- 29 5月, 2009 2 次提交
-
-
由 Jouni Hogander 提交于
Add common omap2/3 function to check wether there is irq pending. Switch to use it in omap2 pm code instead of its own. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 27 5月, 2009 1 次提交
-
-
由 Kevin Hilman 提交于
This reverts commit 5461af5a. Adding a disable hook to the irq_chip is not the way to fix the problem being addressed by this patch. Instead, we need to fix support for [enable|disable]_irq_wake(). Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 26 5月, 2009 9 次提交
-
-
由 Santosh Shilimkar 提交于
This patch removes unnecessary omap2_globals and pass the global structures directly as function argument. The proposed cleanup was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch removes fixes omap_sram_error() function and replace the error paths with BUG_ON. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch fixes the compiler warning "assignment from incompatible pointer type" in dmtimer.c and removes the tye casts. These warnings were suppressed by type catsing. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
We don't necessarily want to compile in irq.o and sdrc.o for omap4. Also, clock and prcm may not be implemented initially. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Processor specific macros should be used instead. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
It's currently unused, and processor specific defines should be used instead. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move define of OMAP2_VA_IC_BASE to be local to entry-macro.S Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Remove OMAP_PRM_REGADDR and use processor specific defines instead. Also fold in a patch from Kevin Hilman to add _OFFSET #defines for the PRCM registers to be used with the prm_[read|write]_* macros. These are used extensively in the forthcoming OMAP PM support. Also remove now unused OMAP2_PRM_BASE. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Use processor specific defines instead. As an extra bonus, this patch fixes the problem of CONFIG_DEBUG_SPINLOCK calling sched_clock before we have things initialized: http://patchwork.kernel.org/patch/15810/Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 19 5月, 2009 2 次提交
-
-
由 Rabin Vincent 提交于
Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 5月, 2009 3 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mel Gorman 提交于
pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Having discussed broadcast tick support with Thomas Glexiner, the broadcast tick devices should be registered with a higher rating than the global tick device, and it should have the ONESHOT and PERIODIC feature flags set. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NThomas Glexiner <tglx@linutronix.de>
-
- 17 5月, 2009 4 次提交
-
-
由 Russell King 提交于
smp_cross_call_done() is a no-op for MPCore, and since it's only used by platform code, there's no point in having it unless it's doing something. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ricardo Martins 提交于
Compilation for this board yields the following errors: arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function) Fix them by including the necessary header. Signed-off-by: NRicardo Martins <rasm@fe.up.pt> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hartley Sweeten 提交于
Fix the clkdev API support for the ep93xx uart clocks. The uarts available in the ep93xx have individual clock controls. The current implementation assumes that the bootloader has enabled the clocks before the kernel has booted. It also assumes that the bootloader has set the UARTBAUD bit indicating that the uarts are running off the 14.7456MHz external crystal. This fixes both issues. It also allows the uart clocks to be stopped when there are no users. Tested-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 5月, 2009 3 次提交
-
-
由 Tony Lindgren 提交于
This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak <imre.deak@nokia.com> Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kalle Jokiniemi 提交于
The OMAP3430ES2_SAVEANDRESTORE_SHIFT macro is used by powerdomain code in "1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT" manner, but the definition was also (1 << 4), meaning we actually modified bit 16. So the definition needs to be 4. This fixes also a cold reset HW bug in OMAP3430 ES3.x where some of the efuse bits are not isolated during wake-up from off mode. This can cause randomish cold resets with off mode. Enabling the USBTLL hardware SAVEANDRESTORE causes the core power up assert to be delayed in a way that we will not get faulty values when boot ROM is reading the unisolated registers. Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Acked-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vikram Pandita 提交于
As per 3430 TRM, there are 6 banks [0 to 191] Signed-off-by: NTom Rix <Tom.Rix@windriver.com> Signed-off-by: NVikram Pandita <vikram.pandita@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 15 5月, 2009 8 次提交
-
-
由 Ben Dooks 提交于
The s3c24xx_register_clock() function has been doing a test on clk->owner to see if it is NULL, and then setting itself as the owner if clk->owner == NULL. This is not needed, arch/arm/plat-s3c/clock.c cannot be compiled as a module, and even if it was, it should not be playing with this field if it being registered from somewhere else. The best course of action is to remove this bit of code completely. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The BAST support code is calling s3c_i2c0_set_platdata() from the map_io() entry, instead of the bast_init() code. This causes the registration to fail due to kmalloc() not being available at the time. This fixes the following error: s3c_i2c0_set_platdata: no memory for platform data Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Fix unused code warning in arch/arm/plat-s3c24xx/dma.c if there is no PM support enabled. The function to_dma_chan() should be marked inline so that the compiler will eliminate it without warning if it isn't used. arch/arm/plat-s3c24xx/dma.c:1239: warning: 'to_dma_chan' defined but not used Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Fix compilation bug when debug was enabled Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Cleanup arm/plat-s3c64xx/include/plat/gpio-bank-h.h include file. Using shift-left operation with value >32 is a bad habit. Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The symbol 'floatx80_is_nan' prototype was defined locally in fpa11_cprt.c when it was built outside the file in softfloat-specialisze. Move this into softfloat.h to fix the following sparse warning: softfloat-specialize:276:6: warning: symbol 'floatx80_is_nan' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add header file decleration for 'ExtendedCPDO' in fpa11.h to stop the following sparse warning: extended_cpdo.c:90:14: warning: symbol 'ExtendedCPDO' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 David Brownell 提交于
This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 5月, 2009 8 次提交
-
-
由 Paul Walmsley 提交于
Rename clk_init_one() to clk_preinit() to distinguish its function from clk_init() and the individual struct clk init functions. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Artem Bityutskiy 提交于
On our system we see the following messages: Disabling unused clock "gpt2_ick" Disabling unused clock "gpt3_ick" Disabling unused clock "gpt4_ick" Disabling unused clock "gpt5_ick" ... The messages have KERN_INFO level and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from. Let's give them debugging level instead. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com> [paul@pwsan.com: trimmed debugging output in patch description]
-
由 Paul Walmsley 提交于
The CORE DPLL M2 frequency change code should use pr_debug(), not pr_info(), for its debug messages. Same with omap2_clksel_round_rate_div(). While here, convert a few printk(KERN_ERR .. into pr_err(). Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
According to the 34xx TRM Rev. K section 11.2.4.4.11.1 "Purpose of the DLL/CDL Module," the SDRC delay-locked-loop can be locked at any SDRC clock frequency from 83MHz to 166MHz. CDP code unconditionally unlocked the DLL whenever shifting to a lower SDRC speed, but this seems unnecessary and error-prone, as the DLL is no longer able to compensate for process, voltage, and temperature variations. Instead, only unlock the DLL when the SDRC clock rate would be less than 83MHz. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Renumber registers in omap3_sram_configure_core_dpll() assembly code to make space for additional parameters. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Initialize SDRC_POWER to a known-good setting when the kernel boots. Necessary since some bootloaders don't initialize SDRC_POWER properly. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Clear the SDRC_POWER.PWRENA bit before putting the SDRAM into self-refresh mode. This prevents the SDRC from attempting to power off the SDRAM, which can cause the system to hang. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Where necessary, add interconnect barriers to force posted writes to complete before continuing. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-