- 16 7月, 2008 40 次提交
-
-
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it: - add uptodate variable + leave just one idetape_end_request() call - don't use HWGROUP() macro Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
idetape_retry_pc() always returns ide_stopped so make it void. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Log device name instead of driver name in *_pc_intr() and *_transfer_pc*(). While at it: * Merge two consecutive printk()-s in *_pc_intr() together. * Replace "floppy"/"tape"/"scsi" references in printk()-s by "device". Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Check IDEFLOPPY_FLAG_ZIP_DRIVE flag in idefloppy_transfer_pc1() and skip idefloppy_transfer_pc2()-phase if the flag is not set. * Always use idefloppy_transfer_pc1() in idefloppy_issue_pc() and remove no longer needed idefloppy_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
PC_FLAG_DMA_IN_PROGRESS flag is never set if DMA support is disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add debug_log() macro and convert the driver to use it. [ This makes debug messages to be always prefixed with "ide-scsi: " and use KERN_INFO level. ] While at it: * Change "DMA complete" debug message to "DMA finished" to match other ATAPI device drivers. * Use __func__. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
ide_set_handler() bugs on ->handler == NULL so no need to do it in idescsi_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Merge idescsi_input_buffers() and idescsi_output_buffers() into ide_scsi_io_buffers() helper. While at it: * Log device name instead of driver name on error. * Use xfer_func_t. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Set PC_FLAG_WRITING pc flag in idescsi_queue() (if needed) and then fix Interrupt Reason checking in idescsi_pc_intr(). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Check return value of ->dma_end method and if there was a DMA error handle it accordingly (set PC_FLAG_DMA_ERROR pc flag, don't update pc->xferred and increase rq->errors). Also move debug message in the right place while at it. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
If DRQ bit of Status Register is not cleared it is an error condition and should be handled accordingly (disable DMA + reset the device). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Start DMA engine before sending content of packet command (otherwise it is possible that IRQ will happen before DMA engine is started). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
ide_do_drive_cmd is called only with ide_preempt action argument. So we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. This patch also includes two minor cleanups: 1) ide_do_drive_cmd always succeeds so we don't need the return value; 2) the callers use blk_rq_init before ide_do_drive_cmd so there is no need to initialize rq->errors. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
All the callers of ide_do_drive_cmd() except for ide-scsi use ide_preempt action argument. This converts ide-scsi to use blk_execute_rq_nowait instead of ide_do_drive_cmd so that we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Remove drive->ctl (it is always equal to 0x08 after init time). While at it: * Use ATA_DEVCTL_OBS define. There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup() and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely remove ->mmio flag. There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move IRQ unmasking out from ->tf_load method to its users. There should be no functional changes caused by this patch (SELECT_MASK() is NOP except for hpt366, icside and sgiioc4). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK taskfile flag. This change should only affect hpt366 and icside host drivers since ->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Fix one place in do_probe() which used ->OUTB directly instead of calling SELECT_DRIVE() (so ->selectproc method is also used). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
This is a preparation for removal of ->dma_status field from ide_hwif_t. There should be no functional changes caused by this patch. Acked-by: NJeremy Higdon <jeremy@sgi.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Just use the new & shiny ide_pad_transfer() helper instead. Also remove the superfluous check for 'drive->media == ide_disk' while at it (ide_ata_error() is used only for ide_disk devices). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove obsoleted "ide=" kernel parameters. * Remove no longer needed: - ide_setup() - parse_options() - __setup("", ...) - module_param(options, ...) * Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef. * Make ide_*acpi* and ide_doubler variables static. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove no longer need init_ide_data() call from ide_setup(). * Cleanup init_ide_data(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove obsoleted "hdx=" kernel parameters. * Remove no longer used stridx() and match_parm(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove obsoleted "idebus=" kernel parameter. * Remove no longer needed ide_system_bus_speed() and system_bus_clock() (together with idebus_parameter and system_bus_speed variables). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
All the users of blk_end_sync_rq has gone (they are converted to use blk_execute_rq). This unexports blk_end_sync_rq. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
Some uses blk_put_request asymmetrically, that is, they uses it with requests that not allocated by blk_get_request. As a result, blk_put_request has a hack to catch a NULL request_queue. Now such callers are fixed (they use blk_get_request properly). So we can safely remove the hack in blk_put_request. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
pd_special_command uses blk_put_request with struct request on the stack. As a result, blk_put_request needs a hack to catch a NULL request_queue. This converts pd_special_command to use blk_execute_rq. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
ide_cd_init_rq is not used by ide-cd_ioctl any more. Only cdrom_queue_request_sense use it. This converts cdrom_queue_request_sense to use blk_rq_init directly and removes ide_cd_init_rq. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 FUJITA Tomonori 提交于
ide_init_drive_cmd just calls blk_rq_init. This converts the users of ide_init_drive_cmd to use blk_rq_init directly and removes ide_init_drive_cmd. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-