When receiving HCI Command Status after HCI Create Physical Link
execute HCI Write Remote AMP Assoc command to AMP controller.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

When receiving A2MP Get AMP Assoc Response execute HCI Create Physical
Link to AMP controller. Define function which will run when receiving
HCI Command Status.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

When receiving A2MP Get AMP Assoc Request execute Read Local AMP Assoc
HCI command to AMP controller. If the AMP Assoc data is larger than it
can fit to HCI event only fragment is read. When all fragments are read
send A2MP Get AMP Assoc Response.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

When receiving A2MP Get Info Request execute Read Local AMP Info HCI
command to AMP controller with function to be executed upon receiving
command complete event. Function will handle A2MP Get Info Response.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch adds support for Secure Simple Pairing with devices that have
KeyboardOnly as their IO capability. Such devices will cause a passkey
notification on our side and optionally also keypress notifications.
Without this patch some keyboards cannot be paired using the mgmt
interface.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

MGMT_EV_DEVICE_DISCONNECTED will now expose the disconnection reason to
userland, distinguishing four possible values:

	0x00	Reason not known or unspecified
	0x01	Connection timeout
	0x02	Connection terminated by local host
	0x03	Connection terminated by remote host

Note that the local/remote distinction just determines which side
terminated the low-level connection, regardless of the disconnection of
the higher-level profiles.

This can sometimes be misleading and thus must be used with care. For
example, some hardware combinations would report a locally initiated
disconnection even if the user turned Bluetooth off in the remote side.
Signed-off-by: NMikel Astiz <mikel.astiz@bmw-carit.de>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Replace the status checks with the short form of the boolean expression.
Signed-off-by: NMikel Astiz <mikel.astiz@bmw-carit.de>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

When the name of the given entry is empty , the state needs to be
updated accordingly.

Cc: stable@vger.kernel.org
Signed-off-by: NRam Malovany <ramm@ti.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If the device was not found in a list of found devices names of which
are pending.This may happen in a case when HCI Remote Name Request
was sent as a part of incoming connection establishment procedure.
Hence there is no need to continue resolving a next name as it will
be done upon receiving another Remote Name Request Complete Event.
This will fix a kernel crash when trying to use this entry to resolve
the next name.

Cc: stable@vger.kernel.org
Signed-off-by: NRam Malovany <ramm@ti.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not
resolve the name.This will fix a kernel crash when trying to use NULL
pointer.

Cc: stable@vger.kernel.org
Signed-off-by: NRam Malovany <ramm@ti.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Some devices e.g. some Android based phones don't do SDP search before
pairing and cancel legacy pairing when ACL is disconnected.

PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT
is only received after remote user entered PIN.

In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT
(2 seconds) is being used to timeout ACL connection. This results in
problems with legacy pairing as remote user has only few seconds to
enter PIN before ACL is disconnected.

Increase disconnect timeout for incomming connection to
HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists.

To avoid keeping ACL alive for too long after SDP search set ACL
timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected.

2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8
    status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01
    Role: Slave
2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00
2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:72:D6:6A:3F mode 0
2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 5
2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 42 page 1
2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 42 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000
2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0'
2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 42
2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3
    status 0x13 handle 42
    Error: Remote User Terminated Connection
2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x13
    Reason: Remote User Terminated Connection

Cc: stable@vger.kernel.org
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Acked-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch moves the hci_conn check to begining of hci_le_conn_
complete_evt in order to improve code's readability and better
error handling.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch does a trivial code refactoring in hci_conn lookup in
hci_le_conn_complete_evt. It performs the hci_conn lookup at the
begining of the function since it is used by both flows (error
and success).
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch changes hci_cs_le_create_conn to perform hci_conn lookup
by state instead of bdaddr.

Since we can have only one LE connection in BT_CONNECT state, we can
perform LE hci_conn lookup by state. This way, we don't rely on
hci_sent_cmd_data helper to find the hci_conn object.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch does some code refactoring in hci_cs_le_create_conn
function. The hci_conn object is only needed in case of failure,
therefore hdev locking and hci_conn lookup were moved to
if-statement scope.

Also, the conn->state check was removed since we should always
close the connection if it fails.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch removes some unneeded code from hci_cs_le_create_conn.

If the hci_conn is not found, it means this LE connection attempt
was triggered by a thrid-party tool (e.g. hcitool). We should not
create this new hci_conn in LE Create Connection command status
event since it is already properly handled in LE Connection
Complete event.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

We need to check the 'Role' parameter from the LE Connection
Complete Event in order to properly set 'out' and 'link_mode'
fields from hci_conn structure.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces the unlock-and-return statements by the goto
statement.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch removes hdev locking in hci_user_passkey_request_evt
since it is not needed. mgmt_user_passkey_request simply calls
mgmt_event which does not require hdev locking at all.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_NO_FLUSH bit checking by the helper
macro lmp_no_flush_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_SNIFF_SUBR bit checking by the helper
macro lmp_sniffsubr_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_SNIFF bit checking by the helper macro
lmp_sniff_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_RSWITCH bit checking by the helper macro
lmp_rswitch_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_ESCO bit checking by the helper macro
lmp_esco_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_SIMPLE_PAIR bit checking by the helper
macro lmp_ssp_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces all LMP_LE bit checking by the helper macro
lmp_le_capable.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

To help debugging printed hex object use standard bluetooth
specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x;
print manufacturer id and handle in hex instead of int; print opcode
always in 0x%4.4x format; status in 0x%2.2x.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

With LE/SMP the completion of a security level elavation from medium to
high is indicated by a HCI Encryption Key Refresh Complete event. The
necessary behavior upon receiving this event is a mix of what's done for
auth_complete and encryption_change, which is also where most of the
event handling code has been copied from.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch changes way LE Connection Complete event with error status are
handled. BDADDR returned in such event packet do not need to be valid and
should not be used to search for existing hci_conn. Instead, any hci_conn
with BT_CONNECT state should be matched since there can be only one
pending LE outgoing connection at any time.

If not handled properly, appriopriate hci_conn will not be removed and
subsequent connection to given peer will try to reuse it without making
actual connection attempt.

2012-05-07 11:21:39.133378 < HCI Command: LE Create Connection (0x08|0x000d) plen 25
    bdaddr 00:22:D0:10:13:EE type 1
2012-05-07 11:21:39.138774 > HCI Event: Command Status (0x0f) plen 4
    LE Create Connection (0x08|0x000d) status 0x00 ncmd 1
2012-05-07 11:21:44.752854 < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0
2012-05-07 11:21:44.759475 > HCI Event: Command Complete (0x0e) plen 4
    LE Create Connection Cancel (0x08|0x000e) ncmd 1
2012-05-07 11:21:44.764479 > HCI Event: LE Meta Event (0x3e) plen 19
    LE Connection Complete
      status 0x02 handle 0, role master
      bdaddr 00:00:00:00:00:00 (Public)

[14898.739425] [6603] hci_connect: hci0 dst 00:22:D0:10:13:EE
[14898.739429] [6603] hci_conn_add: hci0 dst 00:22:D0:10:13:EE
[14898.739434] [6603] hci_conn_init_sysfs: conn ffff880079f03000
[14898.739440] [6603] hci_send_cmd: hci0 opcode 0x200d plen 25
[14898.739443] [6603] hci_send_cmd: skb len 28
[14898.739487] [6603] hci_chan_create: hci0 conn ffff880079f03000
...
[14938.860231] [55] hci_send_cmd: hci0 opcode 0x200e plen 0
...
[14938.876427] [55] hci_le_conn_complete_evt: hci0 status 2
[14938.876433] [55] hci_conn_add: hci0 dst 00:00:00:00:00:00
[14938.876439] [55] hci_conn_init_sysfs: conn ffff88007aeff800
[14938.876454] [55] hci_send_to_control: len 14
[14938.876470] [55] l2cap_connect_cfm: hcon ffff88007aeff800 bdaddr 00:00:00:00:00:00 status 2
[14938.876474] [55] hci_conn_del: hci0 conn ffff88007aeff800 handle 0
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Acked-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Make the check more user friendly.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Most of the include were unnecessary or already included by some other
header.
Replace module.h by export.h where possible.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This is some leftover from the last patches that fixed style. It is mostly
line over 80 characters fixes reported by checkpatch.pl.
checkpatch.pl is clean for these files now.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Only obvious cases were left as inline, mostly oneline functions.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Remove magic number with defined link key size.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Follow the net subsystem rules.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If encryption change fails we should disconnect with auth failure error
code.
Signed-off-by: NGustavo Padovan <gustavo@padovan.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The mgmt_device_found function expects to receive only the significant
part of the EIR data so it needs to be removed before calling the
function. This patch adds a new eir_get_length() helper function to
calculate the length of the significant part.
Signed-off-by: NVishal Agarwal <vishal.agarwal@stericsson.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The right bit for "Inquiry with RSSI" is 0x02 and not 0x04 (which means
"Read Remote Extended Features Complete").
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The mgmt_ev_device_connected signal must be sent before any event
indications happen for sockets associated with the connection. Otherwise
e.g. device authorization for the sockets will fail with ENOTCONN as
user space things that there is no baseband link.

This patch fixes the issue by ensuring that the device_connected event
if sent (if it hasn't been so already) as soon as the first ACL data
packet arrives from the remote device.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>