- 19 12月, 2013 23 次提交
-
-
由 Hannes Frederic Sowa 提交于
IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This new mode discards all incoming fragmentation-needed notifications as I guess was originally intended with this knob. To not break backward compatibility too much, I only added a special case for mode 2 in the receiving path. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
The other field in ipv4_config, log_martians, was converted to a per-interface setting, so we can just remove the whole structure. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e, ixgbevf, ixgbe and igb. Don provides an ixgbevf patch to add DCB configuration into the queue setup so that we won't have to allocate queues in a separate place when enabling DCB. Guenter Roeck provides 2 patches for ixgbe to simplify the code by attaching hwmon sysfs attributes to hwmon device instead of PCI device. Also fix an issues where the temperature sensor attribute index was being started with the value 0 and not 1 as per the hwmon API. Carolyn provides igb patches to fix queue allocation method to accommodate changes during runtime. This includes changing how the driver initializes MSIx and checks for MSIx configuration to make it easier to reconfigure the device when queue changes happen at runtime. Neerav and Shannon fixes i40e debugfs commands that dump hex information by using print_hex_dump(). Shannon provides several i40e fixes which include the prevention of null pointer exception in the dump descriptor by checking that rings were allocated before trying to reference them. Fixed up a couple of scanfs to accept various base numbers instead of silently requiring hex. Anjali fixes up i40e where the incorrect defines were being used for misc interrupts. Alan Cox provides a fix for i40e where we assume that the resulting buffer is zero terminated when we then re-use it. The sscanf is limited to 512 bytes but needs to be 511 to allow for a terminator. Stephen Hemminger fixes i40e by making local functions static and removes unused code (i40e_aq_add/remove_vlan() functions). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
We don't need to maintain our own singly linked list code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
We don't need to maintain our own singly linked list code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
So that we don't need to play with singly linked list, and since the code is not on hot path, we can use spinlock instead of rwlock. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It looks weird to store the lock out of the struct but still points to a static variable. Just move them into the struct. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
These information can be saved in tcf_exts, and this will simplify the code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Currently actions are chained by a singly linked list, therefore it is a bit hard to add and remove a specific entry. Convert it to struct list_head so that in the latter patch we can remove an action without finding its head. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is not used. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 17 次提交
-
-
由 Carolyn Wyborny 提交于
This patch changes how the driver initializes MSIx and checks for MSIx configuration. This change makes it easier to reconfigure the device when queue changes happen at runtime using ethtool's set_channels feature. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
When changing number of queues using ethtool's set_channels during runtime, a queue allocation could fail, which can leave the device in a down state. In order to preserve the usability of the device in this scenario, this patch changes the driver to allocate the number of queues only if they have not been allocated already. The first allocation is then done for the max number of queues, which is the default queues for this driver. With this change, queue quantity changes are not subject to queue allocation failures. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Guenter Roeck 提交于
Per hwmon ABI, temperature sensor attribute index starts with 1, not 0. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Reviewed-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Guenter Roeck 提交于
Simplify the code. Attach hwmon sysfs attributes to hwmon device instead of pci device. Avoid race conditions caused by attributes being created after hwmon device registration. Implicitly (through hwmon API) add mandatory 'name' sysfs attribute. Other cleanup: Instead of allocating memory for hwmon attributes, move attributes and all other hwmon related data into struct hwmon_buff and allocate the entire structure using devm_kzalloc. Check return value from calls to igb_add_hwmon_attr() one by one instead of logically combining them all together. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch takes the DCB config checks and adds them to the normal setting up of the queues. This way we won't have to allocation queues in a separate place for enabling DCB. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-By: Jack Morgan<jack.morgan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Stephen Hemminger 提交于
Make local functions static in the file they are used. Remove functions i40e_aq_add_vlan and i40e_aq_remove_vlan since they are not used anywhere by current code. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alan Cox 提交于
We assume that the resulting buffer is zero terminated when we then re-use it. The sscanf is limited to 512 bytes but needs to be 511 to allow for a terminator. One of a set of problems noted by Jackie Chang Signed-off-by: NAlan Cox <alan@linux.intel.com> Acked-by: NShannon Nelson <Shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Version updated to 0.3.14-k Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
No functional change, but the wrong defines were being used. Change-Id: Ica2afd2dfe18154ca0f1260a508f31e372319ba7 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Take advantage of print_hex_dump() in another couple places to clean up the code. Change-Id: Ib618e75f928308c0afd0d8d74105da0c6577a024 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Fix up a couple of scanfs to accept various base numbers instead of silently requiring hex. Change-Id: I1cc4dffbb1d011bf603cbf34a8db093da57fad7a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
debugfs fixes: We don't really need to give usage messages for data errors, only for invalid command errors. Change-Id: If3f74ac49e43c3ced7fd388323fa738ac145e055 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Check that rings were allocated before trying to reference them. Change-Id: I33151e55ab7a7a305fecdb88ccb2709ac246b7c7 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: phy: fix checkpatch errors This patchset fixes trivial checkpatch errors, no functional change introduced. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
checkpatch spotted two errors, fix them. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
checkpatch spotted a few checkpatch errors such as whitespace damages and switch/case labels not being on the same column, fix them. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
checkpatch spotted a few spaces vs tabs errors, fix them. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-