There is no need to have the 'struct rocker_desc_info *desc_info'
variable static since new value always be assigned before use it.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in DP_INFO message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-10-18

This series provides misc updates to mlx5 core and netdevice driver.

1) From Tariq Toukan: Refactor fragmented buffer struct fields and init flow.

2) From Vlad Buslov, Flow counters cache improvements and fixes follow up.
as a follow up work for the previous series of the mlx5 flow counters,
Vlad provides two fixes:
  2.1) Take fs_counters dellist before addlist
Fixes: 6e5e2283 ("net/mlx5: Add new list to store deleted flow counters")
  2.2) Remove counter from idr after removing it from list
Fixes: 12d6066c ("net/mlx5: Add flow counters idr")

From Shay Agroskin,
3) Add FEC set/get FW commands and FEC ethtool callbacks support
4) Add new ethtool statistics to cover errors on rx, such as FEC errors.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrey reported the following warning triggered while running CRIU tests:

tcp_clean_rtx_queue()
...
	last_ackt = tcp_skb_timestamp_us(skb);
	WARN_ON_ONCE(last_ackt == 0);

This is caused by 5f6188a8 ("tcp: do not change tcp_wstamp_ns
in tcp_mstamp_refresh"), as we end up having skbs in retransmit queue
with a zero skb->skb_mstamp_ns field.

We could fix this bug in different ways, like making sure
tp->tcp_wstamp_ns is not zero at socket creation, but as Neal pointed
out, we also do not want that pacing status of a repaired socket
could push tp->tcp_wstamp_ns far ahead in the future.

So we prefer changing tcp_write_xmit() to not call tcp_update_skb_after_send()
and instead do what is requested by TCP_REPAIR logic.

Fixes: 5f6188a8 ("tcp: do not change tcp_wstamp_ns in tcp_mstamp_refresh")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Vagin <avagin@openvz.org>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds checksum offload and TSO support for the HiNIC
driver. Perfomance test (Iperf) shows more than 100% improvement
in TCP streams.
Signed-off-by: NZhao Chen <zhaochen6@huawei.com>
Signed-off-by: NXue Chaojing <xuechaojing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On multi adapter setup if the uld registration fails even on
one adapter, the allocated resources for the uld on all the
adapters are freed, rendering the functioning adapters unusable.

This commit fixes the issue by freeing the allocated resources
only for the failed adapter.
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The struct type was copied from the line before but it should be "tx"
instead of "rx".  I have reviewed the code and I can't immediately see
that this bug causes a runtime issue.

Fixes: 36e53349 ("bnxt_en: Add additional extended port statistics.")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Doc Updates 2018-10-18

This series contains documentation fixes and updates for Intel wired
LAN drivers.

The following was done:
 - Updated incorrect URLs
 - removed document references which did not apply to the current
   in-kernel drivers
 - added documentation for fm10k driver
 - added missing documentation on existing or new features
 - added SPDX headers to all the documentation files

Lastly, the documentation was converted over to the RST (reStructured
Text) format, so that 'make htmldocs' produces pretty html driver
documentation for our drivers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clang warns:

drivers/atm/eni.c:244:48: error: for loop has empty body
[-Werror,-Wempty-body]
        for (order = 0; (1 << order) < *size; order++);
                                                      ^
drivers/atm/eni.c:244:48: note: put the semicolon on a separate line to
silence this warning

In this case, that loop is expected to be empty so silence the warning
in the way that Clang suggests.

Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update Shrijeet's email address for the VRF entry.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These are counters for errors received on rx side, such as
FEC errors.
Signed-off-by: NShay Agroskin <shayag@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Added "Per lane raw errors" capability bit in
Ports Capabilities Mask (PCAM) enhanced features
layout.

This bit determines if the fields "phy_raw_errors_laneX"
in "Physical Layer statistical" counters group are supported.
Signed-off-by: NShay Agroskin <shayag@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Driver callback function for 'ethtool --show-fec',
'ethtool --set-fec' commands.

The query function returns active and configured FEC policy
for current link speed.

The set function sets FEC policy for all supported link
speeds.
1) If current link speed doesn't support requested FEC policy,
   the function fails.
2) If a different link speed doesn't support requested FEC
   policy, FEC capbilities for this speed are turned off.
Signed-off-by: NShay Agroskin <shayag@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Added functions to query and set link FEC policy.
To get/set FEC capabilities in PPLM reg we need to query
current link speed.
'mlx5_get_fec_speed_field' queries current link speed and returns
correct field offset.

FEC Query's return value is divided into 'active FEC policy', which is
the FEC policy used by the link, and 'configured FEC policy', which
is the FEC policy requested by the user.
The two values may differ if:
1) FEC policy was configured to 'auto',
   in which case the active FEC policy would be the default FEC policy
   for current link speed.

2) FEC policy was changed, but no link reset is performed. In which case,
   the active FEC policy would become the configured one after a link
   reset.

FEC set function sets FEC policy for all link speeds and perform link
reset.
1) If current link speed doesn't support requested FEC policy,
   the function fails.
2) If a different link speed doesn't support requested FEC policy,
   FEC capbilities for this speed are turned off and a warning message
   is printed.
Signed-off-by: NShay Agroskin <shayag@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Added FEC related fields to PPLM layout.
These fields are needed to set and query FEC policy
for different link speeds.
Signed-off-by: NShay Agroskin <shayag@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fs_counters list can temporary become unsorted when new counters are
created/deleted concurrently. Idr is used to quickly lookup position to
insert new counter in logarithmic time. However, if new flows are
concurrently inserted during time window when flows with adjacent ids are
already removed from idr but are still present in counters list,
mlx5_fc_stats_work() observes counters list in inconsistent state, which
results following warning:

[ 1839.561955] mlx5_core 0000:81:00.0: mlx5_cmd_fc_bulk_get:587:(pid 729): Flow counter id (0x102d5) out of range (0x1c0a8..0x1c10b). Counter ignored.

Move idr_remove() call to be executed synchronously with counter deletion
from list. Extract this code to mlx5_fc_stats_remove() helper function that
is called by workqueue job handler mlx5_fc_stats_work().

Fixes: 12d6066c ("net/mlx5: Add flow counters idr")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>

In fs_counters elements from both addlist and dellist are removed by
mlx5_fc_stats_work() without any locking. This introduces race condition
when batch of new rules is created and then immediately deleted (for
example, when error occurred during flow creation). In such case some of
the rules might be in dellist, but not in addlist when mlx5_fc_stats_work()
is executed concurrently with tc, which will result rule deletion and
use-after-free on next iteration because deleted rules are still in
addlist.

Always take dellist first to guarantee that rules can only be deleted after
they were removed from addlist.

Fixes: 6e5e2283 ("net/mlx5: Add new list to store deleted flow counters")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reported-by: NChris Mi <chrism@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>

Take struct mlx5_frag_buf out of mlx5_frag_buf_ctrl, as it is not
needed to manage and control the datapath of the fragmented buffers API.

struct mlx5_frag_buf contains control info to manage the allocation
and de-allocation of the fragmented buffer.
Its fields are not relevant for datapath, so here I take them out of the
struct mlx5_frag_buf_ctrl, except for the fragments array itself.

In addition, modified mlx5_fill_fbc to initialise the frags pointers
as well. This implies that the buffer must be allocated before the
function is called.

A set of type-specific *_get_byte_size() functions are replaced by
a generic one.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Now that the documents have been updated to conform to the reStructured Text
guidelines, we can now change the file extensions and update the other
related references.

This converts all of the Intel wired LAN driver documentation to *.rst.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Added the fm10k kernel documentation, which apparently was missing.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Acked-by: NShannon Nelson <shannon.nelson@oracle.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Before making the conversion to the RST (reStructured Text) format, there
are changes needed to the documentation so that there are no build errors.

Also fixed old/broken URLs to the correct or updated URL.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

Add the SPDX-Lincense-Identifier to the Intel wired Ethernet *.rst
kernel documentation.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>

NAPI is enabled by default and IXGB_NAPI was removed since
commit 6d37ab28 ("ixgb: make NAPI the only option and the default")
Update the doc accordingly.
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Xin Long says:

====================
sctp: fix sk_wmem_queued and use it to check for writable space

sctp doesn't count and use asoc sndbuf_used, sk sk_wmem_alloc and
sk_wmem_queued properly, which also causes some problem.

This patchset is to improve it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sk->sk_wmem_queued is used to count the size of chunks in out queue
while sk->sk_wmem_alloc is for counting the size of chunks has been
sent. sctp is increasing both of them before enqueuing the chunks,
and using sk->sk_wmem_alloc to check for writable space.

However, sk_wmem_alloc is also increased by 1 for the skb allocked
for sending in sctp_packet_transmit() but it will not wake up the
waiters when sk_wmem_alloc is decreased in this skb's destructor.

If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf,
the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf()
will keep waiting if there's a skb allocked in sctp_packet_transmit,
and later even if this skb got freed, the waiting thread will never
get waked up.

This issue has been there since very beginning, so we change to use
sk->sk_wmem_queued to check for writable space as sk_wmem_queued is
not increased for the skb allocked for sending, also as TCP does.

SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto
tuning which I will add in another patch.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now it's confusing that asoc sndbuf_used is doing memory accounting with
SCTP_DATA_SNDSIZE(chunk) + sizeof(sk_buff) + sizeof(sctp_chunk) while sk
sk_wmem_alloc is doing that with skb->truesize + sizeof(sctp_chunk).

It also causes sctp_prsctp_prune to count with a wrong freed memory when
sndbuf_policy is not set.

To make this right and also keep consistent between asoc sndbuf_used, sk
sk_wmem_alloc and sk_wmem_queued, use skb->truesize + sizeof(sctp_chunk)
for them.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2018-10-17

This series adds support for the new igc driver.

The igc driver is the new client driver supporting the Intel I225
Ethernet Controller, which supports 2.5GbE speeds.  The reason for
creating a new client driver, instead of adding support for the new
device in e1000e, is that the silicon behaves more like devices
supported in igb driver.  It also did not make sense to add a client
part, to the igb driver which supports only 1GbE server parts.

This initial set of patches is designed for basic support (i.e. link and
pass traffic).  Follow-on patch series will add more advanced support
like VLAN, Wake-on-LAN, etc..
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx5-updates-2018-10-17

========================================================================

From Or Gerlitz <ogerlitz@mellanox.com>:

This series from Paul adds support to mlx5 e-switch tc offloading of multiple priorities and chains.

This is made of four building blocks (along with few minor driver refactors):

[1] Split FDB fast path prio to multiple namespaces

Currently the FDB name-space contains two priorities, fast path (p0) and slow path (p1).
The slow path contains the per representor SQ send-to-vport TX rule and the match-all
RX miss rule. As a pre-step to support multi-chains and priorities, we split the FDB fast path
to multiple namespaces  (sub namespaces), each with multiple priorities.

[2] E-Switch chains and priorities

A chain is a group of priorities. We use the fdb parallel sub-namespaces to implement chains,
and a flow table for each priority in them.

Because these namespaces are parallel and in series to the slow path
fdb, the chains aren't connected to each other (but to the slow path),
and one must use a explicit goto action to reach a different chain.

Flow tables for the priorities are created on demand and destroyed
once not used.

[3] Add a no-append flow insertion mode, use it for TC offloads

Enhance the driver fs core, such that if a no-append flag is set by the caller,
we add a new FTE, instead of appending the actions of the inserted rule when
the same match already exists.

For encap rules, we defer the HW offloading till we have a valid neighbor. This can
result in the packet hitting a lower priority rule in the HW DP. Use the no-append API
to push these packets to the slow path FDB table, so they go to the TC kernel DP as done
before priorities where supported.

[4] Offloading tc priorities and chains for eswitch flows

Using [1], [2] and [3] above we add the support for offloading both chains
and priorities. To get to a new chain, use the tc goto action. We support
a fixed prio range 1-16, and chains 0-3.
=============================================================================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-10-18

1) Remove an unnecessary dev->tstats check in xfrmi_get_stats64.
   From Li RongQing.

2) We currently do a sizeof(element) instead of a sizeof(array)
   check when initializing the ovec array of the secpath.
   Currently this array can have only one element, so code is
   OK but error-prone. Change this to do a sizeof(array)
   check so that we can add more elements in future.
   From Li RongQing.

3) Improve xfrm IPv6 address hashing by using the complete IPv6
   addresses for a hash. From Michal Kubecek.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the new API to enable usage of LLQ.
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>