Use devm_platform_ioremap_resource_byname() to simplify the code
since it contains platform_get_resource_byname() and
devm_ioremap_resource() respectively.

Link: https://lore.kernel.org/r/20200708164013.5076-1-zhengdejin5@gmail.comSigned-off-by: NDejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: NRob Herring <robh@kernel.org>

AM654 PCIe EP controller has MSI-X capability register and has the
ability to raise MSI-X interrupt. Add support in pci-keystone.c
for PCIe endpoint controller in AM654 to raise MSI-X interrupts.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Fix error handling when "num-viewport" DT property is not populated.

Fixes: 23284ad6 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+

The Keystone outbound Address Translation Unit (ATU) maps PCI MMIO space in
8 MB windows.  When programming the ATU windows, we previously incremented
the starting address by 8, not 8 MB, so all the windows were mapped to the
first 8 MB.  Therefore, only 8 MB of MMIO space was accessible.

Update the loop so it increments the starting address by 8 MB, not 8, so
more MMIO space is accessible.

Fixes: e75043ad ("PCI: keystone: Cleanup outbound window configuration")
Link: https://lore.kernel.org/r/20191004154811.GA31397@monakov-y.office.kontur-niirs.ruSigned-off-by: NYurii Monakov <monakov.y@gmail.com>
[bhelgaas: commit log]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NAndrew Murray <andrew.murray@arm.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>
Cc: stable@vger.kernel.org	# v4.20+

ks_pcie_stop_link() function does not clear LTSSM_EN_VAL bit so
link training was not triggered more than once after startup.
In configurations where link can be unstable during early boot,
for example, under low temperature, it will never be established.

Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver")
Signed-off-by: NYurii Monakov <monakov.y@gmail.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NAndrew Murray <andrew.murray@arm.com>
Cc: stable@vger.kernel.org

Add PCIe EP support for AM654x Platforms in pci-keystone.c

Link: https://lore.kernel.org/linux-pci/20190325093947.32633-15-kishon@ti.com/Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: made dev_vdbg() call a comment]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

PCIe in TI's AM654 devices is by default configured to work in GEN3 mode.

However PCIe does not work reliably in GEN3 mode because of SERDES
configuration.

Add support to set the link speed to GEN1, GEN2 or GEN3 based on
"max-link-speed" DT property with GEN2 as the default speed if
"max-link-speed" is absent.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

SERDES connected to the PCIe controller in AM654 requires
power on reset enable (POR_EN) to be set in the SERDES. The
SERDES driver sets POR_EN in the reset ops and it has to be
invoked before init or enable ops. In order for SERDES driver
to set POR_EN, invoke the phy_reset() API in pci-keystone driver.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Add PCIe RC support for AM654x Platforms in pci-keystone.c
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

hook_fault_code() is an ARM32 specific API for hooking into data abort.

AM65X platforms (that integrate ARM v8 cores and select CONFIG_ARM64 as
arch) rely on pci-keystone.c but on them the enumeration of a
non-present BDF does not trigger a bus error, so the fixup exception
provided by calling hook_fault_code() is not needed and can be guarded
with CONFIG_ARM.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Explicitly set the PCIe mode to BOOTCFG_DEVCFG instead of always
relying on the default values. This is required when EP mode has to
be explicitly written to BOOTCFG_DEVCFG register.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Move platform_get_resource() calls for resources that are applicable to
both host and endpoint mode (ie "dbics" and "app") from
ks_add_pcie_port() to the probe() callback, in preparation for adding
endpoint support to pci-keystone driver.

No functional change intended.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use platform_get_resource_byname() instead of platform_get_resource()
which uses an index to get memory resources. While at that get the memory
resource defined specifically for configuration space instead of
deriving the configuration space address from dbics address space.

Since the pci-keystone driver has never worked in the mainline kernel,
DT backward compatibility is not an issue.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Instead of having two functions
ks_pcie_add_pcie_port() and ks_pcie_dw_host_init() for initializing
host, have a single function to perform all the host initialization.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

pci-keystone driver uses irq_of_parse_and_map() to get irq number of
error_irq.

Use platform_get_irq() instead and move platform_get_irq() and
request_irq() of error_irq from ks_pcie_add_pcie_port to ks_pcie_probe
since error_irq is common to both RC mode and EP mode.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Add start_link()/stop_link() dw_pcie_ops and invoke ks_pcie_start_link()
directly from host_init. start_link()/stop_link() ops are required for
adding EP mode support.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use Keystone specific msi_irq_chip to configure the MSI controller
logic in the PCIe keystone wrapper instead of using the default
Designware msi_irq chip (dw_pci_msi_bottom_irq_chip) with
callback functions for configuring the Keystone MSI controller.
This will help to remove Keystone specific callback functions
added in dw_pcie_host_ops.

Move the default msi_irq_chip assignment to dw_pcie_host_init since
platforms that doesn't use the default msi_irq_chip will assign
msi_irq_chip in the msi_host_init() callback.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_msi_irq_handler() invokes ks_pcie_handle_msi_irq() for handling
the interrupts.

Having two functions for handling the interrupt was used when keystone
PCIe driver was implemented using two files but with commit b492aca3
("PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c"), which
merged the keystone PCIe driver to use a single file, two functions for
handling the interrupt handler are not required.

Handle MSI interrupt in a single interrupt handler here.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_msi_irq_handler() uses 'virq' to get the IRQ number offset.
This offset is used to get the correct MSI_IRQ_STATUS register
corresponding to the IRQ line that raised the interrupt.

There is no guarantee that 'virq' assigned for consecutive hardware
IRQ will be contiguous and this might get us an incorrect IRQ number
offset.

Fix it here by using 'hwirq' to get the IRQ number offset. Since we
don't store the 'virq' numbers of all the IRQ numbers, stop checking
if irq count is greater than MAX_MSI_HOST_IRQS and remove
MAX_MSI_HOST_IRQS.

Link: https://lkml.kernel.org/r/bb081d21-7c03-0357-4294-7e92d95d838c@arm.comSigned-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_get_irq_controller_info() is used to configure both MSI and
legacy interrupt. This will prevent MSI or legacy interrupt specific
intializations. Add separate functions to configure MSI and legacy
interrupts.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Change both MSI interrupt and legacy interrupt
related macros to take an additional argument in order to return the
correct register offset.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Cleanup macros defined in pci-keystone.c
by removing unused macros, grouping the macros and aligning
it properly.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Reorder header file in alphabetical order.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

commit 025dd3da ("PCI: keystone: Add error IRQ
handler") added dev_err() message only for ERR_AXI and ERR_FATAL. Add
debug error message for ERR_SYS, ERR_NONFATAL, ERR_CORR and ERR_AER here.

While at that avoid using ERR_IRQ_STATUS_RAW and use ERR_IRQ_STATUS
instead.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt
status. ERR_IRQ_STATUS_RAW has the status of the interrupts
before masking whereas ERR_IRQ_STATUS has the status of the interrupts
after masking. Since all the interrupts are unmasked here, use
ERR_IRQ_STATUS.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

ks_pcie_link_up() uses registers from the designware core to get the
status of the link. Move the register defines to pcie-designware.h
and cleanup ks_pcie_link_up().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Use BIT() macro for DBI_CS2 and cleanup
set_dbi_mode() and get_dbi_mode().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Outbound translation window is configured in order to access the
PCIe card's MEM space. Cleanup outbound translation configuration
here by using BIT() macros, adding a macro for window size and
using lower_32_bits/upper_32_bits macros for configuring the 64 bit
offset in the outbound translation region.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Instead of having a fixed outbound window count, get the number of
outbound windows from the device tree.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Cleanup configuration space access by removing ks_pcie_cfg_setup()
which has an unncessary check of "if (bus == 0)" which will never be the
case of *_other_conf() and adding macros for configuring the CFG_SETUP
register required for accessing the configuration space of the device.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Invoke runtime PM APIs to enable clocks and remove explicit
clock enabling using clk_prepare_enable().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Cleanup PHY handling by using devm_phy_optional_get() to get PHYs if
the PHYs are optional, creating a device link between the PHY device
and the controller device and disable PHY on error cases here.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource() to get control module registers.
Fix it here by using syscon APIs to get device id from control module.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Some function names begin with ks_dw_pcie_*
and some function names begin with ks_pcie_*. Modify it so that
all function names begin with ks_pcie_*.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Remove redundant platform_set_drvdata() invocation
in ks_pcie_probe().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Having two different files for keystone PCI driver
doesn't serve any purpose. Merge pci-keystone-dw.c and pci-keystone.c
into a single pci-keystone.c file and remove pci-keystone.h.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Remove unused "msi_intc_np" argument from
ks_dw_pcie_host_init().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

commit 886bc5ce ("PCI: designware: Add generic
dw_pcie_wait_for_link()") while adding a generic dw_pcie_wait_for_link()
performed a special handling (initiate link training multiple times) for
keystone which is not required. This also resulted in unncessarily waiting
for more time to establish the link even when no PCI device is connected.

Remove it and make it look similar to other dwc based PCIe drivers.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

No functional change. Move dw_pcie_setup_rc() out of
ks_pcie_establish_link() so that ks_pcie_establish_linki() can be used only
to start the link.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Reuse the already existing quirk to set MRRS for PCI host bridge
instead of explicitly setting MRRS in ks_pcie_host_init().
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>