- 10 5月, 2021 2 次提交
-
-
由 Sebastian Reichel 提交于
Some standard resolutions like 1366x768 do not work properly with i.MX6 SoCs, since the horizontal resolution needs to be aligned to 8 pixels (so 1360x768 or 1368x768 would work). This patch allocates framebuffers allocated to 8 pixels. The extra time required to send the extra pixels are removed from the blank time. In order to expose the correct display size to userspace, the stride is increased without increasing the width. Without this patch systems with this display resolution hang indefinitely during boot up. Suggested-by: NBoris Brezillon <boris.brezillon@collabora.com> Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210428222953.235280-3-sebastian.reichel@collabora.comSigned-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Daniel Vetter 提交于
drm_atomic_helper_commit_hw_done() is the last thing (no plane cleanup apparrently), so it's the entire function. And a nice comment explaining why the wait_for_flip_done is ahead, unlike the usual sequence. Aside, I think since the atomic helpers do track plane disabling now separately this might no longer be a real problem since: commit 21a01abb Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Sep 4 12:48:37 2017 +0200 drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3. Plus the subsequent bugfixes of course, this was tricky to get right. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 25 3月, 2021 1 次提交
-
-
由 Pan Bian 提交于
Put DRM device on initialization failure path rather than directly return error code. Fixes: a67d5088 ("drm/imx: drop explicit drm_mode_config_cleanup") Signed-off-by: NPan Bian <bianpan2016@163.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 06 11月, 2020 1 次提交
-
-
由 Daniel Vetter 提交于
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: NSam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: NMaxime Ripard <mripard@kernel.org> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
-
- 26 10月, 2020 1 次提交
-
-
由 Philipp Zabel 提交于
Use drmm_mode_config_init() and drop the explicit calls to drm_mode_config_cleanup(). Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 20 7月, 2020 1 次提交
-
-
由 Philipp Zabel 提交于
Component driver structures allocated with devm_kmalloc() in bind() are freed automatically after unbind(). Since the contained drm structures are accessed afterwards in drm_mode_config_cleanup(), move the allocation into probe() to extend the driver structure's lifetime to the lifetime of the device. This should eventually be changed to use drm resource managed allocations with lifetime of the drm device. We also need to ensure that all componets are available during the unbind() so we need to call component_unbind_all() before we free non-devres resources like planes. Note this patch fixes the the use after free bug but introduces a possible boot loop issue. The issue is triggered if the HDMI support is enabled and a component driver always return -EPROBE_DEFER, see discussion [1] for more details. [1] https://lkml.org/lkml/2020/3/24/1467 Fixes: 17b5001b ("imx-drm: convert to componentised device support") Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix: fix imx_tve_probe()] [m.felsch@pengutronix: resort component_unbind_all()) [m.felsch@pengutronix: adapt commit message] Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 10 6月, 2020 2 次提交
-
-
由 Thomas Zimmermann 提交于
DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver to their defaults. No functional changes are made. Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Reviewed-by: NEmil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-17-tzimmermann@suse.de
-
由 Thomas Zimmermann 提交于
Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Reviewed-by: NEmil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-16-tzimmermann@suse.de
-
- 02 4月, 2020 1 次提交
-
-
由 Thomas Zimmermann 提交于
The imx driver uses empty implementations for its encoders. Replace the code with the generic simple encoder. Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-9-tzimmermann@suse.de
-
- 19 3月, 2020 1 次提交
-
-
由 Ville Syrjälä 提交于
It's not at all clear what cloning options this driver supports. So let's just clear possible_clones instead of setting it to some bogus value. v2: Adjust the FIXME (Daniel) Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211162208.16224-5-ville.syrjala@linux.intel.com
-
- 17 7月, 2019 1 次提交
-
-
由 Sam Ravnborg 提交于
Drop use of the deprecated drmP.h header file. While touching the include files divide them in blocks and sort the include files within each block. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NEmil Velikov <emil.velikov@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-18-sam@ravnborg.org
-
- 22 6月, 2019 1 次提交
-
-
由 Daniel Vetter 提交于
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: NEric Anholt <eric@anholt.net> Reviewed-by: NEmil Velikov <emil.velikov@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-18-daniel.vetter@ffwll.ch
-
- 21 6月, 2019 1 次提交
-
-
由 Daniel Vetter 提交于
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: NEmil Velikov <emil.velikov@collabora.com> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
-
- 22 2月, 2019 1 次提交
-
-
由 Philipp Zabel 提交于
Add a zpos property to planes. Call drm_atomic_helper_check() instead of calling drm_atomic_helper_check_modeset() and drm_atomic_check_planes() manually. This effectively adds a call to drm_atomic_normalize_zpos() before checking planes. Reorder atomic update to allow changing plane zpos without modeset. Note that the initial zpos is set in ipu_plane_state_reset(). The initial value set in ipu_plane_init() is just for show. The zpos parameter of drm_plane_create_zpos_property() is ignored because the newly created plane do not have state yet. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Tested-by: NMarius Vlad <marius.vlad@collabora.com>
-
- 19 2月, 2019 1 次提交
-
-
由 Rob Herring 提交于
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181205195050.4759-7-robh@kernel.orgSigned-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
-
- 24 1月, 2019 1 次提交
-
-
由 Daniel Vetter 提交于
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: NHarry Wentland <harry.wentland@amd.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: NJani Nikula <jani.nikula@intel.com> Acked-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: NCK Hu <ck.hu@mediatek.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLiviu Dudau <liviu.dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
-
- 05 11月, 2018 1 次提交
-
-
由 Fabio Estevam 提交于
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 05 10月, 2018 1 次提交
-
-
由 Arnd Bergmann 提交于
The variable is declared in an #ifdef section, but the user is now unconditional, which leads to a build failure: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'? Remove the remaining #ifdef as well. Fixes: f53705fd ("drm/imx: Use drm_fbdev_generic_setup()") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
-
- 27 9月, 2018 1 次提交
-
-
由 Arnd Bergmann 提交于
The variable is declared in an #ifdef section, but the user is now unconditional, which leads to a build failure: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'? Remove the remaining #ifdef as well. Fixes: f53705fd ("drm/imx: Use drm_fbdev_generic_setup()") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
-
- 25 9月, 2018 1 次提交
-
-
由 Noralf Trønnes 提交于
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. CONFIG_DRM_FBDEV_EMULATION wasn't honoured by the CMA helper, but it is by drm_fb_helper. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-12-noralf@tronnes.org
-
- 01 8月, 2018 1 次提交
-
-
由 Souptick Joarder 提交于
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). with this conversion, the remaining member of struct imx_drm_device, state, will be no more useful and it could be removed forever. Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Signed-off-by: NAjit Negi <ajitn.linux@gmail.com> [p.zabel@pengutronix.de: rebased onto drm-next, updated commit message] Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 17 7月, 2018 2 次提交
-
-
由 Leonard Crestez 提交于
This has been unused since commit 44b460cf ("drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcs") Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Thomas Zimmermann 提交于
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 19 12月, 2017 1 次提交
-
-
由 Lucas Stach 提交于
This adds FB modifier support for the Vivante single buffer tiled formats, when the PRG/PRE engines are present. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 08 12月, 2017 1 次提交
-
-
由 Noralf Trønnes 提交于
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-8-noralf@tronnes.org
-
- 30 11月, 2017 1 次提交
-
-
由 Lucas Stach 提交于
drm_atomic_helper_wait_for_vblanks will go away in the future. The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits have completed flipping before the commit_tail returns. This must be ensured by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do a less agressive wait, which is fine for imx-drm. Fixes: 080de2e5 (drm/atomic: Check for busy planes/connectors before setting the commit) Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 16 9月, 2017 1 次提交
-
-
由 Noralf Trønnes 提交于
drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now, use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-11-git-send-email-noralf@tronnes.org
-
- 29 7月, 2017 1 次提交
-
-
由 Noralf Trønnes 提交于
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-10-git-send-email-noralf@tronnes.org
-
- 13 7月, 2017 1 次提交
-
-
由 Maarten Lankhorst 提交于
for_each_obj_in_state is about to be removed, so use the new atomic iterator macros. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-13-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de> Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 31 5月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
It's only done in the driver load error path, where vblanks don't need to be quiescent anyway. And that's all drm_vblank_cleanup does, since the core will release the vblank allocations on its own already. So drop it. Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-24-daniel.vetter@ffwll.ch
-
- 04 4月, 2017 1 次提交
-
-
由 Lucas Stach 提交于
While it is possible to hook other CRTC implementations into imx-drm in practice there are none yet and the option to disable ipuv3-crtc support has been hidden for a long time. Now that the imx-drm-core has learned to deal with some of the specifics of IPUv3 there is a cyclic dependency between both parts. To get rid of this and to decimate the Kconfig maze a bit, simply merge both parts into one module. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 16 3月, 2017 2 次提交
-
-
由 Liu Ying 提交于
No one is using the structure imx_drm_component, so let's remove the definition to save several lines. Signed-off-by: NLiu Ying <gnuiyl@gmail.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Lucas Stach 提交于
Allow the planes to use the PRG/PRE units as linear prefetchers when possible. This improves DRAM efficiency a bit and reduces the chance for display underflow when the memory subsystem is under load. This does not yet support scanning out tiled buffers directly, as this needs more work, but it already wires up the basic interaction between imx-drm, the IPUv3 driver and the PRG and PRE drivers. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 15 3月, 2017 2 次提交
-
-
由 Philipp Zabel 提交于
The DP (display processor) channel disable code tried to busy wait for the DP sync flow end interrupt status bit when disabling the partial plane without a full modeset. That never worked reliably, and it was disabled completely by the recent "gpu: ipu-v3: remove IRQ dance on DC channel disable" patch, causing ipu_wait_interrupt to always time out after 50 ms, which in turn would trigger a timeout in drm_atomic_helper_wait_for_vblanks. This patch changes ipu_plane_atomic_disable to only queue a DP channel register update at the next frame boundary and set a flag, which can be done without any waiting whatsoever. The imx_drm_atomic_commit_tail then calls a new ipu_plane_disable_deferred function that does the actual IDMAC teardown of the planes that are flagged for deferred disabling, after waiting for the vblank. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
-
由 Philipp Zabel 提交于
drm_atomic_helper_cleanup_planes only calls the cleanup_fb plane helpers, which we don't implement as a CMA framebuffer based driver. There is no reason to wait for vblanks in commit_tail only to do nothing afterwards. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
-
- 14 3月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
-
- 17 2月, 2017 1 次提交
-
-
由 Philipp Zabel 提交于
There is no reason to limit framebuffer size to 64x64 pixels at a minimum on creation. The actual scanout limitations (width >= 13 for the base plane and height >= 2) are checked in atomic_check. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
-
- 12 2月, 2017 1 次提交
-
-
由 Laurent Pinchart 提交于
The drm_mode_config helper private field points to a structure of function pointers that don't need to be modified at runtime. Make it const. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: NBrian Starkey <brian.starkey@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170102091613.6310-1-laurent.pinchart@ideasonboard.com
-
- 09 2月, 2017 1 次提交
-
-
由 Shawn Guo 提交于
With the vblank hooks in struct drm_crtc_funcs, we do not need to maintain the CRTC specific vblank callbacks with struct imx_drm_crtc_helper_funcs any more. By moving the stuff that we currently do in imx_drm_add_crtc(), like of_node setting and drm_crtc_helper_add()/drm_crtc_init_with_planes() invoking, we can kill things like struct imx_drm_crtc, imx_drm_crtc_helper_funcs and related functions completely. Functions ipu_enable_vblank() and ipu_disable_vblank() are moved around without changes, only for saving the forward declarations. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-13-git-send-email-shawnguo@kernel.org
-
- 08 2月, 2017 1 次提交
-
-
由 Shawn Guo 提交于
Core code already makes drm_driver.get_vblank_counter hook optional by letting drm_vblank_no_hw_counter be the default implementation for the function hook. So the drm_vblank_no_hw_counter assignment in the driver code becomes redundant and can be removed now. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Acked-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NAlexey Brodkin <abrodkin@synopsys.com> Acked-by: NLiviu Dudau <liviu.dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org
-