- 04 8月, 2010 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
With these defines now it is possible to use gpio_request(GPIO_FN_LCDC1_SELECT, NULL) or ...LCDC0... respectively to switch between the two LCDC instances. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
On AP4EVB board, it is possible to select LCD panel type which are parallel or MIPI by SW3, SW43 dip-switch. This patch add parallel LCD settings and select menu to Kconfig. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 30 7月, 2010 2 次提交
-
-
由 Magnus Damm 提交于
Introduce SHMOBILE_TIMER_HZ for SH-Mobile. Allow users to select HZ on their system to minimize potential timer drift. Use 128 Hz as default to work well with the 32768 Hz RCLK. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Magnus Damm 提交于
NR_IRQS_LEGACY is now defined in asm/irq.h, so drop it in mach/irqs.h. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 6月, 2010 6 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
MMC0/SDHI1 (CN7) can be selected by dip switch. And card voltage can be selected by jumper pin. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
This patch updates the irq numbers for MMCIF to make use of evt2irq(). Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 31 5月, 2010 6 次提交
-
-
由 Paul Mundt 提交于
The FSI changes introduced IS_ERR_VALUE() checks for error conditions, despite clk_get() handing back a pointer. Switch these over to IS_ERR() like the rest of the code. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
SH7372 can use DMA with the SCI serial driver. Add required slave IDs and slave descriptors. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
The ap4evb board is equipped with two card slots: one SD-card slot and one SD-/MMC-card slot. The latter is connected to the second SDHI interface on sh7372 (SDHI1). Its power supply can be jumpered either to 1.8 or 3.3V, we fix it at default 1.8V for now. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
This adds DMA support for the sh7372 sh-mobile ARM core, using the shdma dmaengine driver, and uses DMA for the SDHI SD-card controller on this SoC. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 5月, 2010 3 次提交
-
-
由 Guennadi Liakhovetski 提交于
The current SH7372 setup code registers 7 SCIF ports, which is wrong. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
ap4evb uses an LCD, connected to the SoC over the MIPI bus. This patch adds platform data to configure this display and a static clock activation. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: NDamian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Define clock objects for switching on and off clocks for LCDC0, LCDC1 and MIPI DSI-Tx. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 5月, 2010 6 次提交
-
-
由 Magnus Damm 提交于
This patch is V2 of clock framework tables/code for sh7377. MSTP support is included for the following hardware blocks: KEYSC, SCIF, IIC, IRDA, FLCTL, USB, SDHI and UIO. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch is V2 of clock framework tables/code for sh7367. MSTP support is included for the following hardware blocks: KEYSC, SCIF, IIC, IRDA, FLCTL, VOU, SIU, USB, SDHI and UIO. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Fixes for the sh7372 clock framework: - remove unused #include <linux/platform_device.h> - add sh7372 prefix to user modifiable root clocks - put modifiable root clock prototypes in header file - fix off-by-one id error on VEU MSTP clocks - make arrays static Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch updates the irq numbers on sh7372/AP4EVB to make use of evt2irq() and intcs_evt2irq(). Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch updates the irq numbers on sh7377/G4EVM to make use of evt2irq() and intcs_evt2irq(). Makes the system cope with an updated INTCS_VECT_BASE. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch updates the irq numbers on sh7367/G3EVM to make use of evt2irq() and intcs_evt2irq(). Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 5月, 2010 8 次提交
-
-
由 Magnus Damm 提交于
Extend VMALLOC_END to the I/O Window at 0xe6000000. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch sets CONSISTENT_DMA_SIZE to 158 MB for all SH-Mobile ARM processors. The DMA area is mapped at 0xf6000000 - 0xffdfffff, on top of the 256 MB I/O window at 0xe6000000. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch is V2 of clock framework tables/code for sh7372. MSTP are included for KEYSC, SCIF, IIC, USB, SDHI and UIO. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Teach SH-Mobile ARM how to make use of the shared SH clock framework. This commit is one atomic switch that dumps the local hackery and instead links in the shared clock framework code in drivers/sh. A few local functions are kept in clock.c. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Allow users to build the TMU driver on SH-Mobile ARM. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add support for the sh7372 INTCS interrupt controller. INTCS is the interrupt controller for the sh7372 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor. INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Change INTCS_VECT_BASE from 0x3400 to 0x2200. The old value 0x3400 gave the INTCA and INTCS interrupt conrollers separated spaces, but required ARM support for more than 512 NR_IRQS which is not in place at this point. The value 0x2200 will make some of the INTCA interrupts make use of empty INTCS areas. This is a bit more error prone but works fine as a workaround for G3, G3 and AP4. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 18 5月, 2010 1 次提交
-
-
由 Russell King 提交于
GENERIC_TIME is now enabled by default, so 'select GENERIC_TIME' is redundant. Remove them. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 4月, 2010 2 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 07 4月, 2010 4 次提交
-
-
由 Kuninori Morimoto 提交于
This patch add SDHI support for G4 board. Current gpio frame work doesn't have the method to control only pull-up/down/free. So, it have special gpio_pull_up function for SDHI. It is quick hack, so this function should be replaced by correct gpio frame work in future. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Add support for the sh7377 INTCS interrupt controller. INTCS is the interrupt controller for the sh7377 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor. INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add support for the sh7367 INTCS interrupt controller. INTCS is the interrupt controller for the sh7367 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor. INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-