Will need to use it for PCI root bridge hotplug support, so rename
*acpiphp* to *acpi* and move to osc.c.  Also make kacpi_hotplug_wq static
after that.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org

According to device model documentation, the way to create/destroy PCI
devices should be symmetric.  The rule is to either use
  1) device_register()/device_unregister()
or
  2) device_initialize()/device_add()/device_del()/put_device().

So change PCI core logic to follow the rule and get rid of the redundant
pci_dev_get()/pci_dev_put() pair.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Function pci_get_dev_by_id() takes a reference on the pci_dev returned, so
pci_dev_present() should release the corresponding reference.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Otherwise irq_desc for PCI bridge with hot-added IOAPIC may not be
allocated on the local node.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We can stop trying according to try_number now and do not need to use
root_bus checking as stop sign.

In extreme case we could need to reallocate resource for device just
under root bus.  For PCI root bus hot-add, we need to retry to assign
resources to PCI devices just under pci root bus.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When system support hotplug bridge with children hotplug slots, we need
to make sure that parent bridge get preallocated resource so later when
device is plugged into children slot, those children devices will get
resource allocated.

We do not meet this problem, because for PCIe hotplug card, when acpiphp
is used, pci_scan_bridge will set that for us when detect hotplug bit in
slot cap.
Reported-and-tested-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge branch 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into pci/acpi-scan2

* 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead
  ACPI: update ej_event interface to take acpi_device
  ACPI / scan: Add second pass to acpi_bus_trim()
  ACPI / scan: Change the implementation of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_device_unregister()
  ACPI: Remove the ops field from struct acpi_device
  ACPI: remove unused acpi_op_bind and acpi_op_unbind
  ACPI / scan: Fix check of device_attach() return value.

The only difference between acpi_bus_scan() and acpi_bus_add() is the
invocation of acpi_update_all_gpes() in the latter which in fact is
unnecessary, because acpi_update_all_gpes() has already been called
by acpi_scan_init() and the way it is implemented guarantees the next
invocations of it to do nothing.

For this reason, drop acpi_bus_add() and make all its callers use
acpi_bus_scan() directly instead of it.  Additionally, rearrange the
code in acpi_scan_init() slightly to improve the visibility of the
acpi_update_all_gpes() call in there.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>

Should use acpi_device pointer directly instead of use handle and
get the device pointer again later.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Make acpi_bus_trim() work in analogy with acpi_bus_scan() and carry
out two passes such that ACPI drivers will be detached from device
nodes being removed in the first pass and the device nodes themselves
will be removed in the second pass.

For this purpose split the driver unregistration out of
acpi_bus_remove() into a new routine, acpi_bus_device_detach(), that
will be executed by acpi_bus_trim() in the additional first pass as
a post-order callback.

This is necessary, because some ACPI drivers' .remove() routines
unregister struct device objects associated with the ACPI device
nodes being removed and that needs to happen while the ACPI
device nodes are still around (for example, in case they need to be
used for power management or similar things at that time).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

The current acpi_bus_trim() implementation is not really
straightforward and may be simplified significantly by using
acpi_walk_namespace() with acpi_bus_remove() as a post-order
callback.

Observe that acpi_bus_remove(), as called by acpi_bus_trim(), cannot
actually fail, because its first argument is guaranteed not to be
NULL thanks to the acpi_bus_get_device() check in acpi_bus_trim(),
so simply move the acpi_bus_get_device() check to acpi_bus_remove()
and use acpi_walk_namespace() to execute it for every device under
start->handle as a post-order callback.  The, run it directly for
start->handle itself.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

All callers of acpi_bus_trim() pass 1 (true) as the second argument
of it, so remove that argument entirely and change acpi_bus_trim()
to always behave as though it were 1.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

Drop the second argument of acpi_device_unregister(), type, which is
not used by that function.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

The ops field in struct acpi_device is not used anywhere, so remove
it.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

With commit f2a33cde55a03 "ACPI: Drop ACPI device .bind() and .unbind()
callbacks", acpi_op_bind and acpi_op_unbind are not used any more. So
remove them.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Since device_attach() returns 1 on success (a driver has been bound
to the device), the check against its return value in
acpi_bus_device_attach() should modified to take that into accout.
Make it so.

[rjw: Subject and changelog.]
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge branch 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into pci/yinghai-survey-resources+acpi-scan

* 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Treat power resources in a special way
  ACPI: Remove unused struct acpi_pci_root.id member
  ACPI: Drop ACPI device .bind() and .unbind() callbacks
  ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c
  ACPI / PCI: Rework the setup and cleanup of device wakeup
  ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type
  ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument
  ACPI: Replace ACPI device add_type field with a match_driver flag
  ACPI: Drop the second argument of acpi_bus_scan()
  ACPI: Remove the arguments of acpi_bus_add() that are not used
  ACPI: Remove acpi_start_single_object() and acpi_bus_start()
  ACPI / PCI: Fold acpi_pci_root_start() into acpi_pci_root_add()
  ACPI: Change the ordering of acpi_bus_check_add()
  ACPI: Replace struct acpi_bus_ops with enum type
  ACPI: Reduce the usage of struct acpi_bus_ops
  ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different
  ACPI: Change the ordering of PCI root bridge driver registrarion
  ACPI: Separate adding ACPI device objects from probing ACPI drivers

Conflicts:
	drivers/acpi/pci_root.c

During testing remove/rescan root bus 00, found
[  338.142574] bus: 'pci': really_probe: probing driver ata_piix with device 0000:00:01.1
[  338.146788] ata_piix 0000:00:01.1: device not available (can't reserve [io  0x01f0-0x01f7])
[  338.150565] ata_piix: probe of 0000:00:01.1 failed with error -22

because that fixed resource is not claimed.
For bootint path it is claimed in  from
        arch/x86/pci/i386.c::pcibios_allocate_resources()

Claim those resources, so on the remove/rescan will still use old
resources.

It is some kind honoring FW setting in the registers during hot add.
esp root-bus hot add is through acpi, BIOS has chance to set some registers
before handing over.

[bhelgaas: move weak definition to patch that uses it]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Firmware may have assigned PCI BARs for hot-added devices, so reserve
those resources before trying to allocate more.

[bhelgaas: move empty weak definition here]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The PCI resource allocation functions will be used for hot-added
devices, so keep them around.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The BIOS doesn't assign BAR values for hot-added devices, so don't
bother saving the original values when we enumerate these devices.

[bhelgaas: changelog, return constant 0 in pcibios_retrieve_fw_addr]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Factor pcibios_allocate_rom_resources() and
pcibios_allocate_dev_rom_resource() out of pcibios_assign_resources().
This will allow us to allocate ROM resources for hot-added root buses.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Previously pcibios_allocate_resources() allocated resources at boot-time
for all PCI devices using for_each_pci_dev().  This patch changes
pcibios_allocate_resources() so we can specify a bus, so we can do
similar allocation when hot-adding a root bus.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Factor pcibios_allocate_dev_resources() out of
pcibios_allocate_resources().  Currently we only allocate these
resources at boot-time with a for_each_pci_dev() loop.  Eventually
we'll use pcibios_allocate_dev_resources() for hot-added devices, too.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Commit 805d410f (ACPI: Separate adding ACPI device objects from
probing ACPI drivers) introduced an ACPI power resources management
regression, because it didn't ensure that the power resources
driver bind to the struct acpi_device objects corresponding
to power resources as soon as they were created.  As a result,
ACPI power management routines may attempt to access power resource
objects before they are ready to use.

To fix this problem, tell the acpi_add_single_object() in
acpi_bus_check_add() to probe the driver for objects of type
ACPI_BUS_TYPE_POWER.  This fix has been verified to work on
HP nx6325 where the problem was first observed.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Thus pcibios_allocate_bus_resources() could more simple and clean.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This member is never initialized and never referenced, so remove it.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Drop the .bind() and .unbind() that have no more users from
struct acpi_device_ops and remove all of the code referring to
them from drivers/acpi/scan.c.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Move the code related to _PRT setup and removal and to power
resources from acpi_pci_bind() and acpi_pci_unbind() to the .setup()
and .cleanup() callbacks in acpi_pci_bus and remove acpi_pci_bind()
and acpi_pci_unbind() that have no purpose any more.  Accordingly,
remove the code related to device .bind() and .unbind() operations
from the ACPI PCI root bridge driver.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Currently, the ACPI wakeup capability of PCI devices is set up
in two different places, partially in acpi_pci_bind() where
runtime wakeup is initialized and partially in
platform_pci_wakeup_init(), where system wakeup is initialized.
The cleanup is only done in acpi_pci_unbind() and it only covers
runtime wakeup.

Use the new .setup() and .cleanup() callbacks in struct acpi_bus_type
to consolidate that code and do the setup and the cleanup each in one
place.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Add two new callbacks,.setup() and .cleanup(), struct acpi_bus_type
and modify acpi_platform_notify() to call .setup() after executing
acpi_bind_one() successfully and acpi_platform_notify_remove() to
call .cleanup() before running acpi_unbind_one().  This will allow
the users of struct acpi_bus_type, PCI in particular, to specify
operations to be executed right after the given device has been
associated with a companion struct acpi_device and right before
it's going to be detached from that companion, respectively.

The main motivation is to be able to get rid of acpi_pci_bind()
and acpi_pci_unbind(), which are horrible horrible stuff.  [In short,
there are three problems with them: The way they populate the .bind()
and .unbind() callbacks of ACPI devices is rather less than
straightforward, they require special hotplug-specific paths to be
present in the ACPI namespace scanning code and by the time
acpi_pci_unbind() is called the PCI device object in question may
not exist any more.]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

The callers of acpi_bus_add() usually assume that if it has
succeeded, then a struct acpi_device object has been attached to
the handle passed as the first argument.  Unfortunately, however,
this assumption is wrong, because acpi_bus_scan(), and acpi_bus_add()
too as a result, may return a pointer to a different struct
acpi_device object on success (it may be an object corresponding to
one of the descendant ACPI nodes in the namespace scope below that
handle).

For this reason, the callers of acpi_bus_add() who care about
whether or not a struct acpi_device object has been created for
its first argument need to check that using acpi_bus_get_device()
anyway, so the second argument of acpi_bus_add() is not really
useful for them.  The same observation applies to acpi_bus_scan()
executed directly from acpi_scan_init().

Therefore modify the relevant callers of acpi_bus_add() to check the
existence of the struct acpi_device in question with the help of
acpi_bus_get_device() and drop the no longer necessary second
argument of acpi_bus_add().  Accordingly, modify acpi_scan_init() to
use acpi_bus_get_device() to get acpi_root and drop the no longer
needed second argument of acpi_bus_scan().
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

After the removal of the second argument of acpi_bus_scan() there is
no difference between the ACPI_BUS_ADD_MATCH and ACPI_BUS_ADD_START
add types, so the add_type field in struct acpi_device may be
replaced with a single flag.  Do that calling the flag match_driver.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

After the removal of acpi_start_single_object() and acpi_bus_start()
the second argument of acpi_bus_scan() is not necessary any more,
so drop it and update acpi_bus_check_add() accordingly.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Notice that acpi_bus_add() uses only 2 of its 4 arguments and
redefine its header to match the body.  Update all of its callers as
necessary and observe that this leads to quite a number of removed
lines of code (Linus will like that).

Add a kerneldoc comment documenting acpi_bus_add() and wonder how
its callers make wrong assumptions about the second argument (make
note to self to take care of that later).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

The ACPI PCI root bridge driver was the only ACPI driver implementing
the .start() callback, which isn't used by any ACPI drivers any more
now.

For this reason, acpi_start_single_object() has no purpose any more,
so remove it and all references to it.  Also remove
acpi_bus_start_device(), whose only purpose was to call
acpi_start_single_object().

Moreover, since after the removal of acpi_bus_start_device() the
only purpose of acpi_bus_start() remains to call
acpi_update_all_gpes(), move that into acpi_bus_add() and drop
acpi_bus_start() too, remove its header from acpi_bus.h and
update all of its former users accordingly.

This change was previously proposed in a different from by
Yinghai Lu.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Move the code from the ACPI PCI root bridge's .start() callback
routine, acpi_pci_root_start(), directly into acpi_pci_root_add()
and drop acpi_pci_root_start().

It is safe to do that, because it is now always guaranteed that
when struct pci_dev objects are created, their companion struct
acpi_device objects are already present, so it is not necessary to
wait for them to be created before calling pci_bus_add_devices().

This change was previously proposed in a different form by
Yinghai Lu.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

If acpi_bus_check_add() is called for a handle already having an
existing struct acpi_device object attached, it is not necessary to
check the type and status of the device correspondig to it, so
change the ordering of acpi_bus_check_add() to avoid that.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Notice that one member of struct acpi_bus_ops, acpi_op_add, is not
used anywhere any more and the relationship between its remaining
members, acpi_op_match and acpi_op_start, is such that it doesn't
make sense to set the latter without setting the former at the same
time.  Therefore, replace struct acpi_bus_ops with new a enum type,
enum acpi_bus_add_type, with three values, ACPI_BUS_ADD_BASIC,
ACPI_BUS_ADD_MATCH, ACPI_BUS_ADD_START, corresponding to
both acpi_op_match and acpi_op_start unset, acpi_op_match set and
acpi_op_start unset, and both acpi_op_match and acpi_op_start set,
respectively.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

Objects of type struct acpi_bus_ops are currently used to pass
information between different parts of the ACPI namespace scanning
code, sometimes in quite convoluted ways.  It turns out that that
is not necessary in some cases, so simplify the code by reducing
the utilization of struct acpi_bus_ops objects where clearly
possible.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>