- 03 10月, 2007 10 次提交
-
-
由 Paul Mackerras 提交于
Currently the prep_defconfig in arch/ppc won't build due to swsusp being broken. This patch avoids the problem by essentially disabling all power management on those platforms left in arch/ppc. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Linus made this suggestion for the x86 merge and this starts the process for powerpc. We assume that CONFIG_PPC64 implies CONFIG_PPC_MERGE and CONFIG_PPC_STD_MMU_32 implies CONFIG_PPC_STD_MMU. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Move out the old-style exception parsers to a separate function, and don't call it on platforms that have a platform-specific handler. It would make sense to move out the generic versions into their platforms instead, but that can be done gradually down the road. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Domen Puncer 提交于
This provides an implementation of the <linux/clk.h> interface for arch/powerpc using a set of function pointers in clk_functions. Platforms that want to support this interface should fill clk_functions and select CONFIG_PPC_CLOCK in Kconfig. Signed-off-by: NDomen Puncer <domen.puncer@telargo.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
In the MPIC U3 MSI code, we call u3msi_compose_msi_msg() once for each MSI. This is overkill, as the address is per pci device, not per MSI. So setup the address once, and just set the data per MSI. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Currently rtas_change_msi() returns either the error code from RTAS, or if the RTAS call succeeded the number of irqs that were configured by RTAS. This makes checking the return value more complicated than it needs to be. Instead, have rtas_change_msi() check that the number of irqs configured by RTAS is equal to what we requested - and return an error otherwise. This makes the return semantics match the usual 0 for success, something else for error. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
rtas_setup_msi_irqs() doesn't need to call teardown() itself, the generic code will do this for us as long as we return a non-zero value. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
u3msi_setup_msi_irqs() doesn't need to call teardown() itself, the generic code will do this for us as long as we return a non zero value. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
pci_device_to_OF_node() returns the device node attached to a PCI device, but doesn't actually grab a reference - we need to do it ourselves. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 10月, 2007 1 次提交
-
-
由 Linas Vepstas 提交于
It seems that some versions of firmware will report a device node status as the string "okay". As we are not expecting this string, the device node will be ignored by the EEH subsystem. Which means EEH will not be enabled. When EEH is not enabled, PCI errors will be converted into Machine Check exceptions, and we'll have a very unhappy system. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 9月, 2007 15 次提交
-
-
由 Emil Medve 提交于
These are the symptom error messages: CC arch/powerpc/kernel/setup_32.o In file included from include/linux/blkdev.h:17, from include/linux/ide.h:13, from arch/powerpc/kernel/setup_32.c:13: include/linux/bsg.h:67: warning: 'struct request_queue' declared inside parameter list include/linux/bsg.h:67: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/bsg.h:71: warning: 'struct request_queue' declared inside parameter list In file included from arch/powerpc/kernel/setup_32.c:13: include/linux/ide.h:857: error: field 'wrq' has incomplete type CC arch/powerpc/kernel/ppc_ksyms.o In file included from include/linux/blkdev.h:17, from include/linux/ide.h:13, from arch/powerpc/kernel/ppc_ksyms.c:15: include/linux/bsg.h:67: warning: 'struct request_queue' declared inside parameter list include/linux/bsg.h:67: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/bsg.h:71: warning: 'struct request_queue' declared inside parameter list In file included from arch/powerpc/kernel/ppc_ksyms.c:15: include/linux/ide.h:857: error: field 'wrq' has incomplete type The fix tries to use the smallest scope CONFIG_* symbols that will fix the build problem. In this case <linux/ide.h> needs to be included only if IDE=y or IDE=m were selected. Also, ppc_ide_md is needed only if BLK_DEV_IDE=y or BLK_DEV_IDE=m Moved the EXPORT_SYMBOL(ppc_ide_md) from ppc_ksysms.c next to its declaration in setup_32.c which made <linux/ide.h> not needed. With <linux/ide.h> gone from ppc_ksyms.c, <asm/cacheflush.h> is needed to address the following warnings and errors: CC arch/powerpc/kernel/ppc_ksyms.o arch/powerpc/kernel/ppc_ksyms.c:122: error: '__flush_icache_range' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:122: warning: type defaults to 'int' in declaration of '__flush_icache_range' arch/powerpc/kernel/ppc_ksyms.c:123: error: 'flush_dcache_range' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:123: warning: type defaults to 'int' in declaration of 'flush_dcache_range' Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Current kernels have a non-working platinumfb due to some resource management issues. This fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Satyam Sharma 提交于
> ------------[ cut here ]------------ > Badness at arch/powerpc/kernel/smp.c:202 comes when smp_call_function_map() has been called with irqs disabled, which is illegal. However, there is a special case, the panic() codepath, when we do not want to warn about this -- warning at that time is pointless anyway, and only serves to scroll away the *real* cause of the panic and distracts from the real bug. * So let's extract the WARN_ON() from smp_call_function_map() into all its callers -- smp_call_function() and smp_call_function_single() * Also, introduce another caller of smp_call_function_map(), namely __smp_call_function() (and make smp_call_function() a wrapper over this) which does *not* warn about disabled irqs * Use this __smp_call_function() from the panic codepath's smp_send_stop() We also end having to move code of smp_send_stop() below the definition of __smp_call_function(). Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Hook up affinity-setting for U3/U4 MSI interrupt sources. Tested on Quad G5 with myri10ge. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
Since the PPE on cell is an in-order core, it suffers significantly from wrong instruction scheduling. This adds a Kconfig option that enables passing -mtune=cell to gcc in order to generate object code that runs well on cell. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
The cast to u32 * isn't required, of_get_property returns a void *. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
Make the define_machine() block for mpc885_ads more greppable and consistent with other examples in tree. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
cuImage needs to know the logical index of the ethernet devices in order to assign mac addresses. This adds the needed properties. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> CC: Scott Wood <scottwood@freescale.com> CC: Kumar Gala <galak@kernel.crashing.org> CC: Timur Tabi <timur@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Meelis Roos 提交于
This patch fixes arch/ppc kernels, at least for prep subarch, after build-id addition. Without this, kernels were 3 times the size and bootloader refused to load them. Now they are back to normal again. Tested only with Roland McGrath's "Use LDFLAGS_MODULE only for .ko links" patch applied - boots and works fine. Signed-off-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Aristeu Rozanski 提交于
When a Fn key is used in combination with another key in ADB keyboards it will generate a Fn event and then a second event that can be a different key than pressed (Fn + F1 for instance can generate Fn + brightness down if it's configured like that). This enables the reporting of the Fn key to the input system. As Fn is a dead key for most purposes, it's useful to report it so applications can make use of it. One example is apple_mouse (https://jake.ruivo.org/uinputd/trunk/apple_mouse/) that emulates the second and third keys using a combination of keyboard keys and the mouse button. Other applications may use the KEY_FN as a modifier as well. I've been updating and using this patch for months without problems. Signed-off-by: NAristeu Rozanski <aris@ruivo.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mike Frysinger 提交于
Pretty much everyone uses "__attribute__" or "attribute", no one uses "__attribute". This tweaks the three places in asm-powerpc where this comes up. While only asm-powerpc/types.h is interesting (for userspace), I did asm-powerpc/processor.h as well for consistency. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Dale Farnsworth 提交于
Commit 69331af7, "Fixes and cleanups for earlyprintk aka boot console", resulted in printk output prior to the initialization of the mpsc console driver not being printed. That commit causes the mpsc's CON_PRINTBUFFER flag to be cleared since udbg should have printed the previous output. I guess we can no longer ignore udbg. :) This patch provides udbg_putc() and udbg_getc() functions for the Marvell mv64x60 chips. These functions are enabled if an mv64x60 port is to be used as the console as determined from the device tree. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Acked-by: NMark A. Greer <mgreer@mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
This adds the option for the pmac_zilog driver to use the major/minor numbers recently allocated specifically for it (/dev/ttyPZn) instead of the /dev/ttySn numbers. The advantage of doing this is that it allows the pmac_zilog and 8250 drivers to coexist. The disadvantage of doing this is that it is a user-visible ABI change and it will break existing working setups on powermacs, and could be confusing to users. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 20 9月, 2007 14 次提交
-
-
由 David Gibson 提交于
This patch includes a whole batch of smallish cleanups for drivers/mtd/physmap_of.c. - A bunch of uneeded #includes are removed - We switch to the modern linux/of.h etc. in place of asm/prom.h - Use some helper macros to avoid some ugly inline #ifdefs - A few lines of unreachable code are removed - A number of indentation / line-wrapping fixes - More consistent use of kernel idioms such as if (!p) instead of if (p == NULL) - Clarify some printk()s and other informative strings. - parse_obsolete_partitions() now returns 0 if no partition information is found, instead of returning -ENOENT which the caller had to handle specially. - (the big one) Despite the name, this driver really has nothing to do with drivers/mtd/physmap.c. The fact that the flash chips must be physically direct mapped is a constrant, but doesn't really say anything about the actual purpose of this driver, which is to instantiate MTD devices based on information from the device tree. Therefore the physmap name is replaced everywhere within the file with "of_flash". The file itself and the Kconfig option is not renamed for now (so that the diff is actually a diff). That can come later. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
According to PowerPC 440EPx documentation, MAL0 is comprised of four channels (two transmit and two receive). Each channel is dedicated to one of two EMAC cores. This patch fixes Sequoia DTS MAL0 entry and EMAC entries, assigning correct channel numbers to EMACs. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
According to PowerPC 440EP documentation, MAL0 consists of 6 channels (4 transmit channels and 2 receive channels) This patch fixes Bamboo DTS MAL0 "num-rx-chans" entry. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
The patch adds support for the 64-bit resources to the PCI iomap code. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Add myself as PowerPC 4xx maintainer and list the git tree Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm..com>
-
由 Hollis Blanchard 提交于
Implement udbg_getc() for 440, which fixes xmon input. Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
A new binding for flash devices was recently introduced. This updates the Sequoia DTS to use the new binding and enabled MTD in the defconfig. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Acked-by: NStefan Roese <sr@denx.de>
-
由 Josh Boyer 提交于
A new binding for flash devices was recently introduced. This updates the Walnut DTS to use the new binding. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Josh Boyer 提交于
The latest physmap_of driver has a small error where it will fail the probe with: physmap-flash: probe of fff00000.small-flas failed with error -2 if there are no partition subnodes in the device tree and the old style binding is not used. Since partition definitions are optional, the probe should still succeed. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Josh Boyer 提交于
Add a cuboot wrapper for the Bamboo board. Additionally, we enable MAC address fixups for both cuboot and treeboot. This also removes some obsoleted linker declarations that have been moved into ops.h Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Paul Mackerras 提交于
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] cpu-bugs64.c: GCC 3.3 constraint workaround [MIPS] DEC: Initialise ioasic_ssr_lock
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6173a): Documentation: Remove reference to dead "cpia_pp=" boot-time option Revert "V4L/DVB (6173a): Documentation: Remove reference to dead "cpia_pp=" boot-time option"
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Avoid replaying inode buffer initialisation log items if on-disk version is newer. [XFS] Ensure file size updates have been completed before writing inode to disk. [XFS] On-demand reaping of the MRU cache
-