Add all the necessary platform code to initialize the dwc3
USB host controller. This code initializes the clocks and
performs a reset on the USB core and PHYs. The driver code
in 'drivers/usb/dwc3' is where the real driver lives.
Signed-off-by: NSteven J. Hill <steven.hill@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15108/Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

With the IRQ stack changes integrated, the XRX200 devices started
emitting a constant stream of kernel messages like this:

[  565.415310] Spurious IRQ: CAUSE=0x1100c300

This is caused by IP0 getting handled by plat_irq_dispatch() rather than
its vectored interrupt handler, which is fixed by commit de856416e714
("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch").

Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly
by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ
for all MIPS CPU interrupts.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Acked-by: NJohn Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15077/
[james.hogan@imgtec.com: tweaked commit message]
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing
continuation lines") the output of counter synchornisation has been
split across lines:
[ 0.665181] Synchronize counters for CPU 1:
[ 0.678578] done.

Fix this by using pr_cont, and replace printk with pr_info.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15195/Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Commit dda45f70 ("MIPS: Switch to the irq_stack in interrupts")
changed both the normal and vectored interrupt handlers. Unfortunately
the vectored version, "except_vec_vi_handler", was incorrectly modified
to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to
the vectored handler that has been set up. This is ok for many platforms
which set the vectored handler to plat_irq_dispatch anyway, but will
cause problems with platforms that use other handlers.

Fixes: dda45f70 ("MIPS: Switch to the irq_stack in interrupts")
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15110/Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

The postlink Makefile must include include/config/auto.conf to get the
kernel configuration variables. But in a clean kernel directory this
file does not exist, causing make to bail with the error:

arch/mips/Makefile.postlink:10: include/config/auto.conf: No such file or directory
make[1]: *** No rule to make target 'include/config/auto.conf'.  Stop.
Makefile:1290: recipe for target 'vmlinuxclean' failed

Fix this by using "-include" to not cause a Make error when the file
does not exist.

Fixes: 44079d35 ("MIPS: Use Makefile.postlink to insert relocations into vmlinux")
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15136/Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

The recently added MIPS cacheinfo support used a macro populate_cache()
to populate the cacheinfo structures depending on which caches are
present. However the macro contains multiple statements without
enclosing them in a do {} while (0) loop, so the L2 and L3 cache
conditionals in populate_cache_leaves() only conditionalised the first
statement in the macro.

This overflows the buffer allocated by detect_cache_attributes(),
resulting in boot failures under QEMU where neither the L2 or L2 caches
are present.

Enclose the macro statements in a do {} while (0) block to keep the
whole macro inside the conditionals.

Fixes: ef462f3b ("MIPS: Add cacheinfo support")
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Justin Chen <justin.chen@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/15276/

When building for microMIPS we need to ensure that the assembler always
knows that there is code at the target of a branch or jump. Commit
7170bdc7 ("MIPS: Add return errors to protected cache ops")
introduced a fixup path to protected_cache(e)_op() which does not meet
this requirement. The fixup path jumps to the "2" label but the .section
pseudo-op immediately following it causes the label to be marked as
data. Linking then fails with:

  mips-img-linux-gnu-ld: arch/mips/mm/c-r4k.o: .fixup+0x0: Unsupported
  jump between ISA modes; consider recompiling with interlinking
  enabled.

Fix this by declaring that "2" labels code using the .insn directive.

Fixes: 7170bdc7 ("MIPS: Add return errors to protected cache ops")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NMaciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/15274/Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

MIPS dependencies for KVM

Miscellaneous MIPS architecture changes depended on by the MIPS KVM
changes in the KVM tree.

- Move pgd_alloc() out of header.
- Exports so KVM can access page table management and TLBEX functions.
- Add return errors to protected cache ops.

The protected cache ops contain no out of line fixup code to return an
error code in the event of a fault, with the cache op being skipped in
that case. For KVM however we'd like to detect this case as page
faulting will be disabled so it could happen during normal operation if
the GVA page tables were flushed, and need to be handled by the caller.

Add the out-of-line fixup code to load the error value -EFAULT into the
return variable, and adapt the protected cache line functions to pass
the error back to the caller.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Export to TLB exception code generating functions so that KVM can
construct a fast TLB refill handler for guest context without
reinventing the wheel quite so much.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Add include guards in asm/uasm.h to allow it to be safely used by a new
header asm/tlbex.h in the next patch to expose TLB exception building
functions for KVM to use.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

Export pmd_init(), invalid_pmd_table and tlbmiss_handler_setup_pgd to
GPL kernel modules so that MIPS KVM can use the inline page table
management functions and switch between page tables:

- pmd_init() will be used directly by KVM to initialise newly allocated
  pmd tables with invalid lower level table pointers.

- invalid_pmd_table is used by pud_present(), pud_none(), and
  pud_clear(), which KVM will use to test and clear pud entries.

- tlbmiss_handler_setup_pgd() will be called by KVM entry code to switch
  to the appropriate GVA page tables.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

pgd_alloc() references init_mm which is not exported to modules. In
order for KVM to be able to use pgd_alloc() to allocate GVA page tables,
move pgd_alloc() into a new pgtable.c file and export it to modules.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

The DMA controller channel and port configuration is changed by
selecting the port or channel in one register and then update the
configuration in other registers. This has to be done in an atomic
operation. Previously only the local interrupts were deactivated which
works for single CPU systems. If the system supports SMP a better
locking is needed, use spinlocks instead.
On more recent SoCs (at least xrx200 and later) there are two memory
regions to change the configuration, there we could use one area for
each CPU and do not have to synchronize between the CPUs and more.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14912/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Free memory mapping, if ath79_clocks_init_dt_ng is not successful.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Fixes: 3bdf1071 ("MIPS: ath79: update devicetree clock support for AR9132")
Cc: antonynpavlov@gmail.com
Cc: albeu@free.fr
Cc: hackpascal@gmail.com
Cc: sboyd@codeaurora.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14915/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little
endian peripherals.

Without this patch, big endian kernels fail to communicate with little
endian periperals, such as PCI devices, on QEMU and FPGA based
platforms.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support")
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15105/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

So far only Luxul XWR-1750 router was supported. This adds a set of
other Luxul devices based on BCM47XX. It's a standard support for LEDs
and buttons.
Signed-off-by: NDan Haab <dhaab@luxul.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15106/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Return an error code without storing it in an intermediate variable.

* Delete the local variable "result" which became unnecessary with
  this refactoring.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15073/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A local variable was set to an error code in one case before a concrete
error situation was detected. Thus move the corresponding assignment into
an if branch to indicate a software failure there.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15072/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Return a failure indication without storing it
  in an intermediate variable.

* Delete the local variable "error" which became unnecessary
  with this refactoring.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15071/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

gcc warns about nonstandard declarations:

arch/mips/sgi-ip32/ip32-irq.c:31:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
arch/mips/sgi-ip32/ip32-irq.c:36:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
arch/mips/sgi-ip27/ip27-klnuma.c: In function 'replicate_kernel_text':
arch/mips/sgi-ip27/ip27-klnuma.c:85:116: error: old-style function definition [-Werror=old-style-definition]

Moving 'inline' before the return type, and adding argument types
shuts up the warning here. This patch affects several platforms,
but all in a trivial way. I'm fixing up all instances I found in
any of the 'defconfig' builds.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15050/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

kernelci reports a failure of the ip28_defconfig build after upgrading its
gcc version:

arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store.  Stop.

The problem apparently is that the -mr10k-cache-barrier=store option is now
rejected for CPUs other than r10k. Explicitly including the CPU in the
check fixes this and is safe because both options were introduced in
gcc-4.4.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15049/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

gcc-6 reports a harmless build warning:

arch/mips/cavium-octeon/dma-octeon.c: In function 'octeon_dma_alloc_coherent':
arch/mips/cavium-octeon/dma-octeon.c:179:3: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]

We can fix this by rearranging the code slightly using the
IS_ENABLED() macro.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15048Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A new gcc warning shows up for this old code with gcc-6:

arch/mips/loongson64/common/dma-swiotlb.c: In function 'loongson_dma_alloc_coherent':
arch/mips/loongson64/common/dma-swiotlb.c:35:2: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]

The code can be easily restructured to look more readable
and avoid the warning at the same time.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15047/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

All pointers to these functions were removed, so now they produce
warnings:

arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function]

This removes the functions. If we need them again, the patch can be
reverted later.

Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15044/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

request_mem_region returns a NULL pointer on error, comparing it
against a number results in a warning:

arch/mips/ralink/of.c: In function 'plat_of_remap_node':
arch/mips/ralink/of.c:45:15: error: ordered comparison of pointer with integer zero [-Werror=extra]
arch/mips/ralink/irq.c: In function 'intc_of_init':
arch/mips/ralink/irq.c:167:15: error: ordered comparison of pointer with integer zero [-Werror=extra]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Tobias Wolf <dev-NTEO@vplace.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15045/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The functions were originally used for the module unload path,
but are not referenced any more and just cause warnings:

arch/mips/ralink/timer.c:104:13: error: 'rt_timer_disable' defined but not used [-Werror=unused-function]
arch/mips/ralink/timer.c:74:13: error: 'rt_timer_free' defined but not used [-Werror=unused-function]

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Fixes: 62ee73d2 ("MIPS: ralink: Make timer explicitly non-modular")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15041/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Hauke already fixed a couple of them, but one instance remains
that checks for a negative integer when it should check
for a NULL pointer:

arch/mips/lantiq/xway/sysctrl.c: In function 'ltq_soc_init':
arch/mips/lantiq/xway/sysctrl.c:473:19: error: ordered comparison of pointer with integer zero [-Werror=extra]

Fixes: 6e807852 ("MIPS: Lantiq: Fix check for return value of request_mem_region()")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15043/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We get a harmless warning about a duplicate initalizer for the
i2c board info structure:

arch/mips/alchemy/board-gpr.c:239:11: error: initialized field overwritten [-Werror=override-init]

As both initializers have the identical value, we can simply drop
the second one.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15046/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A clean mips64 build produces no output except for two lines:

  Checking missing-syscalls for N32
  Checking missing-syscalls for O32

On other architectures, there is no output at all, so let's do the
same here for the sake of build testing. The 'kecho' macro is used
to print the message on a normal build but skip it with 'make -s'.

Fixes: e48ce6b8 ("[MIPS] Simplify missing-syscalls for N32 and O32")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15040/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

vdso.h includes <spaces.h> implicitly after defining CONFIG_32BITS.
This defeats the override in mach-ip27/spaces.h, leading to
a build error that shows up in kernelci.org:

In file included from arch/mips/include/asm/mach-ip27/spaces.h:29:0,
                 from arch/mips/include/asm/page.h:12,
                 from arch/mips/vdso/vdso.h:26,
                 from arch/mips/vdso/gettimeofday.c:11:
arch/mips/include/asm/mach-generic/spaces.h:28:0: error: "CAC_BASE" redefined [-Werror]
 #define CAC_BASE  _AC(0x80000000, UL)

An earlier patch tried to make the second definition conditional,
but that patch had the #ifdef in the wrong place, and would lead
to another warning:

arch/mips/include/asm/io.h: In function 'phys_to_virt':
arch/mips/include/asm/io.h:138:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]

For all I can tell, there is no other reason than vdso32 to ever
include this file with CONFIG_32BITS set, and the vdso itself should
never refer to the base addresses as it is running in user space,
so adding an #ifdef here is safe.

Link: https://patchwork.kernel.org/patch/9418187/
Fixes: 3ffc17d8 ("MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15039/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

kernelci.org reports tons of build warnings for linux-next:

35	WARNING: "memcpy" [fs/fat/msdos.ko] has no CRC!
35	WARNING: "__copy_user" [fs/fat/fat.ko] has no CRC!
32	WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned.
32	WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned.
32	WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned.
32	WARNING: EXPORT symbol "__strncpy_from_user_nocheck_asm" [vmlinux] version generation failed, symbol will not be versioned.

The problem here is mainly the missing asm/asm-prototypes.h header file
that is supposed to include the prototypes for each symbol that is exported
from an assembler file.

A second problem is that the asm/uaccess.h header contains some but not
all the necessary declarations for the user access helpers.

Finally, the vdso build is broken once we add asm/asm-prototypes.h, so
we have to fix this at the same time by changing the vdso header. My
approach here is to just not look for exported symbols in the VDSO
assembler files, as the symbols cannot be exported anyway.

Fixes: 576a2f0c ("MIPS: Export memcpy & memset functions alongside their definitions")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15038/
Patchwork: https://patchwork.linux-mips.org/patch/15069/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in
kernelci.org:

arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH

This updates the defconfig to have the feature built-in.

Fixes: 086b91d0 ("scsi_dh: integrate into the core SCSI code")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15001/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
kernelci.org:

arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT

This updates the defconfig to have the feature built-in.

Fixes: 1aefc75b ("cpufreq: stats: Make the stats code non-modular")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15000/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
symbols instead of tristate, and kernelci.org reports a bunch of
warnings for this, like:

arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE

This changes all the MIPS defconfigs with these symbols to have them
built-in.

Fixes: 9b91c96c ("netfilter: conntrack: built-in support for UDPlite")
Fixes: c51d3901 ("netfilter: conntrack: built-in support for DCCP")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14999/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Adds SPI device nodes to BCM7xxx MIPS based SoCs.
Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14990/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

64-bit pre-r6 kernels output the following broken printk continuation
lines during boot:

Checking for the multiply/shift bug...
no.
Checking for the daddiu bug...
no.
Checking for the daddi bug...
no.

Fix the printk continuations in cpu-bugs64.c to use pr_cont to restore
the correct output:

Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Checking for the daddi bug... no.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14916/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Al Viro noticed that we were using two different methods to filter out
flags from KBUILD_CFLAGS.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>

ralink_soc sould be assigned to RT3883_SOC, replace incorrect
comparision with assignment.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Fixes: 418d29c8 ("MIPS: ralink: Unify SoC id handling")
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14903/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In systems with CM3 & higher, the L2 cache is inclusive of the L1
dcache. Indicate this such that cpu_has_inclusive_pcaches evaluates true
and we avoid some unnecessary cache ops during DMA cache maintenance.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14018/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>