Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups on top of the previously merged
  power management material for 5.1-rc1 with one cpupower utility update
  that wasn't pushed earlier due to unfortunate timing.

  Specifics:

   - Fix registration of new cpuidle governors partially broken during
     the 5.0 development cycle by mistake (Rafael Wysocki).

   - Avoid integer overflows in the menu cpuidle governor by making it
     discard the overflowing data points upfront (Rafael Wysocki).

   - Fix minor mistake in the recent update of the iowait boost
     computation in the intel_pstate driver (Rafael Wysocki).

   - Drop incorrect __init annotation from one function in the pxa2xx
     cpufreq driver (Arnd Bergmann).

   - Fix the operating performance points (OPP) framework initialization
     for devices in multiple power domains if only one of them is
     scalable (Rajendra Nayak).

   - Fix mistake in dev_pm_opp_set_rate() which causes it to skip
     updating the performance state if the new frequency is the same as
     the old one (Viresh Kumar).

   - Rework the cancellation of wakeup source timers to avoid potential
     issues with it and do some cleanups unlocked by that change (Viresh
     Kumar, Rafael Wysocki).

   - Clean up the code computing the active/suspended time of devices in
     the PM-runtime framework after recent changes (Ulf Hansson).

   - Make the power management infrastructure code use pr_fmt()
     consistently (Joe Perches).

   - Clean up the generic power domains (genpd) framework somewhat
     (Aisheng Dong).

   - Improve kerneldoc comments for two functions in the cpufreq core
     (Rafael Wysocki).

   - Fix typo in a PM QoS file description comment (Aisheng Dong).

   - Update the handling of CPU boost frequencies in the cpupower
     utility (Abhishek Goel)"

* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: governor: Add new governors to cpuidle_governors again
  cpufreq: intel_pstate: Fix up iowait_boost computation
  PM / OPP: Update performance state when freq == old_freq
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor
  OPP: Fix handling of multiple power domains
  PM / QoS: Fix typo in file description
  cpufreq: pxa2xx: remove incorrect __init annotation
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time
  PM: Add and use pr_fmt()
  cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
  cpuidle: menu: Avoid overflows when computing variance
  tools/power/cpupower: Display boost frequency separately

Pull Microblaze update from Michal Simek:
 "Simplify debugfs initialization"

* tag 'microblaze-v5.1-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: no need to check return value of debugfs_create functions

Pull networking fixes from David Miller:
 "More fixes in the queue:

  1) Netfilter nat can erroneously register the device notifier twice,
     fix from Florian Westphal.

  2) Use after free in nf_tables, from Pablo Neira Ayuso.

  3) Parallel update of steering rule fix in mlx5 river, from Eli
     Britstein.

  4) RX processing panic in lan743x, fix from Bryan Whitehead.

  5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.

  6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.

  7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
     modes, from Bryan Whitehead.

  8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  pptp: dst_release sk_dst_cache in pptp_sock_destruct
  MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
  l2tp: fix infoleak in l2tp_ip6_recvmsg()
  net/tls: Inform user space about send buffer availability
  net_sched: return correct value for *notify* functions
  lan743x: Fix TX Stall Issue
  net/mlx4_core: Fix qp mtt size calculation
  net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
  net/mlx4_core: Fix reset flow when in command polling mode
  mlxsw: minimal: Initialize base_mac
  mlxsw: core: Prevent duplication during QSFP module initialization
  net: dwmac-sun8i: fix a missing check of of_get_phy_mode
  net: sh_eth: fix a missing check of of_get_phy_mode
  net: 8390: fix potential NULL pointer dereferences
  net: fujitsu: fix a potential NULL pointer dereference
  net: qlogic: fix a potential NULL pointer dereference
  isdn: hfcpci: fix potential NULL pointer dereference
  Documentation: devicetree: add a new optional property for port mac address
  net: rocker: fix a potential NULL pointer dereference
  net: qlge: fix a potential NULL pointer dereference
  ...

Pull dmaengine updates from Vinod Koul:

 - dmatest updates for modularizing common struct and code

 - remove SG support for VDMA xilinx IP and updates to driver

 - Update to dw driver to support Intel iDMA controllers multi-block
   support

 - tegra updates for proper reporting of residue

 - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4

 - struct_size() usage and useless LIST_HEAD cleanups in subsystem.

 - qDMA controller driver for Layerscape SoCs

 - stm32-dma PM Runtime support

 - And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
   bcm2835, qcom_hidma etc

* tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits)
  dmaengine: imx-sdma: fix consistent dma test failures
  dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
  dmaengine: imx-sdma: add clock ratio 1:1 check
  dmaengine: dmatest: move test data alloc & free into functions
  dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()
  dmaengine: dmatest: wrap src & dst data into a struct
  dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
  dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
  dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
  dmaengine: ioatdma: Add Snow Ridge ioatdma device id
  dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dmaengine: mv_xor: Use correct device for DMA API
  Documentation :dmaengine: clarify DMA desc. pointer after submission
  Documentation: dmaengine: fix dmatest.rst warning
  dmaengine: k3dma: Add support for dma-channel-mask
  dmaengine: k3dma: Delete axi_config
  dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
  Documentation: bindings: dma: Add binding for dma-channel-mask
  Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This contains the last patches in Loic's remoteproc resource table
  handling changes, a number of updates to documentation, support for
  invoking the crash handler (for testing purposes), a fix for the
  handling of virtio devices during recovery, performance state votes in
  Qualcomm modem driver, support for specifying board specific firmware
  path for Qualcomm modem driver and improved support for graceful
  shutdown of Qualcomm remoteprocs"

* tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits)
  remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag"
  remoteproc: fix rproc_check_carveout_da() returned error and comments
  remoteproc: fix trace buffer va initialization
  remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain
  remoteproc: add warning on resource table cast
  remoteproc: fix rproc_alloc_carveout() bad variable cast
  remoteproc: fix rproc_da_to_va in case of unallocated carveout
  remoteproc: correct rproc_mem_entry_init() comments
  remoteproc: fix recovery procedure
  rpmsg: virtio: change header file sort style
  rpmsg: virtio: allocate buffer from parent
  remoteproc: st: add reserved memory support
  remoteproc: create vdev subdevice with specific dma memory pool
  remoteproc: q6v5_adsp: Remove voting for lpass_aon clock
  dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list
  remoteproc: q6v5-mss: Active powerdomain for SDM845
  remoteproc: q6v5-mss: Vote for rpmh power domains
  remoteproc: qcom: Add support for parsing fw dt bindings
  remoteproc: qcom_q6v5: don't auto boot remote processor
  remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown
  ...

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...

* pm-opp:
  PM / OPP: Update performance state when freq == old_freq
  OPP: Fix handling of multiple power domains

* pm-tools:
  tools/power/cpupower: Display boost frequency separately

* pm-domains:
  PM / domains: Remove one unnecessary blank line
  PM / Domains: Return early for all errors in _genpd_power_off()
  PM / Domains: Improve warn for multiple states but no governor

* pm-cpuidle:
  cpuidle: governor: Add new governors to cpuidle_governors again
  cpuidle: menu: Avoid overflows when computing variance

* pm-cpufreq:
  cpufreq: intel_pstate: Fix up iowait_boost computation
  cpufreq: pxa2xx: remove incorrect __init annotation
  cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()

* pm-core:
  PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
  PM-runtime: Consolidate code to get active/suspended time

* pm-sleep:
  PM / wakeup: Drop wakeup_source_drop()
  PM / wakeup: Rework wakeup source timer cancellation

* pm-qos:
  PM / QoS: Fix typo in file description

sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect,
so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct,
otherwise, the dst refcnt will leak.

It can be reproduced by this syz log:

  r1 = socket$pptp(0x18, 0x1, 0x2)
  bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e)
  connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e)

Consecutive dmesg warnings will occur:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

v1->v2:
  - use rcu_dereference_protected() instead of rcu_dereference_check(),
    as suggested by Eric.

Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Reported-by: NXiumei Mu <xmu@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a patchwork instance behind bcm-kernel-feedback-list that is
helpful to track submissions, add this list for the Broadcom GENET and
SYSTEMPORT drivers.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Back in 2013 Hannes took care of most of such leaks in commit
bceaa902 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")

But the bug in l2tp_ip6_recvmsg() has not been fixed.

syzbot report :

BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694
 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
 copy_to_user include/linux/uaccess.h:174 [inline]
 move_addr_to_user+0x311/0x570 net/socket.c:227
 ___sys_recvmsg+0xb65/0x1310 net/socket.c:2283
 do_recvmmsg+0x646/0x10c0 net/socket.c:2390
 __sys_recvmmsg net/socket.c:2469 [inline]
 __do_sys_recvmmsg net/socket.c:2492 [inline]
 __se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485
 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x445819
Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819
RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c
R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf

Local variable description: ----addr@___sys_recvmsg
Variable was created at:
 ___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
 do_recvmmsg+0x646/0x10c0 net/socket.c:2390

Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at ffff8880ae62fbb0
Data copied to user address 0000000020000000

Fixes: a32e0eec ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A previous fix ("tls: Fix write space handling") assumed that
user space application gets informed about the socket send buffer
availability when tls_push_sg() gets called. Inside tls_push_sg(), in
case do_tcp_sendpages() returns 0, the function returns without calling
ctx->sk_write_space. Further, the new function tls_sw_write_space()
did not invoke ctx->sk_write_space. This leads to situation that user
space application encounters a lockup always waiting for socket send
buffer to become available.

Rather than call ctx->sk_write_space from tls_push_sg(), it should be
called from tls_write_space. So whenever tcp stack invokes
sk->sk_write_space after freeing socket send buffer, we always declare
the same to user space by the way of invoking ctx->sk_write_space.

Fixes: 7463d3a2 ("tls: Fix write space handling")
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Reviewed-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is confusing to directly use return value of netlink_send()/
netlink_unicast() as the return value of *notify*, as it may be not
error at all.

Example: in tc_del_tfilter(), after calling tfilter_del_notify(), it will
goto errout if (err). However, the netlink_send()/netlink_unicast() will
return positive value even for successful case. So it may not call
tcf_chain_tp_remove() and so on to clean up the resource, as a result,
resource is leaked.

It may be easier to only check the return value of tfilter_del_nofiy(),
but it is more clean to correct all related functions.
Co-developed-by: NZengmo Gao <gaozengmo@jd.com>
Signed-off-by: NZhike Wang <wangzhike@jd.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It has been observed that tx queue may stall while downloading
from certain web sites (example www.speedtest.net)

The cause has been tracked down to a corner case where
the tx interrupt vector was disabled automatically, but
was not re enabled later.

The lan743x has two mechanisms to enable/disable individual
interrupts. Interrupts can be enabled/disabled by individual
source, and they can also be enabled/disabled by individual
vector which has been mapped to the source. Both must be
enabled for interrupts to work properly.

The TX code path, primarily uses the interrupt enable/disable of
the TX source bit, while leaving the vector enabled all the time.

However, while investigating this issue it was noticed that
the driver requested the use of the vector auto clear feature.

The test above revealed a case where the vector enable was
cleared unintentionally.

This patch fixes the issue by deleting the lines that request
the vector auto clear feature to be used.

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: NBryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull selinux fixes from Paul Moore:
 "Two small fixes for SELinux in v5.1: one adds a buffer length check to
  the SELinux SCTP code, the other ensures that the SELinux labeling for
  a NFS mount is not disabled if the filesystem is mounted twice"

* tag 'selinux-pr-20190312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock
  selinux: add the missing walk_size + len check in selinux_sctp_bind_connect

Merge tag 'apparmor-pr-2019-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor fixes from John Johansen:

 - fix double when failing to unpack secmark rules in policy

 - fix leak of dentry when profile is removed

* tag 'apparmor-pr-2019-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix double free when unpack of secmark rules fails
  apparmor: delete the dentry in aafs_remove() to avoid a leak
  apparmor: Fix warning about unused function apparmor_ipv6_postroute

Pull Kconfig updates from Masahiro Yamada:

 - rename lexer and parse files

 - fix 'Save as' menu of xconfig

* tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix 'Save As' menu of xconfig
  kconfig: rename zconf.y to parser.y
  kconfig: rename zconf.l to lexer.l

Merge tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes for this cycle are across the board.

  The bulk of it is cleanups, but there's also new device support in
  some drivers as well as more conversions to the atomic API"

* tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
  pwm: atmel: Remove useless symbolic definitions
  pwm: bcm-kona: Update macros to remove braces around numbers
  pwm: imx27: Only enable the clocks once in .get_state()
  pwm: rcar: Improve calculation of divider
  pwm: rcar: Remove legacy APIs
  pwm: rcar: Use "atomic" API on rcar_pwm_resume()
  pwm: rcar: Add support "atomic" API
  pwm: atmel: Add support for SAM9X60's PWM controller
  pwm: atmel: Add PWM binding for SAM9X60
  pwm: atmel: Rename objects of type atmel_pwm_data
  pwm: atmel: Add support for controllers with 32 bit counters
  pwm: atmel: Add struct atmel_pwm_data
  pwm: Add MediaTek MT8183 display PWM driver support
  pwm: hibvt: Add hi3559v100 support
  dt-bindings: pwm: hibvt: Add hi3559v100 support
  pwm: hibvt: Use individual struct per of-data
  pwm: imx: Signedness bug in imx_pwm_get_state()
  pwm: imx: Split into two drivers
  pwm: imx: Don't print an error on -EPROBE_DEFER
  pwm: imx: Set driver data earlier simplifying the end of ->probe()
  ...

Pull mailbox updates from Jassi Brar:

 - mailbox-test: support multiple controller instances

 - misc cleanup: IMX, STM32 and Tegra

 - new driver: ZynqMP IPI

* tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: keep MU irq working during suspend/resume
  dt-bindings: mailbox: Add Xilinx IPI Mailbox
  mailbox: ZynqMP IPI mailbox controller
  mailbox: stm32-ipcc: remove useless device_init_wakeup call
  mailbox: stm32-ipcc: do not enable wakeup source by default
  mailbox: mailbox-test: fix null pointer if no mmio
  mailbox: mailbox-test: fix debugfs in multi-instances
  mailbox: tegra-hsp: mark suspend function as __maybe_unused

Pull crypto fixes from Herbert Xu:
 "This fixes a bug in the newly added Exynos5433 AES code as well as an
  old one in the caam driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - add missing put_device() call
  crypto: s5p-sss - fix AES support for Exynos5433

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has been in -next since before the merge window
  opened, with no known collisions / issues reported.

  The only detail worth noting, outside the summary below, is that the
  "libnvdimm-start-pad" topic has been truncated to just cleanups and
  small fixes. The full topic branch would have doubled down on hacks
  around the "section alignment" limitation of the core-mm, instead
  effort is now being spent to address that root issue in the memory
  hotplug implementation for v5.2.

   - Fix nfit-bus command submission regression

   - Support retrieval of short-ARS results if the ARS state is
     "requires continuation", and even if the "no_init_ars" module
     parameter is specified

   - Allow busy-polling of the kernel ARS state by allowing root to
     reset the exponential back-off timer

   - Filter potentially stale ARS results by tracking query-ARS relative
     to the previous start-ARS

   - Enhance dax_device alignment checks

   - Add support for the Hyper-V family of device-specific-methods
     (DSMs)

   - Add several fixes and workarounds for Hyper-V compatibility

   - Fix support to cache the dirty-shutdown-count at init"

* tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits)
  libnvdimm/namespace: Clean up holder_class_store()
  libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings
  acpi/nfit: Update NFIT flags error message
  libnvdimm/btt: Fix LBA masking during 'free list' population
  libnvdimm/btt: Remove unnecessary code in btt_freelist_init
  libnvdimm/pfn: Remove dax_label_reserve
  dax: Check the end of the block-device capacity with dax_direct_access()
  nfit/ars: Avoid stale ARS results
  nfit/ars: Allow root to busy-poll the ARS state machine
  nfit/ars: Introduce scrub_flags
  nfit/ars: Remove ars_start_flags
  nfit/ars: Attempt short-ARS even in the no_init_ars case
  nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot
  acpi/nfit: Require opt-in for read-only label configurations
  libnvdimm/pmem: Honor force_raw for legacy pmem regions
  libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init()
  libnvdimm: Fix altmap reservation size calculation
  libnvdimm, pfn: Fix over-trim in trim_pfn_device()
  acpi/nfit: Fix bus command validation
  libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family
  ...

Pull filesystem-dax updates from Dan Williams:

 - Fix handling of PMD-sized entries in the Xarray that lead to a crash
   scenario

 - Miscellaneous cleanups and small fixes

* tag 'fsdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Flush partial PMDs correctly
  fs/dax: NIT fix comment regarding start/end vs range
  fs/dax: Convert to use vmf_error()

Pull UBI and UBIFS updates from Richard Weinberger:

 - A new interface for UBI to deal better with read disturb

 - Reject unsupported ioctl flags in UBIFS (xfstests found it)

* tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: wl: Silence uninitialized variable warning
  ubifs: Reject unsupported ioctl flags explicitly
  ubi: Expose the bitrot interface
  ubi: Introduce in_pq()

The commit 82c5de0a ("dma-mapping: remove the DMA_MEMORY_EXCLUSIVE
flag") removed the "flags" parameter for dma_declare_coherent_memory().
Remove the parameter from the call in rproc_add_virtio_dev().
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
[bjorn: Extended commit message]
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

After commit 61cb5758 ("cpuidle: Add cpuidle.governor= command
line parameter") new cpuidle governors are not added to the list
of available governors, so governor selection via sysfs doesn't
work as expected (even though it is rarely used anyway).

Fix that by making cpuidle_register_governor() add new governors to
cpuidle_governors again.

Fixes: 61cb5758 ("cpuidle: Add cpuidle.governor= command line parameter")
Reported-by: NKees Cook <keescook@chromium.org>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull NFS server updates from Bruce Fields:
 "Miscellaneous NFS server fixes.

  Probably the most visible bug is one that could artificially limit
  NFSv4.1 performance by limiting the number of oustanding rpcs from a
  single client.

  Neil Brown also gets a special mention for fixing a 14.5-year-old
  memory-corruption bug in the encoding of NFSv3 readdir responses"

* tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux:
  nfsd: allow nfsv3 readdir request to be larger.
  nfsd: fix wrong check in write_v4_end_grace()
  nfsd: fix memory corruption caused by readdir
  nfsd: fix performance-limiting session calculation
  svcrpc: fix UDP on servers with lots of threads
  svcrdma: Remove syslog warnings in work completion handlers
  svcrdma: Squelch compiler warning when SUNRPC_DEBUG is disabled
  svcrdma: Use struct_size() in kmalloc()
  svcrpc: fix unlikely races preventing queueing of sockets
  svcrpc: svc_xprt_has_something_to_do seems a little long
  SUNRPC: Don't allow compiler optimisation of svc_xprt_release_slot()
  nfsd: fix an IS_ERR() vs NULL check

Pull ext4 updates from Ted Ts'o:
 "A large number of bug fixes and cleanups.

  One new feature to allow users to more easily find the jbd2 journal
  thread for a particular ext4 file system"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  jbd2: jbd2_get_transaction does not need to return a value
  jbd2: fix invalid descriptor block checksum
  ext4: fix bigalloc cluster freeing when hole punching under load
  ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
  ext4: Change debugging support help prefix from EXT4 to Ext4
  ext4: fix compile error when using BUFFER_TRACE
  jbd2: fix compile warning when using JBUFFER_TRACE
  ext4: fix some error pointer dereferences
  ext4: annotate more implicit fall throughs
  ext4: annotate implicit fall throughs
  ext4: don't update s_rev_level if not required
  jbd2: fold jbd2_superblock_csum_{verify,set} into their callers
  jbd2: fix race when writing superblock
  ext4: fix crash during online resizing
  ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
  ext4: add mask of ext4 flags to swap
  ext4: update quota information while swapping boot loader inode
  ext4: cleanup pagecache before swap i_data
  ext4: fix check of inode in swap_inode_boot_loader
  ext4: unlock unused_pages timely when doing writeback
  ...

Tariq Toukan says:

====================
mlx4_core misc fixes

This patchset by Jack contains misc fixes to the mlx4 Core driver.

Patch 1 fixes a use-after-free situation by marking (nullifying) the pointer,
  please queue for -stable >= v4.0.
Patch 2 adds a missing lock acquire and release in SRIOV command interface,
  please queue for -stable >= v4.9.
Patch 3 avoids calling roundup_pow_of_two when argument is zero,
  please queue for -stable >= v3.3.

Series generated against net commit:
a3b1933d Merge tag 'mlx5-fixes-2019-03-11' of
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper)
ultimately depends on function roundup_pow_of_two.

If the amount of memory required by the QP is less than one page,
roundup_pow_of_two is called with argument zero.  In this case, the
roundup_pow_of_two result is undefined.

Calling roundup_pow_of_two with a zero argument resulted in the
following stack trace:

UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1
Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015
Call Trace:
dump_stack+0x9a/0xeb
ubsan_epilogue+0x9/0x7c
__ubsan_handle_shift_out_of_bounds+0x254/0x29d
? __ubsan_handle_load_invalid_value+0x180/0x180
? debug_show_all_locks+0x310/0x310
? sched_clock+0x5/0x10
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x260
? find_held_lock+0x35/0x1e0
? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]

Fix this by explicitly testing for zero, and returning one if the
argument is zero (assuming that the next higher power of 2 in this case
should be one).

Fixes: c82e9aa0 ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to
guarantee that there are no FW commands in progress on the comm channel
(for VFs) or wrapped FW commands (on the PF) when SRIOV is active.

We do this by also taking the slave_cmd_mutex when SRIOV is active.

This is especially important when switching from event to polling, since we
free the command-context array during the switch.  If there are FW commands
in progress (e.g., waiting for a completion event), the completion event
handler will access freed memory.

Since the decision to use comm_wait or comm_poll is taken before grabbing
the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the
slave_cmd_mutex as well (to guarantee that the decision to use events or
polling and the call to the appropriate cmd function are atomic).

Fixes: a7e1f049 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As part of unloading a device, the driver switches from
FW command event mode to FW command polling mode.

Part of switching over to polling mode is freeing the command context array
memory (unfortunately, currently, without NULLing the command context array
pointer).

The reset flow calls "complete" to complete all outstanding fw commands
(if we are in event mode). The check for event vs. polling mode here
is to test if the command context array pointer is NULL.

If the reset flow is activated after the switch to polling mode, it will
attempt (incorrectly) to complete all the commands in the context array --
because the pointer was not NULLed when the driver switched over to polling
mode.

As a result, we have a use-after-free situation, which results in a
kernel crash.

For example:
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ...
CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006  04/28/2016
Workqueue: events hv_eject_device_work [pci_hyperv]
task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000
RIP: 0010:[<ffffffff876c4a8e>]  [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90
RSP: 0018:ffff8d17354bfa38  EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8
RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0
R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003
FS:  0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0
Call Trace:
 [<ffffffff876c7adc>] complete+0x3c/0x50
 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core]
 [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core]
 [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core]
 [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core]
 [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0
 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0
 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core]
 [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core]
 [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core]
 [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core]
 [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core]
 [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core]

The fix is to set the command context array pointer to NULL after freeing
the array.

Fixes: f5aef5aa ("net/mlx4_core: Activate reset flow upon fatal command cases")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - rbd will now ignore discards that aren't aligned and big enough to
     actually free up some space (myself). This is controlled by the new
     alloc_size map option and can be disabled if needed.

   - support for rbd deep-flatten feature (myself). Deep-flatten allows
     "rbd flatten" to fully disconnect the clone image and its snapshots
     from the parent and make the parent snapshot removable.

   - a new round of cap handling improvements (Zheng Yan). The kernel
     client should now be much more prompt about releasing its caps and
     it is possible to put a limit on the number of caps held.

   - support for getting ceph.dir.pin extended attribute (Zheng Yan)"

* tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client: (26 commits)
  Documentation: modern versions of ceph are not backed by btrfs
  rbd: advertise support for RBD_FEATURE_DEEP_FLATTEN
  rbd: whole-object write and zeroout should copyup when snapshots exist
  rbd: copyup with an empty snapshot context (aka deep-copyup)
  rbd: introduce rbd_obj_issue_copyup_ops()
  rbd: stop copying num_osd_ops in rbd_obj_issue_copyup()
  rbd: factor out __rbd_osd_req_create()
  rbd: clear ->xferred on error from rbd_obj_issue_copyup()
  rbd: remove experimental designation from kernel layering
  ceph: add mount option to limit caps count
  ceph: periodically trim stale dentries
  ceph: delete stale dentry when last reference is dropped
  ceph: remove dentry_lru file from debugfs
  ceph: touch existing cap when handling reply
  ceph: pass inclusive lend parameter to filemap_write_and_wait_range()
  rbd: round off and ignore discards that are too small
  rbd: handle DISCARD and WRITE_ZEROES separately
  rbd: get rid of obj_req->obj_request_count
  libceph: use struct_size() for kmalloc() in crush_decode()
  ceph: send cap releases more aggressively
  ...

Ido Schimmel says:

====================
mlxsw: Various fixes

Patch #1 fixes the recently introduced QSFP thermal zones to correctly
work with split ports, where several ports are mapped to the same
module.

Patch #2 initializes the base MAC in the minimal driver. The driver is
using the base MAC as its parent ID and without initializing it, it is
reported as all zeroes to user space.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently base_mac is not initialized which causes wrong reporting of
zeroed parent_id to userspace. Fix this by initializing base_mac
properly.

Fixes: c100e47c ("mlxsw: minimal: Add ethtool support")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Verify during thermal initialization if QSFP module's entry is already
configured in order to prevent duplication.
Such scenario could happen in case two switch drivers (PCI and I2C
based) coexist and if after boot, splitting configuration is applied
for some ports and then I2C based driver is re-probed.
In such case after reboot same QSFP module, associated with split will
be discovered by I2C based driver few times, and it will cause a crash.

It could happen for example on system equipped with BMC (Baseboard
Management Controller), running I2C based driver, when the next steps
are performed:
- System boot
- Host side configures port spilt.
- BMC side is rebooted.

Fixes: 6a79507c ("mlxsw: core: Extend thermal module with per QSFP module thermal zones")
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull btrfs fixes from David Sterba:
 "Correctness and a deadlock fixes"

* tag 'for-5.1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zstd: ensure reclaim timer is properly cleaned up
  btrfs: move ulist allocation out of transaction in quota enable
  btrfs: save drop_progress if we drop refs at all
  btrfs: check for refs on snapshot delete resume
  Btrfs: fix deadlock between clone/dedupe and rename
  Btrfs: fix corruption reading shared and compressed extents after hole punching

of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns -EINVAL of it fails.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns NULL of it fails.

Fixes: b356e978 ("sh_eth: add device tree support")
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Reviewed-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>