Atm the DPT object can accommodate only one VMA, so the VMA offset will
be always 0. Add an assert for this.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-4-imre.deak@intel.com

At the moment CCS FB strides must be power-of-two sized, but a follow-up
change will add support remapping these FBs, allowing the FB passed in
by userspace to have a non-POT sized stride. For these remapped FBs we
can only remap the main surface, not the CCS surface. This means that
userspace has to always generate the CCS surface aligning to the POT
stride padded main surface (by setting up the CCS AUX pagetables
accordingly). Adjust the CCS surface stride check to enforce this.

No functional change.

v2:
- Fix the gen12_ccs_aux_stride() is not static sparse warning.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-3-imre.deak@intel.com

The tile size for all surface types is 4 kbyte (or 2 kbyte on old
platforms), with the exception of the TGL/ADL CCS surface where the tile
size is 64 bytes. To be able to remap CCS FBs the CCS surface tile needs
to be defined as 4 kbyte as well (the granularity of GTT pages in a
remapped view).

The only place using the dimension of the 64 byte CCS area is the initial
check for the main vs. CCS plane origin coordinate match. To prepare for
adding support for remapping CCS FBs let's call the 64 byte CCS area a
'tile block' and add a helper to retrieve the dimensions for it.

No functional change.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-2-imre.deak@intel.com

The w/a database lists this for both ctg and elk. So let's apply it to
elk as well. And add the w/a name.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-5-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

The intention was to check whether the primary plane is enabled
without any sprites planes being enabled. Instead we ended up checking
whether just any one of the planes is enabled. g4x isn't vlv/chv and
cxsr only works with the primary plane. Fix the check to examine the
bitmask of active planes rather than the number of bits set in said
bitmask.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-3-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

Be consistent in that active_planes bitmask fits in a u8.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-4-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

intel_plane_atomic_calc_changes() deals with both the old and
new crtc/plane states. Make the variable names reflect that
more clearly.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-2-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

Add helper function with returns if HDR mode in on
Signed-off-by: NTejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907113658.1351456-1-tejaskumarx.surendrakumar.upadhyay@intel.com
[vsyrjala: fix up alignment to match codingstyle]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

There's a new register pair for 128b/132b mode where you need to set the
pixel clock in Hz.

v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper

Bspec: 54128
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a2902cc188973f022f282f2a77e693afdecefb5a.1631191763.git.jani.nikula@intel.com

128b/132b has a separate transcoder DDI mode, which also requires the
MST transport select to be set. Note that we'll use DP MST also for
single-stream 128b/132b.

Having the FDI and 128b/132b modes share the register mode value
complicates things a bit.

v2:
- Use HAS_DP20 abstraction for 128b/132b mode (Ville)
- Use intel_dp_is_uhbr() helper

Bspec: 50493
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/279bfbd979e0256fae13a5231e07e2f4fb665c07.1631191763.git.jani.nikula@intel.com

Let's abstract the DP 2.0 feature. Initially just DG2.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3746e700641bc17eff270569387fe869707d92ed.1631191763.git.jani.nikula@intel.com

Set the DP 2.0 128b/132b channel encoding for UHBR rates.

v2: Fix UHBR port clock check, use intel_dp_is_uhbr()

Bspec: 54128
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c88b08d80a96d1229ae941b296590633be4d8711.1631191763.git.jani.nikula@intel.com

UHBR rates and 128b/132b channel encoding go hand in hand.

v2: Fix check for >= UHBR rates using intel_dp_is_uhbr() (Ville)
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4ffd0187b306c0abaa08b89ed35c993ad8145c7.1631191763.git.jani.nikula@intel.com

128b/132b channel encoding has separate TPS1 and TPS2, although the DPCD
register values coincide with 8b/10b TPS1 and TPS2 values. Use 128b/132b
TPS2 for channel equalization.

v2: Use intel_dp_is_uhbr

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> # v1
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/723b29223dc570c8b63c3c6fe5fb772d9db06c0d.1631191763.git.jani.nikula@intel.com

Helpful abstraction to avoid duplication.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe9a222ad900da797c989de9f7fa13928d2c9861.1631191763.git.jani.nikula@intel.com

Unfortunately, the DP 2.0 128b/132b DDI mode selection in the register
conflicts with FDI. Since we have to deal with both meanings in the same
code, for different platforms, clarify the macro name so we don't
forget.

Bspec: 50493
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/260e4da302d47ae50122eb8d517be6ac3ccb15f2.1631191763.git.jani.nikula@intel.com

The DP 2.0 128b/132b channel coding uses TX FFE presets instead of
vswing and pre-emphasis.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ba129c51aeb01a5f210de7026abe704a554a178.1631191763.git.jani.nikula@intel.com

DP 2.0 brings some new DPCD addresses for PHY repeaters.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/def17e2329722f22c35807be26b35590ccb93bfd.1631191763.git.jani.nikula@intel.com

Extend the use of extended receiver cap at 0x2200 to cover
MAIN_LINK_CHANNEL_CODING_CAP in 0x2206, in case an implementation hides
the DP 2.0 128b/132b channel encoding cap.

v2: Extend to DP_RECEIVER_CAP_SIZE (Ville)

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/649051cb896821147feee91aab1f2abc523c1353.1631191763.git.jani.nikula@intel.com

The bw code equals link_rate / 0.27 Gbps only for 8b/10b link
rates. Handle DP 2.0 UHBR rates as special cases, though this is not
pretty.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cab4edda8834d6b4db610fabb5e1f1f18ae33c2c.1631191763.git.jani.nikula@intel.com

Wa_16014451276 fixes the starting coordinate for PSR2 selective
updates. CHICKEN_TRANS definition of the workaround bit has a wrong
name based on workaround definition and HSD.

Wa_14014971508 allows the screen to continue to be updated when
coming back from DC5/DC6 and SF_SINGLE_FULL_FRAME bit is not kept
set in PSR2_MAN_TRK_CTL.

Wa_16012604467 fixes underruns when exiting PSR2 when it is in one
of its internal states.

Wa_14014971508 is still in pending status in BSpec but by
the time this is reviewed and ready to be merged it will be finalized.

v2:
- renamed register to ADLP_1_BASED_X_GRANULARITY
- added comment about all ADL-P supported panels being 1 based X
granularity

BSpec: 54369
BSpec: 50054
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-5-jose.souza@intel.com

drm_atomic_helper_damage_iter_init() + drm_atomic_for_each_plane_damage()
returns the full plane area in case no damaged area was set by
userspace or it was discarted by driver.

This is important to fix the rendering of userspace applications that
does frontbuffer rendering and notify driver about dirty areas but do
not set any dirty clips.

With this we don't need to worry about to check and mark the whole
area as damaged in page flips.

Another important change here is the move of
drm_atomic_add_affected_planes() call, it needs to called late
otherwise the area of all the planes would be added to pipe_clip and
not saving power.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-4-jose.souza@intel.com

Not sure why but when moving the cursor fast it causes some artifacts
of the cursor to be left in the cursor path, adding some pixels above
the cursor to the damaged area fixes the issue, so leaving this as a
workaround until proper fix is found.

This is reproducile on TGL and ADL-P.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-3-jose.souza@intel.com

BSpec states that the minimum number of frames before selective update
is 2, so making sure this minimum limit is fulfilled.

BSpec: 50422
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-2-jose.souza@intel.com

As the SU_REGION_START begins at 0, the SU_REGION_END should be number
of lines - 1.

BSpec: 50424
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-1-jose.souza@intel.com

The release notes mentions that this version-
1. Fix for unblock indication to punit.
2. Robustness fix for DC6/6v abort scenarios.

Cc: Imre Deak <Imre Deak <imre.deak@intel.com>>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914215732.67135-2-anusha.srivatsa@intel.com

Free all the DMC payloads, not just DMC_MAIN.

unreferenced object 0xffff88ff32d4d800 (size 1024):
  comm "kworker/1:5", pid 701, jiffies 4294904239 (age 109.736s)
  hex dump (first 32 bytes):
    40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00  @@..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915]
    [<000000001049fcab>] process_one_work+0x261/0x550
    [<00000000eeb995ac>] worker_thread+0x49/0x3c0
    [<0000000021031dc3>] kthread+0x10b/0x140
    [<000000004a0f69ee>] ret_from_fork+0x1f/0x30
unreferenced object 0xffff88ff0bde4000 (size 1024):
  comm "kworker/0:3", pid 708, jiffies 4294904469 (age 108.816s)
  hex dump (first 32 bytes):
    40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00  @@..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915]
    [<000000001049fcab>] process_one_work+0x261/0x550
    [<00000000eeb995ac>] worker_thread+0x49/0x3c0
    [<0000000021031dc3>] kthread+0x10b/0x140
    [<000000004a0f69ee>] ret_from_fork+0x1f/0x30

Fixes: 3d5928a1 ("drm/i915/xelpd: Pipe A DMC plugging")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809194805.3793060-1-lucas.demarchi@intel.com

Earlier while calculating derated bw we would use 90% of the calculated
bw. Starting ADL-P we use a non standard derating. Updating the formulae
to reflect the same.

Bspec: 64631

v2: Use the new derating value only for ADL-P(MattR)

Fixes: 4d32fe2f ("drm/i915/adl_p: Update memory bandwidth parameters")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com

Extract the "panel transcoder" bitmask into a helper. We'll
have a couple of uses for this later.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-9-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Pass the crtc+cpu_transcoder rather than the crtc state to
intel_dsc_power_domain(). This should allow us to reuse it
during readout as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-8-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Add the _if_enabled() counterpart to with_intel_display_power().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-7-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder.
Bigjoiner is making life even more confusing by introducing
a N:1 relationship between pipes and transcoders. In that case
we only enable/configure the transcoder corresponding to the
master pipe. Let's do some renames to make it clear we're dealing
with the transcoder rather than pipe when it comes to
PIPECONF/TRANSCONF.

I decided to leave the _cpu_ part out from the function/macro
names since the PCH transcoder related stuff already has a
_pch_ in their name. So shouldn't be possible to confuse them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

hsw_crtc_compute_clock() has become spaghetti. Flatten
it a bit to make it at least semi-legible.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-5-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Suck the "do we need bigjoiner?" checks into a helper instead of
duplicating them in two differentt places.

v2: s/use/need/ (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-4-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

New DG1 PCI id.

BSpec: 44463
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913181909.35237-1-jose.souza@intel.com

Now that we have MSO pixel overlap in display info, use it.
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87d8d80ba205eb2ecb50f613219e0a821a842616.1630419362.git.jani.nikula@intel.com

MSO will require segment pixel overlap information from the
EDID. Postpone MSO init until after we've read and cached the EDID.
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a360fca01be0f971337b3635f4e4752922ffebe.1630419362.git.jani.nikula@intel.com

The VESA Organization Vendor-Specific Data Block, defined in VESA
DisplayID Standard v2.0, specifies the eDP Multi-SST Operation (MSO)
stream count and segment pixel overlap.

DisplayID v1.3 has Appendix B: DisplayID as an EDID Extension,
describing how DisplayID sections may be embedded in EDID extension
blocks. DisplayID v2.0 does not have such a section, perhaps implying
that DisplayID v2.0 data should not be included in EDID extensions, but
rather in a "pure" DisplayID structure at its own DDC address pair
A4h/A5h, as described in VESA E-DDC Standard v1.3 chapter 3.

However, in practice, displays out in the field have embedded DisplayID
v2.0 data blocks in EDID extensions, including, in particular, some eDP
MSO displays, where a pure DisplayID structure is not available at all.

Parse the MSO data from the DisplayID data block. Do it as part of
drm_add_display_info(), extending it to parse also DisplayID data to
avoid requiring extra calls to update the information.

v2: Check for VESA OUI (Ville)
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Acked-by: NMaxime Ripard <maxime@cerno.tech>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73ca2887e7b37880690f5c9ba4594c9cd1170669.1630419362.git.jani.nikula@intel.com

Replace the open coded OUI conversion from three bytes to a 24-bit int,
as we'll be adding one more user shortly. No functional changes.

Side note: CTA-861 format has the OUI bytes in reverse order.
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Acked-by: NMaxime Ripard <maxime@cerno.tech>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2f43032d5f001510c7eed059321ceeb76d07a606.1630419362.git.jani.nikula@intel.com