" value before enabling hotplug detection' on CNP+.  We haven't
been touching this register at all thus far, but we should probably
follow the bspec's guidance.

The register also exists on LPT and SPT, but there isn't any specific
guidance I can find on how we should be programming it there so let's
leave it be for now.

Bspec: 4342
Bspec: 31297
Bspec: 8407
Bspec: 49305
Bspec: 50473
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221314.575575-3-matthew.d.roper@intel.com

When looking at SDEISR to determine the connection status of combo
outputs, we should use the phy index rather than the port index.
Although they're usually the same thing, EHL's DDI-D (port D) is
attached to PHY-A and SDEISR doesn't even have bits for a "D" output.
It's also possible that future platforms may map DDIs (the internal
display engine programming units) to PHYs (the output handling on the IO
side) in ways where port!=phy, so let's look at the PHY index by
default.

v2: Rename to intel_combo_phy_connected.  (Lucas)

Fixes: 719d2400 ("drm/i915/ehl: Enable DDI-D")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221314.575575-2-matthew.d.roper@intel.com

The South Display is part of the PCH so we should technically be basing
our port detection logic off the PCH in use rather than the platform
generation.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127221314.575575-1-matthew.d.roper@intel.com

LPT/WPT only have PCH transcoder A. Make sure we poke at its
chicken register instead of some non-existent register when
FDI is being driven by pipe B or C.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128182358.14477-1-ville.syrjala@linux.intel.comReviewed-by: NUma Shankar <uma.shankar@intel.com>

As the gen6 page directory is written on binding and after every update,
the code ended up duplicated. Refactor the code into a single routine to
share the locking and serialisation.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191201140916.2128905-1-chris@chris-wilson.co.uk

Now that many threads may try to use the same mmio to flush the global
buffers after updating the PTE, serialise access to the mmio to prevent
concurrent access on gen7.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191130162320.1683424-1-chris@chris-wilson.co.uk

Move our "wait for the PD load to complete" paranoia before the
MI_SET_CONTEXT just in case the context restore tries to access local
addresses.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191130120503.1609483-1-chris@chris-wilson.co.uk

After much hair pulling, resort to preallocating the ppGTT entries on
init to circumvent the apparent lack of PD invalidate following the
write to PP_DCLV upon switching mm between contexts (and here the same
context after binding new objects). However, the details of that PP_DCLV
invalidate are still unknown, and it appears we need to reload the mm
twice to cover over a timing issue. Worrying.

Fixes: 3dc007fe ("drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129201328.1398583-1-chris@chris-wilson.co.uk

Keep the engine awake and so avoid frequent cycling in and out of
powersaving mode to eliminate the unnecessary overhead and speed up the
testing.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129222702.1456292-1-chris@chris-wilson.co.uk

As we only cancel the timers asynchronously, they may
still be running on another CPU as we shutdown, raising one last
softirq. So be safe and make sure the tasklet is flushed before
destroying the engine's memory.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129172542.1222810-1-chris@chris-wilson.co.uk

Though the context is closed and so no more requests can be added to the
timeline, retirement can still be removing requests. It can even be
removing the very request we are inspecting and so cause us to wander
into dead links.

Serialise with the retirement by taking the timeline->mutex used for
guarding the timeline->requests list.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112404
Fixes: 4a317415 ("drm/i915/gem: Refine occupancy test in kill_context()")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129151845.1092933-1-chris@chris-wilson.co.uk

skl_commit_modeset_enables() straight up compares dirty_pipes
with a bitmask of already committed pipes. If we set bits in
dirty_pipes for non-existent pipes that comparison will never
work right. So let's limit ourselves to bits that exist.

And we'll do the same for the active_pipes_changed bitmask.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011200949.7839-5-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

Since commit c45e788d ("drm/i915/tgl: Suspend pre-parser across GTT
invalidations"), we now disable the advanced preparser on Tigerlake for the
invalidation phase at the start of the batch, we no longer need to emit
the GPU relocations from a second context as they are now flushed inlined.

References: 8a9a9827 ("drm/i915: use a separate context for gpu relocs")
References: c45e788d ("drm/i915/tgl: Suspend pre-parser across GTT invalidations")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129124846.949100-1-chris@chris-wilson.co.uk

Wait on only the last request on the kernel_context after emitting a
barrier so that we do not wait for everything in general and by doing so
cause an accidental emission of the barrier!

Bugzilla; https://bugs.freedesktop.org/show_bug.cgi?id=112405Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129103455.744389-1-chris@chris-wilson.co.uk

Be paranoid and make sure the drm_mm is locked whenever we insert/remove
our own nodes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129095659.665381-1-chris@chris-wilson.co.uk

Use the normal sgt_iter to walk the pages scatterlist on free so that we
handle the error path correctly.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112225Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128232946.546831-1-chris@chris-wilson.co.uk

Implement Wa_1604555607 (set the DS pairing timer to 128 cycles).
FF_MODE2 is part of the register state context, that's why it is
implemented here.

At TGL A0 stepping, FF_MODE2 register read back is broken, hence
disabling the WA verification.

v2: Rebased on top of the WA refactoring (Oscar)
v3: Correctly add to ctx_workarounds_init (Michel)
v4:
  uncore read is used [Tvrtko]
  Macros as used for MASK definition [Chris]
v5:
  Skip the Wa_1604555607 verification [Ram]
  i915 ptr retrieved from engine. [Tvrtko]
v6:
  Added wa_add as a wrapper for __wa_add [Chris]
  wa_add is directly called instead of new wrapper [tvrtko]

BSpec: 19363
HSDES: 1604555607
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NRamalingam C <ramlingam.c@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v5]
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128021005.3350-1-ramalingam.c@intel.com

After obtaining a local reference to the vm from the context, remember
to drop it before it goes out of scope!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128185402.110678-1-chris@chris-wilson.co.uk

Don't rely on the RUNTIME_INFO() when we loop over a particular context
and only run on a filtered set of engines.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127223252.3777141-1-chris@chris-wilson.co.uk

We have a case of a mysteriously absent pulse, so dump the engine
details to see if we can find out what happened to it.

References: https://bugs.freedesktop.org/show_bug.cgi?id=112405Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128102546.3857140-1-chris@chris-wilson.co.uk

One does not lightly add a new hidden struct_mutex dependency deep within
the execbuf bowels! The immediate suspicion in seeing the whitelist
cached on the context, is that it is intended to be preserved between
batches, as the kernel is quite adept at caching small allocations
itself. But no, it's sole purpose is to serialise command submission in
order to save a kmalloc on a slow, slow path!

By removing the whitelist dependency from the context, our freedom to
chop the big struct_mutex is greatly augmented.

v2: s/set_bit/__set_bit/ as the whitelist shall never be accessed
concurrently.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128113424.3885958-1-chris@chris-wilson.co.uk

The design of our interrupt handlers is that we ack the receipt of the
interrupt first, inside the critical section where the master interrupt
control is off and other cpus cannot start processing the next
interrupt; and then process the interrupt events afterwards. However,
Icelake introduced a whole new set of banked GT_IIR that are inherently
serialised and slow to retrieve the IIR and must be processed within the
critical section. We can still push our breadcrumbs out of this critical
section by using our irq_worker. On bdw+, this should not make too much
of a difference as we only slightly defer the breadcrumbs, but on icl+
this should make a big difference to our throughput of interrupts from
concurrently executing engines.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127115813.3345823-1-chris@chris-wilson.co.uk

The expected downside to commit 58b4c1a0 ("drm/i915: Reduce nested
prepare_remote_context() to a trylock") was that it would need to return
-EAGAIN to userspace in order to resolve potential mutex inversion. Such
an unsightly round trip is unnecessary if we could atomically insert a
barrier into the i915_active_fence, so make it happen.

Currently, we use the timeline->mutex (or some other named outer lock)
to order insertion into the i915_active_fence (and so individual nodes
of i915_active). Inside __i915_active_fence_set, we only need then
serialise with the interrupt handler in order to claim the timeline for
ourselves.

However, if we remove the outer lock, we need to ensure the order is
intact between not only multiple threads trying to insert themselves
into the timeline, but also with the interrupt handler completing the
previous occupant. We use xchg() on insert so that we have an ordered
sequence of insertions (and each caller knows the previous fence on
which to wait, preserving the chain of all fences in the timeline), but
we then have to cmpxchg() in the interrupt handler to avoid overwriting
the new occupant. The only nasty side-effect is having to temporarily
strip off the RCU-annotations to apply the atomic operations, otherwise
the rules are much more conventional!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112402
Fixes: 58b4c1a0 ("drm/i915: Reduce nested prepare_remote_context() to a trylock")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127134527.3438410-1-chris@chris-wilson.co.uk

Now that we rapidly park the GT when the GPU idles, we often find
ourselves idling faster than the RC6 promotion timer. Thus if we tell
the GPU to enter RC6 manually as we park, we can do so quicker (by
around 50ms, half an EI on average) and marginally increase our
powersaving across all execlists platforms.

v2: Now with a selftest to check we can enter RC6 manually
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127095657.3209854-1-chris@chris-wilson.co.uk

During the Display Interrupt Service routine the Display Interrupt
Enable bit must be disabled, The interrupts handled, then the
Display Interrupt Enable bit must be set to prevent possible missed
interrupts.

Bspec: 49212
V2: Change Title to remove SDE reference.
V3: Fix TAB spacing.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121201455.2558-1-clinton.a.taylor@intel.com

Starting with gen12, PORT_A can be connected to a transcoder
with audio support. Modify the existing logic that disabled
audio on PORT_A unconditionally.
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125125313.17584-1-kai.vehmanen@linux.intel.com

According to BSpec 53998, there is a mask of
max 8 SAGV/QGV points we need to support.

Bumping this up to keep the CI happy(currently
preventing tests to run), until all SAGV
changes land.

v2: Fix second plane where QGV points were
    hardcoded as well.

v3: Change the naming of I915_NUM_SAGV_POINTS
    to be I915_NUM_QGV_POINTS, as more meaningful
    (Ville Syrjälä)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112189Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125160800.14740-1-stanislav.lisovskiy@intel.com
[vsyrjala: Add missing braces around else (checkpatch), fix Bugzilla tag]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>