Add ->tf_{load,read} methods so outb()/inb() and mm_outw()/mm_inw()
can be used directly.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ->tf_{load,read} methods so cris_ide_{outb,outw,inb,inw}()
can be used directly.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ->tf_load and ->tf_read methods to ide_hwif_t and set the default
  methods in default_hwif_transport().

* Use ->tf_{load,read} instead o calling ide_tf_{load,read}() directly.

* Make ide_tf_{load,read}() static.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out debugging code from ide_tf_load() to ide_tf_dump() helper
and update ide_tf_load() users accordingly.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_execute_pkt_cmd() helper for executing PACKET command,
then convert ATAPI device drivers to use it.

As a nice side-effect this fixes ide-{floppy,tape,scsi} w.r.t.
ide_lock taking (ide-cd was OK).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Always use ->OUTBSYNC method for executing commands so the posting is done
if needed (this affects only pmac and scc_pata host drivers at the moment).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* proc_reports_siimage() is now only called by init_chipset_siimage()
  so inline it there.

* Use array instead of switch statement for reporting clock modes.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to
merge code accessing configuration registers through PCI and MMIO together.

[ because of this SATA initialization bits from setup_mmio_siimage() are
  moved to init_chipset_siimage() ]

This also cuts code size a bit:

   text    data     bss     dec     hex filename
   4437     164       0    4601    11f9 drivers/ide/pci/siimage.o.before
   3979     164       0    4143    102f drivers/ide/pci/siimage.o.after

While at it:

* Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}.

* Fixup CodingStyle in setup_mmio_siimage().

* Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage().

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Do clocking register posting earlier in setup_mmio_siimage()
to match code in init_chipset_siimage().

This is a preparation for the next patch which merges PCI and MMIO
code paths together.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use ins{w,l}()/outs{w,l}() and __ide_mm_ins{w,l}()/__ide_mm_outs{w,l}()
  directly in ata_{in,out}put_data() (by using IDE_HFLAG_MMIO host flag to
  decide which I/O ops are required).

* Remove no longer needed ->INS{W,L} and ->OUTS{W,L} methods (ide-h8300,
  au1xxx-ide and scc_pata implement their own ->{in,out}put_data methods).

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_MMIO host flag and set it for hosts which use
  default_hwif_mmiops().

v2:
* Fix kernel panic in pmac host driver (',' should be '|').

  Thanks to Kamalesh for reporting it + testing the fix
  and to Andrew for hinting me about the source of the issue.

Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

v2:

* Update ->{in,out}_data methods to take 'struct request *rq' argument.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

v2:

* Update ->{in,out}_data methods to take 'struct request *rq' argument.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

v2:

* Update ->{in,out}_data methods to take 'struct request *rq' argument
  (thanks to Stephen Rothwell for catching it).

There should be no functional changes caused by this patch.

Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Merge ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods
  into new ->{in,out}put_data methods which take number of bytes to
  transfer as an argument and always do padding.

While at it:

* Use 'hwif' or 'drive->hwif' instead of 'HWIF(drive)'.

There should be no functional changes caused by this patch (all users
of ->ata_{in,out}put_data methods were using multiply-of-4 word counts).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods to
  falconide and q40ide host drivers (->ata_* methods are implemented on
  top of ->atapi_* methods so they also do byte-swapping now).

* Cleanup atapi_{in,out}put_bytes().

v2:
* Add 'struct request *rq' argument to ->ata_{in,out}put_data methods
  and don't byte-swap disk fs requests (we shouldn't un-swap fs requests
  because fs itself is stored byte-swapped on the disk) - this is how
  things were done before the patch (ideally device mapper should be
  used instead but it would break existing setups and would have some
  performance impact).

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michael Schmitz <schmitz@debian.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Richard Zidlicky <rz@linux-m68k.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Monday 28 April 2008, Sergei Shtylyov wrote:
> Hello, I wrote:
> 
> > Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c:
> 
> > include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared 
> > `static' but never defined
> > include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared
> >  `static' but never defined
> 
> > by wiping out the whole "function prototyping" section from the header file
> > <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are
> > already dead in the IDE driver; move the only useful prototype into the driver.
> > 
> > Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
> 
> > ---
> > I'm not sure thru which tree this should go -- probably thru Linux/MIPS one...
> 
> > Bart, au1xxx-ide-fix-mwdma-support.patch will probably need to be updated to
> > remove that added prototype since it won't be needed anymore...
> 
>     Which you haven't done either in that patch or in 
> au1xxx-ide-use-init_dma-method.patch. So, face the consequences:
> 
> drivers/ide/mips/au1xxx-ide.c:456: error: conflicting types for 'auide_ddma_init'
> drivers/ide/mips/au1xxx-ide.c:51: error: previous declaration of
> 'auide_ddma_init' was here
> drivers/ide/mips/au1xxx-ide.c:456: error: conflicting types for 'auide_ddma_init'
> drivers/ide/mips/au1xxx-ide.c:51: error: previous declaration of
> 'auide_ddma_init' was here
> drivers/ide/mips/au1xxx-ide.c:51: warning: 'auide_ddma_init' used but never
> defined

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (45 commits)
  [MIPS] Pb1200/DBAu1200: move platform code to its proper place
  [MIPS] Fix handling of trap and breakpoint instructions
  [MIPS] Pb1200: do register SMC 91C111
  [MIPS] DBAu1200: fix bad SMC 91C111 resource size
  [NET] Kconfig: Rename MIKROTIK_RB500 -> MIKROTIK_RB532
  [MIPS] IP27: Fix build bug due to missing include
  [MIPS] Fix some sparse warnings on traps.c and irq-msc01.c
  [MIPS] cevt-gt641xx: Kill unnecessary include
  [MIPS] DS1287: Add clockevent driver
  [MIPS] add DECstation I/O ASIC clocksource
  [MIPS] rbtx4938: minor cleanup
  [MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro
  [MIPS] rbtx4938: misc cleanups
  [MIPS] jmr3927: use generic txx9 gpio
  [MIPS] rbhma4500: use generic txx9 gpio
  [MIPS] generic txx9 gpio support
  [MIPS] make fallback gpio.h gpiolib-friendly
  [MIPS] unexport null_perf_irq() and make it static
  [MIPS] unexport rtc_mips_set_time()
  [MIPS] unexport copy_from_user_page()
  ...

This bug was introduced in the 2.6.24 i386/x86_64 tree merge, where
MSI-X vector allocation will eventually fail.  The cause is the new
bit array tracking used vectors is not getting cleared properly on
IRQ destruction on the 32-bit APIC code.

This can be seen easily using the ixgbe 10 GbE driver on multi-core
systems by simply loading and unloading the driver a few times.
Depending on the number of available vectors on the host system, the
MSI-X allocation will eventually fail, and the driver will only be
able to use legacy interrupts.

I am generating the same patch for both stable trees for 2.6.24 and
2.6.25.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bitops source file was renamed, so fix docbook for that.
docproc: linux-2.6.25-git11/include/asm-x86/bitops_32.h: No such file or directory
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: Fix a RCU free problem with the netport cache
  SELinux: Made netnode cache adds faster
  SELinux: include/security.h whitespace, syntax, and other cleanups
  SELinux: policydb.h whitespace, syntax, and other cleanups
  SELinux: mls_types.h whitespace, syntax, and other cleanups
  SELinux: mls.h whitespace, syntax, and other cleanups
  SELinux: hashtab.h whitespace, syntax, and other cleanups
  SELinux: context.h whitespace, syntax, and other cleanups
  SELinux: ss/conditional.h whitespace, syntax, and other cleanups
  SELinux: selinux/include/security.h whitespace, syntax, and other cleanups
  SELinux: objsec.h whitespace, syntax, and other cleanups
  SELinux: netlabel.h whitespace, syntax, and other cleanups
  SELinux: avc_ss.h whitespace, syntax, and other cleanups

Fixed up conflict in include/linux/security.h manually

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* endianness annotations
* endianness fixes
* missing get_unaligned/put_unaligned

It's pretty much all over the place, changes to different files are independent.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Serial-parts-Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

usb_control_msg() converts arguments to little-endian itself,
doing that in caller means breakage on big-endian boxen.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

again, fallout from ide merge
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

it's ata_link, not ata_linke
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

psr is not a good name for local variable in macro body when it
has a good chance of being the argument of said macro (actually
is at least in one place)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* EXTRA_CFLAGS do not apply for *.S
* don't bother with symlinks to ../lib/mem*.S, just add ../lib/mem*.o
  to object list
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: video drivers: add facility level
  sparc: tcx.c make tcx_init and tcx_exit static
  sparc: ffb.c make ffb_init and ffb_exit static
  sparc: cg14.c make cg14_init and cg15_exit static
  sparc: bw2.c fix bw2_exit
  sparc64: Fix accidental syscall restart on child return from clone/fork/vfork.
  sparc64: Clean up handling of pt_regs trap type encoding.
  sparc: Remove old style signal frame support.
  sparc64: Kill bogus RT_ALIGNEDSZ macro from signal.c
  sparc: sunzilog.c remove unused argument
  sparc: fix drivers/video/tcx.c warning
  sparc64: Kill unused local ISA bus layer.
  input: Rewrite sparcspkr device probing.
  sparc64: Do not ignore 'pmu' device ranges.
  sparc64: Kill ISA_FLOPPY_WORKS code.
  sparc64: Kill CONFIG_SPARC32_COMPAT
  sparc64: Cleanups and corrections for arch/sparc64/Kconfig
  sparc64: Fix wedged irq regression.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Allow building iwl3945 without iwl4965.
  wireless: Fix compile error with wifi & leds
  tcp: Fix slab corruption with ipv6 and tcp6fuzz
  ipv4/ipv6 compat: Fix SSM applications on 64bit kernels.
  [IPSEC]: Use digest_null directly for auth
  sunrpc: fix missing kernel-doc
  can: Fix copy_from_user() results interpretation
  Revert "ipv6: Fix typo in net/ipv6/Kconfig"
  tipc: endianness annotations
  ipv6: result of csum_fold() is already 16bit, no need to cast
  [XFRM] AUDIT: Fix flowlabel text format ambibuity.

this option has been the default on a wide range of distributions
for a long time - time to make it non-experimental.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  hrtimer: timeout too long when using HRTIMER_CB_SOFTIRQ

Since both the IDE interface and SMC 91C111 Ethernet chip are on-board
devices, not SOC devices, move the platform device registration form the
common to the board specific code.

While at it, remove semicolon (which didn't break compilation only by
chance) from the AU1XXX_ATA_DDMA_REQ macro and do some renaming:

- change 'au1200_ide0_' variable name prefix to the mere 'ide_';

- change 'smc91x_' variable name prefix to 'smc91c111_' since that's the
  name of the chip used on the boards;

- drop 'AU1XXX_' prefix from the names of macros describing IDE and Ethernet
  on-board devices;

- change 'SMC91111_' to 'SMC91C111_', change 'IRQ' to 'INT' in the names of
  the macros describing the Ethernet chip for consistency with the IDE
  macros;

- change 'ATA_' to 'IDE_' and 'OFFSET' to 'SHIFT' (since this value is
  indeed a shift count) in the names of the macros describing the IDE
  interface.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

With fixes and cleanups from Atsushi Nemoto (anemo@mba.ocn.ne.jp).
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pb1200 does have SMC 91C111 Ethernet chip on board but the platform code
did not register it, so one couldn't mount NFS...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>