The current driver sets the request's dma addr (mReq->req.dma) to 0 to
mark the DMA address as not valid. However some gadget drivers
(e.g. gadgetfs) set the request's dma addr to DMA_ADDR_INVALID to mark
the address as invalid. This leads to bogus data send because the
ci13xxx_udc driver assumes the request has already been mapped.

This patch fixes the problem, by using DMA_ADDR_INVALID instead of 0
to mark the request's DMA address as invalid.
Tested-by: NPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Under certain circumstances lockdep finds an inconsistent lock state in
gadgetfs. The problem can be reproduced with a hardware using the
ci13xxx_udc driver and the gadgetfs test program (needs a patch to support
the ci13xxx_udc, though):
	http://www.linux-usb.org/gadget/usb.c
Start the test program, wait to initialize, then press Ctrl+c.

This patch fixes the following problem by using spin_lock_irqsave()
instead of spin_lock().

=================================
[ INFO: inconsistent lock state ]
3.1.0-rc6+ #158
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
usb/113 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&dev->lock)->rlock){?.....}, at: [<bf000340>] gadgetfs_disconnect+0x14/0x80 [gadgetfs]
{IN-HARDIRQ-W} state was registered at:
  [<c00596b8>] mark_irqflags+0x14c/0x1ac
  [<c0059bf8>] __lock_acquire+0x4e0/0x8f0
  [<c005a698>] lock_acquire+0x98/0x1a8
  [<c02f10e0>] _raw_spin_lock+0x54/0x8c
  [<bf000340>] gadgetfs_disconnect+0x14/0x80 [gadgetfs]
  [<c0229104>] _gadget_stop_activity+0xd4/0x154
  [<c022b130>] isr_reset_handler+0x34/0x1c0
  [<c022c320>] udc_irq+0x204/0x228
  [<c0069018>] handle_irq_event_percpu+0x64/0x3a0
  [<c0069390>] handle_irq_event+0x3c/0x5c
  [<c006ae5c>] handle_level_irq+0x8c/0x10c
  [<c0068a34>] generic_handle_irq+0x30/0x44
  [<c0009b2c>] handle_IRQ+0x30/0x84
  [<c0008ef8>] __irq_svc+0x38/0x60
  [<c0009c58>] default_idle+0x30/0x34
  [<c0009e30>] cpu_idle+0x9c/0xd8
  [<c04056f4>] start_kernel+0x278/0x2bc
irq event stamp: 6412
hardirqs last  enabled at (6412): [<c02f1cd0>] _raw_spin_unlock_irqrestore+0x30/0x5c
hardirqs last disabled at (6411): [<c02f1278>] _raw_spin_lock_irqsave+0x20/0xa0
softirqs last  enabled at (6381): [<c002833c>] irq_exit+0xa0/0xa8
softirqs last disabled at (6372): [<c002833c>] irq_exit+0xa0/0xa8

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&dev->lock)->rlock);
  <Interrupt>
    lock(&(&dev->lock)->rlock);

 *** DEADLOCK ***

1 lock held by usb/113:
 #0:  (udc_lock#2){+.+.+.}, at: [<c02286c0>] usb_gadget_unregister_driver+0x34/0x88

stack backtrace:
[<c000d41c>] (unwind_backtrace+0x0/0xf0) from [<c0058e98>] (print_usage_bug+0x144/0x1c4)
[<c0058e98>] (print_usage_bug+0x144/0x1c4) from [<c0059144>] (mark_lock_irq+0x22c/0x274)
[<c0059144>] (mark_lock_irq+0x22c/0x274) from [<c00592d4>] (mark_lock+0x148/0x3e0)
[<c00592d4>] (mark_lock+0x148/0x3e0) from [<c0059668>] (mark_irqflags+0xfc/0x1ac)
[<c0059668>] (mark_irqflags+0xfc/0x1ac) from [<c0059bf8>] (__lock_acquire+0x4e0/0x8f0)
[<c0059bf8>] (__lock_acquire+0x4e0/0x8f0) from [<c005a698>] (lock_acquire+0x98/0x1a8)
[<c005a698>] (lock_acquire+0x98/0x1a8) from [<c02f10e0>] (_raw_spin_lock+0x54/0x8c)
[<c02f10e0>] (_raw_spin_lock+0x54/0x8c) from [<bf000340>] (gadgetfs_disconnect+0x14/0x80 [gadgetfs])
[<bf000340>] (gadgetfs_disconnect+0x14/0x80 [gadgetfs]) from [<c0229104>] (_gadget_stop_activity+0xd4/0x154)
[<c0229104>] (_gadget_stop_activity+0xd4/0x154) from [<c0229240>] (ci13xxx_stop+0xbc/0x17c)
[<c0229240>] (ci13xxx_stop+0xbc/0x17c) from [<c022867c>] (usb_gadget_remove_driver+0x88/0x98)
[<c022867c>] (usb_gadget_remove_driver+0x88/0x98) from [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88)
[<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) from [<bf0003e8>] (dev_release+0x14/0x48 [gadgetfs])
[<bf0003e8>] (dev_release+0x14/0x48 [gadgetfs]) from [<c00cc158>] (__fput+0xa4/0x1f0)
[<c00cc158>] (__fput+0xa4/0x1f0) from [<c00c7f28>] (filp_close+0x5c/0x74)
[<c00c7f28>] (filp_close+0x5c/0x74) from [<c00c7fe8>] (sys_close+0xa8/0x150)
[<c00c7fe8>] (sys_close+0xa8/0x150) from [<c00092a0>] (ret_fast_syscall+0x0/0x38)
Tested-by: NPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The dynamic jack allocation of the MIDI gadget currently links all
external jacks to one single instance of an embedded jack. According to
the spec, this is only valid if these streams always carry the same data
stream, as described in the USB MIDI 1.0 spec, chapter 3.3.1.

Also, genius Windows 7(tm) terminates it's life cycle instantly with a
blue screen of death once a device with more than one input and output
port with the current implementation is connected.

While at it, and because it grew again by this change, allocate the
temporary function pointer list on the heap, not on the stack.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The USB-IF CV compliance tester is getting stricter, and it would
be valid for it to fail a mass-storage device that accepts an
invalid USB_BULK_RESET_REQUEST request. Although it doesn't do
that yet, let's be proactive and fix that now.

Suggested by Alan Stern.
Signed-off-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The latest USB-IF CV tester checks for a valid length for this
request.
Signed-off-by: NPaul Zimmerman <paulz@synopsys.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix up the following section mismatch warnings:

WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0xf5d): Section
mismatch in reference from the function usbhs_mod_probe() to the function
.devinit.text:usbhs_mod_host_probe() The function usbhs_mod_probe() references
the function __devinit usbhs_mod_host_probe().  This is often because
usbhs_mod_probe lacks a __devinit annotation or the annotation of
usbhs_mod_host_probe is wrong.

WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0xfd7): Section
mismatch in reference from the function usbhs_mod_probe() to the function
.devexit.text:usbhs_mod_host_remove() The function usbhs_mod_probe() references
a function in an exit section.  Often the function usbhs_mod_host_remove() has
valid usage outside the exit section and the fix is to remove the __devexit
annotation of usbhs_mod_host_remove.

WARNING: drivers/usb/renesas_usbhs/renesas_usbhs.o(.text+0x1005): Section
mismatch in reference from the function usbhs_mod_remove() to the function
.devexit.text:usbhs_mod_host_remove() The function usbhs_mod_remove()
references a function in an exit section.  Often the function
usbhs_mod_host_remove() has valid usage outside the exit section and the fix is
to remove the __devexit annotation of usbhs_mod_host_remove.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch fixup bogus conversion of
8a9775ab
(usb: gadget: renesas_usbhs: fix compile warning)
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Since renesas_usbhs mod_host didn't use
struct completion as static object, the warning of lockdep came out.
This patch fixup this issue.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix compile error in file drivers/usb/gadget/fsl_udc_core.c.

drivers/usb/gadget/fsl_udc_core.c: In function 'portscx_device_speed':
drivers/usb/gadget/fsl_udc_core.c:1720: error: 'speed' undeclared (first
use in this function)

Introduced in commit e538dfda
(usb: Provide usb_speed_string() function)
Signed-off-by: NAlexander Aring <a.aring@phytec.de>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The "BCLR" in CFIFOCTR/DnFIFOCTR can flush the fifo of "CPU side" only.
To flush the fifo of "SIE side", we have to use the "ACLRM" in PIPEnCTR.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The udc-newstyle needs device_register in probe() of platform_device.
If it doesn't call, kernel panic happens in the sysfs_create_dir() when
we run modprobe a gadget driver.

[ balbi@ti.com : fix compile warning introduced by this patch ]
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB_MUSB_HDRC depends on USB_GADGET_DUALSPEED.  If HDRC is selected
but DUALSPEED is not, the kernel oopses:

[    3.132781] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    3.141296] pgd = c0004000
[    3.144134] [00000000] *pgd=00000000
[    3.147918] Internal error: Oops: 5 [#1] SMP
[    3.152404] Modules linked in:
[    3.155609] CPU: 0    Not tainted  (3.1.0-rc9-wl+ #417)
[    3.161132] PC is at composite_setup+0x738/0xbb4
[    3.165985] LR is at vprintk+0x400/0x47c
[    3.170135] pc : [<c031df90>]    lr : [<c004c150>]    psr: 60000093
[    3.170135] sp : c065dd50  ip : dfb1f0fc  fp : c065ddbc
[    3.182220] r10: 00000000  r9 : df8fcae8  r8 : df8fcaa0
[    3.187713] r7 : 00000000  r6 : df8eaa20  r5 : dfae8ea0  r4 : 00000000
[    3.194580] r3 : df8fcae8  r2 : 00010002  r1 : c065dc40  r0 : 00000047
[    3.201446] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    3.209228] Control: 10c53c7d  Table: 8000404a  DAC: 00000015
[    3.215270] Process swapper (pid: 0, stack limit = 0xc065c2f8)
[    3.221405] Stack: (0xc065dd50 to 0xc065e000)
[...]
[    3.415405] [<c031df90>] (composite_setup+0x738/0xbb4) from [<c0310d18>] (musb_g_ep0_irq+0x9d0/0xaf8)
[    3.425109] [<c0310d18>] (musb_g_ep0_irq+0x9d0/0xaf8) from [<c030fb04>] (musb_interrupt+0xb48/0xc74)
[    3.434722] [<c030fb04>] (musb_interrupt+0xb48/0xc74) from [<c030fc98>] (generic_interrupt+0x68/0x80)
[    3.444458] [<c030fc98>] (generic_interrupt+0x68/0x80) from [<c0095204>] (handle_irq_event_percpu+0x9c/0x234)
[    3.454925] [<c0095204>] (handle_irq_event_percpu+0x9c/0x234) from [<c00953e8>] (handle_irq_event+0x4c/0x6c)
[    3.465270] [<c00953e8>] (handle_irq_event+0x4c/0x6c) from [<c0097e10>] (handle_fasteoi_irq+0xd8/0x110)
[    3.475158] [<c0097e10>] (handle_fasteoi_irq+0xd8/0x110) from [<c0094d2c>] (generic_handle_irq+0x34/0x3c)
[    3.485260] [<c0094d2c>] (generic_handle_irq+0x34/0x3c) from [<c0014ae4>] (handle_IRQ+0x88/0xc8)
[    3.494537] [<c0014ae4>] (handle_IRQ+0x88/0xc8) from [<c00085b0>] (asm_do_IRQ+0x18/0x1c)
[    3.503051] [<c00085b0>] (asm_do_IRQ+0x18/0x1c) from [<c0429e78>] (__irq_svc+0x38/0xc0)

This patch changes Kconfig so that USB_GADGET_DUALSPEED is selected
automatically by USB_MUSB_HDRC.
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ARCH_U8500 covers both MACH_U8500 and MACH_U5500
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Those are simply giving information about the current
state of the UDC, nothing really fancy. We can let
everybody read those.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

usb_gadget_disconnect() is responsible of removing
data pullups. Before doing that we must, first, tell
gadget driver we're disconnecting (by calling disconnect
method on gadget driver structure), unbind the gadget
driver and stop the controller.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

that has already being done by udc-core.c. It's
unnecessary and might cause issues with some gadget
drivers.

Tested: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We should not be using dev_get_drvdata() because we
never call dev_set_drvdata(). Let's use container_of()
as all other sysfs attributes.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'for-usb-linus' of ra.kernel.org:/pub/scm/linux/kernel/git/sarah/xhci:
  usb, xhci: Clear warm reset change event during init
  xhci: Set slot and ep0 flags for address command.
  usb, xhci: fix lockdep warning on endpoint timeout

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...

Mountpoint crossing is similar to following procfs symlinks - we do
not get ->d_revalidate() called for dentry we have arrived at, with
unpleasant consequences for NFS4.

Simple way to reproduce the problem in mainline:

    cat >/tmp/a.c <<'EOF'
    #include <unistd.h>
    #include <fcntl.h>
    #include <stdio.h>
    main()
    {
            struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1};
            if (fcntl(0, F_SETLK, &fl))
                    perror("setlk");
    }
    EOF
    cc /tmp/a.c -o /tmp/test

then on nfs4:

    mount --bind file1 file2
    /tmp/test < file1		# ok
    /tmp/test < file2		# spews "setlk: No locks available"...

What happens is the missing call of ->d_revalidate() after mountpoint
crossing and that's where NFS4 would issue OPEN request to server.

The fix is simple - treat mountpoint crossing the same way we deal with
following procfs-style symlinks.  I.e.  set LOOKUP_JUMPED...

Cc: stable@kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Fix live annotation in the --stdio interface
  perf top tui: Don't recalc column widths considering just the first page
  perf report: Add progress bar when processing time ordered events
  perf hists browser: Warn about lost events
  perf tools: Fix a typo of command name as trace-cmd
  perf hists: Fix recalculation of total_period when sorting entries
  perf header: Fix build on old systems
  perf ui browser: Handle K_RESIZE in dialog windows
  perf ui browser: No need to switch char sets that often
  perf hists browser: Use K_TIMER
  perf ui: Rename ui__warning_paranoid to ui__error_paranoid
  perf ui: Reimplement the popup windows using libslang
  perf ui: Reimplement ui__popup_menu using ui__browser
  perf ui: Reimplement ui_helpline using libslang
  perf ui: Improve handling sigwinch a bit
  perf ui progress: Reimplement using slang
  perf evlist: Fix grouping of multiple events

Commit 32aaeffb (Merge branch
'modsplit-Oct31_2011'...) caused some build errors. Fix these
and make sure we always have export.h or module.h included
for MODULE_ and EXPORT_SYMBOL users:

$ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \
  grep -L linux/module.h
  arch/arm/mach-omap2/dsp.c
  arch/arm/mach-omap2/mailbox.c
  arch/arm/mach-omap2/omap-iommu.c
  arch/arm/mach-omap2/smartreflex.c

Also check we either have export.h or module.h included
for the files exporting symbols:

$ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \
  grep -L linux/export.h | xargs grep -L linux/module.h

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Include linux/export.h to fix below build warning:

  CC      arch/arm/plat-omap/omap_device.o
arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class
arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  forcedeth: fix a few sparse warnings (variable shadowing)
  forcedeth: Improve stats counters
  forcedeth: remove unneeded stats updates
  forcedeth: Acknowledge only interrupts that are being processed
  forcedeth: fix race when unloading module
  MAINTAINERS/rds: update maintainer
  wanrouter: Remove kernel_lock annotations
  usbnet: fix oops in usbnet_start_xmit
  ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined
  etherh: Add MAINTAINERS entry for etherh
  bonding: comparing a u8 with -1 is always false
  sky2: fix regression on Yukon Optima
  netlink: clarify attribute length check documentation
  netlink: validate NLA_MSECS length
  i825xx:xscale:8390:freescale: Fix Kconfig dependancies
  macvlan: receive multicast with local address
  tg3: Update version to 3.121
  tg3: Eliminate timer race with reset_task
  tg3: Schedule at most one tg3_reset_task run
  tg3: Obtain PCI function number from device
  ...

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes the following sparse warnings:
drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rx byte count was off; instead use the hardware's count.  Tx packet
count was counting pre-TSO packets; instead count on-the-wire packets.
Report hardware dropped frame count as rx_fifo_errors.

- The count of transmitted packets reported by the forcedeth driver
  reports pre-TSO (TCP Segmentation Offload) packet counts and not the
  count of the number of packets sent on the wire. This change fixes
  the forcedeth driver to report the correct count. Fixed the code by
  copying the count stored in the NIC H/W to the value reported by the
  driver.

- Count rx_drop_frame errors as rx_fifo_errors:
  We see a lot of rx_drop_frame errors if we disable the rx bottom-halves
  for too long.  Normally, rx_fifo_errors would be counted in this case.
  The rx_drop_frame error count is private to forcedeth and is not
  reported by ifconfig or sysfs.  The rx_fifo_errors count is currently
  unused in the forcedeth driver.  It is reported by ifconfig as overruns.
  This change reports rx_drop_frame errors as rx_fifo_errors.
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function ndo_get_stats() updates most of the stats from hardware
registers, making the manual updates un-needed. This change removes
these manual updates. Main exception is rx_missed_errors which needs
manual update.

Another exception is rx_packets, still updated manually in this commit
to make sure this patch doesn't change behavior of driver. This will
be addressed by a future patch.
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to avoid a race, accidentally acknowledging an interrupt that
we didn't notice and won't immediately process.  This is based solely
on code inspection; it is not known if there was an actual bug here.
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When forcedeth module is unloaded, there exists a path that can lead
to mod_timer() after del_timer_sync(), causing an oops. This patch
short-circuits this unneeded path, which originates in
nv_get_ethtool_stats().

Tested:
  x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic
  + rmmod/modprobe/ifconfig in a loop

Initial-Author: Salman Qazi <sqazi@google.com>
Discussion: http://patchwork.ozlabs.org/patch/123548/Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

since it uses the module facilities.
Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For the files which are not themselves modular, we can change
them to include only the smaller export.h since all they are
doing is looking for EXPORT_SYMBOL.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These files didn't exist at the time of the module.h split, and
so were not fixed by the commits on that baseline.  Since they use
the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the
new export.h file included that provides them.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

update for the actual maintainer
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BKL is gone, these annotations are useless.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491ec
SKB can be NULL at this point, at least for cdc-ncm.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not
defined.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>