There is substantial latency in generation and handling of PPS events
from the NIC, which we have to correct for before passing a host
timestamp to the PPS subsystem.  We compare clocks with the MC,
giving us two offsets to subtract from the timestamp generated by
pps_get_ts():

(a) Time from the last good sync (where we got host and NIC timestamps
    for nearly the same instant) to the time we called pps_get_ts()
(b) Time from NIC top of second to the last good sync

We currently calculate (a) + (b) in a quite confusing way.
Instead, calculate (a) completely, then add (b) to it.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use conventional net_ratelimit() instead.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix for init time stack trace occuring in
alx_get_stats64 upon start up. Should have been part of
commit adding the spinlock:
f1b6b106 alx: add alx_get_stats64 operation
Signed-off-by: NJohn Greene <jogreene@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove occurrences of unused struct __vxge_hw_device pointer in functions
vxge_learn_mac() and vxge_rem_isr().

Detected by Coverity: CID 139839, CID 139842.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unused network device private data pointer 'vp' in function
vortex_eisa_cleanup(). Detected by Coverity: CID 139826.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit ee45fd92 ("sfc: Use TX PIO
for sufficiently small packets") introduced the following warning:

drivers/net/ethernet/sfc/tx.c: In function 'efx_enqueue_skb':
drivers/net/ethernet/sfc/tx.c:432:1: warning: label 'finish_packet' defined but not used

Stick the label inside the same #ifdef that the code which calls
it uses.  Note that this is only seen for arch that do not set
ARCH_HAS_IOREMAP_WC, such as arm, mips, sparc, ..., as the others
enable the write combining code and hence use the label.

Cc: Jon Cooper <jcooper@solarflare.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnx2x driver uses incorrect PF identifier to configure (in HW) the VF
interrupt scheme; As a result, in multi-function mode the configuration
for PFs with a high index (4+) will overflow and the PF will erroneously
configure a single ISR scheme for its VFs.
As a result, if such a VF uses multiple queues, interrupt generation will
stop after VF receives an Rx packet or sends a Tx packet on a queue
other than queue[0].
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quoting David Vrabel -
"5780 cards cannot have jumbo frames and TSO enabled together.  When
jumbo frames are enabled by setting the MTU, the TSO feature must be
cleared.  This is done indirectly by calling netdev_update_features()
which will call tg3_fix_features() to actually clear the flags.

netdev_update_features() will also trigger a new netlink message for the
feature change event which will result in a call to tg3_get_stats64()
which deadlocks on the tg3 lock."

tg3_set_mtu() does not need to be under the tg3 lock since converting
the flags to use set_bit(). Move it out to after tg3_netif_stop().
Reported-by: NDavid Vrabel <david.vrabel@citrix.com>
Tested-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the original code, if tg3_readphy() fails then it does an unnecessary
check to verify "err" is still zero and then returns -EBUSY.

My static checker complains about the unnecessary "if (!err)" check and
anyway it is better to propagate the -EBUSY error code from
tg3_readphy() instead of hard coding it here.  And really the original
code is confusing to look at.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Occasionally users want to know what parameters their Broadcom drivers
are running with. For example, a user may want to know if MSI is
disabled.

This patch has been compile tested.
Signed-off-by: NJames M Leddy <james.leddy@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Allwinner A10 compatibles were following a slightly different compatible
patterns than the rest of the SoCs for historical reasons. Add compatibles
matching the other pattern to the ethernet driver for consistency, and keep the
older one for backward compatibility.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When configuring GRE tunnel using OVS, tcp stream is distributed over
all RSS queues which may cause TCP reordering. It happens since OVS
uses L2GRE protocol when kernel gre uses IPGRE.
Patch defaults gre tunnel to L2GRE which allows proper RSS for L2GRE
packets and (implicitly) disables RSS for IPGRE traffic.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MII management bus clock is derived from the MAC clock by dividing it by
MIIMODER register CLKDIV field value. This value may need to be set up
in case it is undefined or its default value is too high (and
communication with PHY is too slow) or too low (and communication with
PHY is impossible). The value of CLKDIV is not specified directly, but
is derived from the MAC clock for the default MII management bus frequency
of 2.5MHz. The MAC clock may be specified in the platform data, or in
the 'clocks' device tree attribute.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OpenCores 10/100 Mbps MAC does not support speeds above 100 Mbps, but does
not disable advertisement when PHY supports them. This results in
non-functioning network when the MAC is connected to a gigabit PHY connected
to a gigabit switch.

The fix is to disable gigabit speed advertisement on attached PHY
unconditionally.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TX and RX rings share memory and descriptors. Maximal number of
descriptors reported is one less than the total available nuber of
descriptors. For the set operation the requested number of TX descriptors
is rounded down to the nearest power of two (driver logic requirement).
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following methods are implemented:
- get link state (standard implementation);
- get timestamping info (standard implementation).
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In https://bugzilla.redhat.com/show_bug.cgi?id=994438 and
https://bugzilla.redhat.com/show_bug.cgi?id=970480  we
received different reports of e100 throwing the following
warning:

 [<c06a0ba5>] ? pci_disable_device+0x85/0x90
 [<c044a153>] warn_slowpath_fmt+0x33/0x40
 [<c06a0ba5>] pci_disable_device+0x85/0x90
 [<f7fdf7e0>] __e100_shutdown+0x80/0x120 [e100]
 [<c0476ca5>] ? check_preempt_curr+0x65/0x90
 [<f7fdf8d6>] e100_suspend+0x16/0x30 [e100]
 [<c06a1ebb>] pci_legacy_suspend+0x2b/0xb0
 [<c098fc0f>] ? wait_for_completion+0x1f/0xd0
 [<c06a2d50>] ? pci_pm_poweroff+0xb0/0xb0
 [<c06a2de4>] pci_pm_freeze+0x94/0xa0
 [<c0767bb7>] dpm_run_callback+0x37/0x80
 [<c076a204>] ? pm_wakeup_pending+0xc4/0x140
 [<c0767f12>] __device_suspend+0xb2/0x1f0
 [<c076806f>] async_suspend+0x1f/0x90
 [<c04706e5>] async_run_entry_fn+0x35/0x140
 [<c0478aef>] ? wake_up_process+0x1f/0x40
 [<c0464495>] process_one_work+0x115/0x370
 [<c0462645>] ? start_worker+0x25/0x30
 [<c0464dc5>] ? manage_workers.isra.27+0x1a5/0x250
 [<c0464f6e>] worker_thread+0xfe/0x330
 [<c0464e70>] ? manage_workers.isra.27+0x250/0x250
 [<c046a224>] kthread+0x94/0xa0
 [<c0997f37>] ret_from_kernel_thread+0x1b/0x28
 [<c046a190>] ? insert_kthread_work+0x30/0x30

This patch removes pci_disable_device() from __e100_shutdown().
pci_clear_master() is enough.
Signed-off-by: NMichele Baldessari <michele@acksyn.org>
Tested-by: NMark Harig <idirectscm@aim.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the GPIO bitbang MDIO driver is used instead of the Davinci MDIO driver
we need to configure the phy_id string differently. Otherwise this string
looks like this "gpio.6" instead of "gpio-0" and the PHY is not found when
phy_connect() is called.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Lukas Stockmann <lukas.stockmann@siemens.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When user tried to change generic options using "ethtool -s" command, while SFP
module is plugged out or during module detection, the command would have failed
with "Unsupported port type" message. The fix is to ignore the port option in
case it's same as the current port configuration.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver was returning from link event handler without
setting linkup variable
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o __qlcnic_down call's netif_tx_disable which in turn stops
  all the TX queues, corresponding start queue was missing in
  __qlcnic_up which was leading to tx timeout.
o The commit b84caae4
  (qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.)
  exposed this issue.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Do not re-initialize vlan list in case of adapter reset.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Bound checks should be >= instead of > for number of receive descriptors
  and number of receive rings.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Indentation mismatch spotted with Coverity.
Introduced in 4e3b35b0 ("i40e: add DCB and DCBNL support")
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is race condition when call netif_napi_add() after
register_netdevice(), as ->open() can be called without napi initialized
and trigger BUG_ON() on napi_enable(), like on below messages:

[    9.699863] sky2: driver version 1.30
[    9.699960] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    9.700020] sky2 0000:02:00.0: irq 45 for MSI/MSI-X
[    9.700498] ------------[ cut here ]------------
[    9.703391] kernel BUG at include/linux/netdevice.h:501!
[    9.703391] invalid opcode: 0000 [#1] PREEMPT SMP
<snip>
[    9.830018] Call Trace:
[    9.830018]  [<fa996169>] sky2_open+0x309/0x360 [sky2]
[    9.830018]  [<c1007210>] ? via_no_dac+0x40/0x40
[    9.830018]  [<c1007210>] ? via_no_dac+0x40/0x40
[    9.830018]  [<c135ed4b>] __dev_open+0x9b/0x120
[    9.830018]  [<c1431cbe>] ? _raw_spin_unlock_bh+0x1e/0x20
[    9.830018]  [<c135efd9>] __dev_change_flags+0x89/0x150
[    9.830018]  [<c135f148>] dev_change_flags+0x18/0x50
[    9.830018]  [<c13bb8e0>] devinet_ioctl+0x5d0/0x6e0
[    9.830018]  [<c13bcced>] inet_ioctl+0x6d/0xa0

To fix the problem patch changes the order of initialization.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=67151

Reported-and-tested-by: ebrahim.azarisooreh@gmail.com
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Submission d9aee591 "bnx2x: Don't release PCI bars on shutdown" separated
the PCI remove and shutdown flows, but pci_disable_device() is still
being called on both.
As a result, a dev_WARN_ONCE will be hit during shutdown for every bnx2x
VF probed on a hypervisor (as its shutdown callback will be called and later
pci_disable_sriov() will call its remove callback).

This calls the pci_disable_device() only on the remove flow.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Logging the MAC address on every if-up, is not really useful, and annoying when
there is no cable inserted and NetworkManager tries the ifup every 50 seconds.

Also change the log level from warning to info, as that is what it is.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Logging a PTP error on hw which simply does not support PTP is not very
useful. Moreover this message gets logged on every if-up, and if there is
no cable inserted NetworkManager will re-try the ifup every 50 seconds.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/8390/apne.c: In function ‘apne_probe1’:
drivers/net/ethernet/8390/apne.c:215: warning: unused variable ‘ei_local’

Introduced by commit c45f812f ("8390 :
Replace ei_debug with msg_enable/NETIF_MSG_* feature"), which added the
variable without using it.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The adapter is freed before we check its flags. It was caused
by commit 144be3d9 ("net/cxgb4: Avoid disabling PCI device for
towice"). The problem was reported by Intel's "0-day" tool.

The patch fixes it to avoid reverting commit 144be3d9.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Refactored MSI-x vector calculation for All adapters.
  Decoupled logic in the code which was using same call to
  request MSI-x vectors in default driver load, as well as
  during set_channel() operation for TSS/RSS. This refactoring
  simplifies code for TSS/RSS code path as well as probe path
  of the driver load for all adapters.
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Refactor configuration of interrupt coalescing parameters for
  all supported adapters.
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for MSI/MSI-X mode in poll controller routine.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Added hardware ops for interrupt enable/disable functions
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Dump each Tx queue details with all descriptors, queue indices
  and Tx queue stats to imporve data colletion in situations
  where Tx timeout occurs.
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Use boolean type instead of u8.
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>