- 24 1月, 2007 1 次提交
-
-
由 Linas Vepstas 提交于
A flag was recently added to the elevator code to avoid performing an unplug when reuests are being re-queued. The goal of this flag was to avoid a deep recursion that can occur when re-queueing requests after a SCSI device/host reset. See http://lkml.org/lkml/2006/5/17/254 However, that fix added the flag near the bottom of a case statement, where an earlier break (in an if statement) could transport one out of the case, without setting the flag. This patch sets the flag earlier in the case statement. I re-discovered the deep recursion recently during testing; I was told that it was a known problem, and the fix to it was in the kernel I was testing. Indeed it was ... but it didn't fix the bug. With the patch below, I no longer see the bug. Signed-off by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: NJens Axboe <axboe@suse.de> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 1月, 2007 39 次提交
-
-
由 Jeff Chua 提交于
Seems to be some left-over debug code. Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Horms 提交于
this patch fills in the portions for ia64 kexec. Signed-off-by: NSimon Horman <horms@verge.net.au> Cc: "Zou, Nanhai" <nanhai.zou@intel.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Horms 提交于
Mohan Kumar suggested making kexec-tools-testing.tar.gz a link to the latest version. I have done this and this patch updates the documentation accordingly. Signed-off-by: NSimon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Saveliev 提交于
This patch fixes a confusion reiserfs has for a long time. On release file operation reiserfs used to try to pack file data stored in last incomplete page of some files into metadata blocks. After packing the page got cleared with clear_page_dirty. It did not take into account that the page may be mmaped into other process's address space. Recent replacement for clear_page_dirty cancel_dirty_page found the confusion with sanity check that page has to be not mapped. The patch fixes the confusion by making reiserfs avoid tail packing if an inode was ever mmapped. reiserfs_mmap and reiserfs_file_release are serialized with mutex in reiserfs specific inode. reiserfs_mmap locks the mutex and sets a bit in reiserfs specific inode flags. reiserfs_file_release checks the bit having the mutex locked. If bit is set - tail packing is avoided. This eliminates a possibility that mmapped page gets cancel_page_dirty-ed. Signed-off-by: NVladimir Saveliev <vs@namesys.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Currently one can specify an arbitrary node mask to mbind that includes nodes not allowed. If that is done with an interleave policy then we will go around all the nodes. Those outside of the currently allowed cpuset will be redirected to the border nodes. Interleave will then create imbalances at the borders of the cpuset. This patch restricts the nodes to the currently allowed cpuset. The RFC for this patch was discussed at http://marc.theaimsgroup.com/?t=116793842100004&r=1&w=2Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Paul Jackson <pj@sgi.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Gross 提交于
The following patch fixes a few problems with the tlclk driver. * bug in the select_amcb1_transmit_clock * racy read sys call * racy open sys call * use of add_timer where mod_timer would be better * change to the timer data parameter use Signed-off-by: NMark Gross <mark.gross@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen, Kenneth W 提交于
For large size DIO that needs multiple bio, one full page worth of data was lost at the boundary of bio's maximum sector or segment limits. After a bio is full and got submitted. The outer while (nbytes) { ... } loop will allocate a new bio and just march on to index into next page. It just forgets about the page that bio_add_page() rejected when previous bio is full. Fix it by put the rejected page back to pvec so we pick it up again for the next bio. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jamie Lenehan 提交于
This fixes the SH rtc driver correctly act on the "enabled" flag when setting an alarm. Signed-off-by: NJamie Lenehan <lenehan@twibble.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
If a page is marked as dirty in the guest pte, set_pte_common() can set the writable bit on newly-instantiated shadow pte. This optimization avoids a write fault after the initial read fault. However, if a write fault instantiates the pte, fix_write_pf() incorrectly reports the fault as a guest page fault, and the guest oopses on what appears to be a correctly-mapped page. Fix is to detect the condition and only report a guest page fault on a user access to a kernel page. With the fix, a kvm guest can survive a whole night of running the kernel hacker's screensaver (make -j9 in a loop). Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
The various bit string instructions (bts, btc, etc.) fail to adjust the address correctly if the bit address is beyond BITS_PER_LONG. This bug creeped in as the emulator originally relied on cr2 to contain the memory address; however we now decode it from the mod r/m bits, and must adjust the offset to account for large bit indices. The patch is rather large because it switches src and dst decoding around, so that the bit index is available when decoding the memory address. This fixes workloads like the FC5 installer. Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
The kvm mmio read path looks like: 1. guest read faults 2. kvm emulates read, calls emulator_read_emulated() 3. fails as a read requires userspace help 4. exit to userspace 5. userspace emulates read, kvm sets vcpu->mmio_read_completed 6. re-enter guest, fault again 7. kvm emulates read, calls emulator_read_emulated() 8. succeeds as vcpu->mmio_read_emulated is set 9. instruction completes and guest is resumed A problem surfaces if the userspace exit (step 5) also requests an interrupt injection. In that case, the guest does not re-execute the original instruction, but the interrupt handler. The next time an mmio read is exectued (likely for a different address), step 3 will find vcpu->mmio_read_completed set and return the value read for the original instruction. The problem manifested itself in a few annoying ways: - little squares appear randomly on console when switching virtual terminals - ne2000 fails under nfs read load - rtl8139 complains about "pci errors" even though the device model is incapable of issuing them. Fix by skipping interrupt injection if an mmio read is pending. A better fix is to avoid re-entry into the guest, and re-emulating immediately instead. However that's a bit more complex. Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
This makes the vmwrite errors on vm shutdown go away. Signed-off-by: NAvi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
The paravirt subsystem is still in flux so all exports from it are definitely internal use only. The APIs around this /will/ change. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Sing the praises of `gcc -W'. Would have prevented that blockdev direct-IO bug. Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
size_t is unsigned. IO errors aren't getting through. Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Venkatesh Pallipadi 提交于
Commit f2802e7f and its x86 version (b7471c6d) adds nmi_known_cpu() check while parsing boot options in x86_64 and i386. With that, "nmi_watchdog=2" stops working for me on Intel Core 2 CPU based system. The problem is, setup_nmi_watchdog is called while parsing the boot option and identify_cpu is not done yet. So, the return value of nmi_known_cpu() is not valid at this point. So revert that check. This should not have any adverse effect as the nmi_known_cpu() check is done again later in enable_lapic_nmi_watchdog(). Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
export profile_hits() on !SMP too. Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Bottomley 提交于
The current PDA code, which went in in post 2.6.19 has a flaw in that it doesn't correctly cycle the GDT and %GS segment through the boot PDA, the CPU PDA and finally the per-cpu PDA. The bug generally doesn't show up if the boot CPU id is zero, but everything falls apart for a non zero boot CPU id. The basically kills voyager which is perfectly capable of doing non zero CPU id boots, so voyager currently won't boot without this. The fix is to be careful and actually do the GDT setups correctly. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: (84 commits) [JFFS2] debug.h: include <linux/sched.h> for current->pid [MTD] OneNAND: Handle DDP chip boundary during read-while-load [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs [MTD] OneNAND: Implement read-while-load [MTD] OneNAND: fix onenand_wait bug in read ecc error [MTD] OneNAND: release CPU in cycles [MTD] OneNAND: add subpage write support [MTD] OneNAND: fix onenand_wait bug [JFFS2] use the ref_offset macro [JFFS2] Reschedule in loops [JFFS2] Fix error-path leak in summary scan [JFFS2] add cond_resched() when garbage collecting deletion dirent [MTD] Nuke IVR leftovers [MTD] OneNAND: fix oob handling in recent oob patch [MTD] Fix ssfdc blksize typo [JFFS2] replace kmalloc+memset with kzalloc [MTD] Fix SSFDC build for variable blocksize. [MTD] ESB2ROM uses PCI [MTD] of_device-based physmap driver [MTD] Support combined RedBoot FIS directory and configuration area ...
-
由 Herbert Xu 提交于
Both "=r" and "=g" breaks my build on i386: $ make CC [M] drivers/kvm/vmx.o {standard input}: Assembler messages: {standard input}:3318: Error: bad register name `%sil' make[1]: *** [drivers/kvm/vmx.o] Error 1 make: *** [_module_drivers/kvm] Error 2 The reason is that setbe requires an 8-bit register but "=r" does not constrain the target register to be one that has an 8-bit version on i386. According to http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153 the correct constraint is "=q". Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: fix pci-driver kernel-doc PCI: rework Documentation/pci.txt PCI: Unhide the SMBus on the Asus P4P800-X
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: unusual_devs.h entry for nokia 6233 USB: Fix for typo in ohci-ep93xx.c USB: disable USB_MULTITHREAD_PROBE USB: add vendor/device id for Option GT Max 3.6 cards USB: unusual_devs.h for 0x046b:ff40 USB: make usbhid ignore Imation Disc Stakka USB: rndis_host: fix crash while probing a Nokia S60 mobile USB: asix: Detect internal PHY and enable/use accordingly usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touched
-
由 Randy Dunlap 提交于
Function short description should be on only one line. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Grundler 提交于
Rewrite Documentation/pci.txt: o restructure document to match how API is used when writing init code. o update to reflect changes in struct pci_driver function pointers. o removed language on "new style vs old style" device discovery. "Old style" is now deprecated. Don't use it. Left description in to document existing driver behaviors. o add section "Legacy I/O Port free driver" by Kenji Kaneshige http://lkml.org/lkml/2006/11/22/25 (renamed to "pci_enable_device_bars() and Legacy I/O Port space") o add "MMIO space and write posting" section to help avoid common pitfall when converting drivers from IO Port space to MMIO space. Orignally posted http://lkml.org/lkml/2006/2/27/24 o many typo/grammer/spelling corrections from Randy Dunlap o two more spelling corrections from Stephan Richter o fix CodingStyle as per Randy Dunlap Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Unhide the SMBus on the Asus P4P800-X (and probably some other models of the family.) This gives access to the memory module SPD EEPROMs. Thanks to Winbond for supporting the lm-sensors project with the donation of this motherboard. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Manuel Osdoba 提交于
In appendix a patch for the nokia 6233 mobile phone is included. The patch is against 2.6.20-rc5. It is my first patch. Hopefully it has the right format. The code makes my nokia 6233 on my computer work. From: Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Petr Stetiar 提交于
Attached patch fixes typo in USB driver reported by Chase Douglas on linux-cirrus mailing list. http://www.freelists.org/archives/linux-cirrus/12-2006/msg00003.htmlSigned-off-by: NPetr Stetiar <ynezz@true.cz> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Disable the USB_MULTITHREAD_PROBE option because it causes crashes on people's machines and they never remember to actually read the config help files. No one likes this, everyone hates it, I'm going to go eat worms... The full logic will be ripped out later. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7814Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
American Megatrends did something wrong in their floppy emulator. It breaks with both kinds of MODE SENSE which our stack sends. Alan and I tried a few tweaks, and got LUNs sensed right, but US_FL_NO_WP_DETECT is still needed. I set the firmware bracket to 1.00 exactly, in case AMI or Sun fix it with a firmware update. Hey, you never know. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
on request of the sourceforge project for this device, a kind of robotized CD storage, it should be ignored by the generic driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Gollub 提交于
Bug fix for driver rndis_host which fixes rndis_host probing certain Nokia S60 (Series 60) mobiles. While the rndis_host get probed by usbnet and tries to bind the Nokia mobile the bind is going to fail. The rndis_host module tries to release the device, in a wrong way, which cause the oops. Fixes Bugzilla #7201 Signed-off-by: NDaniel Gollub <dgollub@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andres Salomon 提交于
Different AX88772 dongles use different PHYs; the chip is capable of using both a primary and secondary PHY, and supports an internal and external PHY. It appears that some DUB-E100 devices use the internal PHY, so trying to use an external one will not work (note that this is different across revisions, as well; the "A" and "B" revs of the DUB-E100 use different PHYs!). The data sheet for the AX88772 chip specifies that the internal PHY id will be 0x10, so if that's read from the EEPROM, we should use that rather than attempting to use an external PHY. Thanks to Mitch Bradley for pointing this out! Signed-off-by: NAndres Salomon <dilinger@debian.org> Cc: David Hollis <dhollis@davehollis.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
ITM screens send invalid x/y data when not touched. this was fixes a while ago but the problem is if the screen is not touched anymore the driver never does not report BTN_TOUCH as zero. fix it by sending the report with the last valid coordinates when pressure is released. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: J.P. Delport <jpdelport@csir.co.za> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Add backup superblock info to ocfs2_fs.h ocfs2: cleanup ocfs2_iget() errors ocfs2: Directory c/mtime update fixes ocfs2: Don't print errors when following symlinks
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: sis190: failure to set the MAC address from EEPROM Fix phy_read/write redefinition errors in ucc_geth_phy.c Update ucc_geth.c for new workqueue structure myri10ge: update driver version to 1.2.0 myri10ge: check that we can get an irq myri10ge: make wc_fifo usage load-time tunable 8139cp: Don't blindly enable interrupts [PATCH] bcm43xx: Fix failure to deliver PCI-E interrupts
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv HighPoint 2310 support (88SX7042) libata: fix handling of port actions in per-dev action mask libata: initialize qc->dma_dir to DMA_NONE sata_via: add PCI ID 0x5337 libata doc: "error : unterminated entity reference exceptions"
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (30 commits) [SCSI] qla1280: set residual correctly [SCSI] fusion: bump version [SCSI] fusion: MODULE_VERSION support [SCSI] fusion: power pc and miscellaneous bug fixs [SCSI] fusion: fibre channel: return DID_ERROR for MPI_IOCSTATUS_SCSI_IOC_TERMINATED [SCSI] megaraid_sas: Update module author [SCSI] 3ware 8000 serialize reset code [SCSI] sr: fix error code check in sr_block_ioctl() [SCSI] scsi: lpfc error path fix [SCSI] aacraid: Product List Update [SCSI] libiscsi: fix senselen calculation [SCSI] iscsi: simplify IPv6 and IPv4 address printing [SCSI] iscsi: newline in printk [SCSI] iscsi: fix crypto_alloc_hash() error check [SCSI] iscsi: fix 2.6.19 data digest calculation bug [SCSI] scsi_scan: fix report lun problems with CDROM or RBC devices [SCSI] qla2xxx: Update version number to 8.01.07-k4. [SCSI] qla2xxx: Use generic isp_ops.fw_dump() function. [SCSI] qla2xxx: Perform a fw-dump when an ISP23xx RISC-paused state is detected. [SCSI] qla2xxx: Correct reset handling logic. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklist HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage HID: add missing RX, RZ and RY enum values to hid-debug output HID: hid/hid-input.c doesn't need to include linux/usb/input.h HID: compilation fix when DEBUG_DATA is defined HID: proper LED-mapping for SpaceNavigator HID: update MAINTAINERS entry for USB-HID HID: GEYSER4_ISO needs quirk HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUT
-