Remove whitespace and use tab as indent
Acked-by: NFelipe Balbi <balbi@kernel.org>
Signed-off-by: NWei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210801055454.53015-1-jj251510319013@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct pxa25x_ep_ops is only assigned to the ops field in the
usb_ep struct, which is a pointer to const struct usb_ep_ops.
Make it const to allow the compiler to put it in read-only memory.
Acked-by: NFelipe Balbi <balbi@kernel.org>
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210728092052.4178-1-rikard.falkeborn@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a new compatible for SDM660's DWC3.
Acked-by: NFelipe Balbi <balbi@kernel.org>
Signed-off-by: NKonrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728221921.52068-1-konrad.dybcio@somainline.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If we fail to create qtd cache we were not destroying the
urb_listitem, rework the error handling logic to cope with that.
Signed-off-by: NRui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210727100516.4190681-4-rui.silva@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When polling for a setup or clear of a register field we were sleeping
in atomic context but using a very tight sleep interval.

Since the use cases for this poll mechanism are only in setup and
stop paths, and in practice this poll is not used most of the times
but needs to be there to comply to hardware setup times, remove the
sleep time and make the poll loop tighter.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210727100516.4190681-3-rui.silva@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove debug message leftover from the boot error buffer.
Signed-off-by: NRui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210727100516.4190681-2-rui.silva@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With usb3 we handle many more requests. Decrease the interrupt load by
only enabling the interrupt every quarter of the allocated requests.
Reviewed-by: NPaul Elder <paul.elder@ideasonboard.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

--
v1 -> v2: - edited patch description
	  - removed extra parantheses
	  - added a comment for the logic
	  - using unsigned int instead of int
	  - reinitializing req_int_count in uvcg_video_enable
v2 -> v3: -
Link: https://lore.kernel.org/r/20210628155311.16762-6-m.grzeschik@pengutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for scatter gather transfers. If the underlying
gadgets sg_supported == true, then the videeobuf2-dma-sg is used and the
encode routine maps all scatter entries to separate scatterlists for the
usb gadget.

When streaming 1080p with request size of 1024 times 3 bytes top shows a
difference of about 6.4% CPU load applying this patch:

 PID USER      PR  NI    VIRT    RES  %CPU  %MEM     TIME+ S COMMAND

  64 root       0 -20    0.0m   0.0m   7.7   0.0   0:01.25 I [kworker/u5:0-uvcvideo]
  83 root       0 -20    0.0m   0.0m   4.5   0.0   0:03.71 I [kworker/u5:3-uvcvideo]
 307 root     -51   0    0.0m   0.0m   3.8   0.0   0:01.05 S [irq/51-dwc3]

vs.

  64 root       0 -20    0.0m   0.0m   5.8   0.0   0:01.79 I [kworker/u5:0-uvcvideo]
 306 root     -51   0    0.0m   0.0m   3.2   0.0   0:01.97 S [irq/51-dwc3]
  82 root       0 -20    0.0m   0.0m   0.6   0.0   0:01.86 I [kworker/u5:1-uvcvideo]
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-5-m.grzeschik@pengutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The v4l2_dev has no corresponding device to it. We will
point it to the gadget's dev.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-4-m.grzeschik@pengutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

While sending bigger images is possible with USB_SPEED_SUPER it is
better to use more isochronous requests in flight. This patch makes the
number uvc_num_requests dynamic by changing it depending on the gadget
speed.
Reviewed-by: NPaul Elder <paul.elder@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-3-m.grzeschik@pengutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In case of dwc3 it is possible that the sysdev is the parent of the
controller. To ensure the right dev is set to the gadget's dev parent we
will hand over sysdev instead of dev, which will always point to the
controller.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-2-m.grzeschik@pengutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support suspend/resume for dual-role mode including the single
port and multi-ports supported by host controller, when the host
supports mult-ports, only port0 (u2/u3) is used to support dual
role mode.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-14-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support suspend/resume for device mode if the device is not
connected with a host, otherwise reject to suspend.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-13-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add helper to power on/down device ports and ip, it will be
used when support device suspend/resume
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-12-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a dedicated wakeup irq for runtime suspend/resume, and interrupts
names are provided if using wakeup irq, this patch only support host
mode.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-11-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Extract two helpers for host suspend and resume, will make it easy
to support dual-role mode suspend/resume later.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-10-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others
for the same SoC.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-9-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support default mode config when use usb-role-switch
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-8-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helper usb_get_role_switch_default_mode() to
get property of "role-switch-default-mode"
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-7-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add helper to get "role-switch-default-mode", and convert it
to the corresponding enum usb_dr_mode
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-6-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.

To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.

Fixes: 0b1b7137 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mipi_dsi_device allocated by mipi_dsi_device_register_full() is
already free'd on release.

Fixes: 2f733d61 ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech

WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
  Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y]
  Selected by [y]:
  - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y]
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Align the member description comments for struct ravb_desc by
removing the extra TAB.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NSergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the typo RX->TX in comment, as the code following the comment
process TX and not RX.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NSergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This simple series of commands:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0

fails on sja1105 with the following error:
[   33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN
[   33.447710] sja1105 spi0.1: Invalid config, cannot upload
Warning: sja1105: Failed to change VLAN Ethertype.

For context, sja1105 has 3 operating modes:
- SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the
  bridge_vlans are committed to hardware

Swapping out a VLAN list and another in happens in
sja1105_build_vlan_table(), which performs a delta update procedure.
That function is called from a few places, notably from
sja1105_vlan_filtering() which is called from the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler.

The above set of 2 commands fails when run on a kernel pre-commit
8841f6e6 ("net: dsa: sja1105: make devlink property
best_effort_vlan_filtering true by default"). So the priv->vlan_state
transition that takes place is between VLAN-unaware and full VLAN
filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans
are swapped in.

So why does it fail?

Well, the bridge driver, through nbp_vlan_init(), first sets up the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then
proceeds to call nbp_vlan_add for the default_pvid.

So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in
the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge
VLANs (yet). So we have wiped the VLAN table clean, and the low-level
static config checker complains of an invalid configuration. We _will_
add the bridge VLANs using the dynamic config interface, albeit later,
when nbp_vlan_add() calls us. So it is natural that it fails.

So why did it ever work?

Surprisingly, it looks like I only tested this configuration with 2
things set up in a particular way:
- a network manager that brings all ports up
- a kernel with CONFIG_VLAN_8021Q=y

It is widely known that commit ad1afb00 ("vlan_dev: VLAN 0 should be
treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net
device that comes up. DSA treats these VLANs as bridge VLANs, and
therefore, in my testing, the list of bridge_vlans was never empty.

However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when
it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily
empty, and the sja1105_static_config_reload() call from
sja1105_vlan_filtering() will fail.

To fix this, the simplest thing is to keep VID 4095, the one used for
CPU-injected control packets since commit ed040abc ("net: dsa:
sja1105: use 4095 as the private VLAN for untagged traffic"), in the
list of bridge VLANs too, not just the list of tag_8021q VLANs. This
ensures that the list of bridge VLANs will never be empty.

Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Reported-by: NRadu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Regression found in some embedded panels traces back to the earliest
upstreamed ASSR patch. The changed code flow are causing problems
with some panels.

[How]
- Change ASSR enabling code while preserving original code flow
  as much as possible
- Simplify the code on guarding with internal display flag

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add Yellow Carp PCI id support.

v2: add another DID
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

0x1681 has a different external revision id.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for board power calibration on Aldebaran.
Board calibration is done after DC offset calibration.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PMFW message which previously thought to only control Z9 controls both
Z9 and Z10. Also HW design team requested that Z9 must only be supported
on eDP due to content protection interop.

[How]
Change zstate support condition to match updated policy
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Populate dtbclk values from bwparams for dcn302, dcn303.

[How]
dtbclk values are fetched from bandwidthparams for all DPM levels and
for DPM levels where smu returns 0, previous level values are reported.
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines
of 4K resolution lines to 5 lines of 4K resolution lines. All Line
Buffer can be used as extended memory for P State change latency hiding.
The maximum number of lines is increased to 32 lines. Finally,
LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB
memory piece 2) are not affected, no change in size, only 3 pieces is
affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0
and LB_MEMORY_CONFIG_3 (for 4:2:0) modes.
Reviewed-by: NJun Lei <jun.lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to
DMUB just remove the function pointer.

[how]
Remove apply_idle_power_optimizations from function pointers structure
for DCN31
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.

[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: NKrunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NCamille Cho <Camille.Cho@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.

Put in a hardcoded default until we have the interface in place.
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.

In the case where the hardcode is also missing we can't lightup display.

[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Initialize socclk entries in bandwidth params for dcn302, dcn303.

[How]
Fetch the sockclk values from smu for the DPM levels and for the DPM
levels where smu returns 0, previous level values are reported.
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.

Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.

An example of such a timing would be 640x480@72Hz:

h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000

[How]
Include borders as part of destination vactive/hactive.

This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.

Most modes do not have vertical or horizontal borders.
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>