- 23 6月, 2020 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To differentiate from libperf's 'struct perf_evlist' methods. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
To differentiate from libperf's 'struct perf_evlist' methods. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 6月, 2020 1 次提交
-
-
由 Gaurav Singh 提交于
The 'evname' variable can be NULL, as it is checked a few lines back, check it before using. Fixes: 9e207ddf ("perf report: Show call graph from reference events") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/Signed-off-by: NGaurav Singh <gaurav1086@gmail.com>
-
- 02 6月, 2020 1 次提交
-
-
由 Tiezhu Yang 提交于
There exists some duplicated includes in tools/perf, remove them. Signed-off-by: NTiezhu Yang <yangtiezhu@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: xuefeng li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1591071304-19338-2-git-send-email-yangtiezhu@loongson.cnSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 5月, 2020 2 次提交
-
-
由 Jiri Olsa 提交于
Callchains are automatically initialized by checking on event's sample_type. For pipe mode we need to put this check into attr event code. Moving the callchains setup code into callchain_param_setup function and calling it from attr event process code. This enables pipe output having callchains, like: # perf record -g -e 'raw_syscalls:sys_enter' true | perf script # perf record -g -e 'raw_syscalls:sys_enter' true | perf report Committer notes: We still need the next patch for the above output to work. Reported-by: NPaul Khuong <pvk@pvk.ca> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200507095024.2789147-5-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 5月, 2020 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
As they are 'struct evsel' methods or related routines, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Adrian Hunter 提交于
There is an existing option to synthesize branch stacks for synthesized events. Add a new option to synthesize branch stacks for regular events. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200429150751.12570-5-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 4月, 2020 1 次提交
-
-
由 Zou Wei 提交于
Fixes coccicheck warning: tools/perf/builtin-report.c:1403:2-34: WARNING: Assignment of 0/1 to bool variable Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NZou Wei <zou_wei@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1587904683-3510-1-git-send-email-zou_wei@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 4月, 2020 1 次提交
-
-
由 Kan Liang 提交于
With the LBR stitching approach, the reconstructed LBR call stack can break the HW limitation. However, it may reconstruct invalid call stacks in some cases, e.g. exception handing such as setjmp/longjmp. Also, it may impact the processing time especially when the number of samples with stitched LBRs are huge. Add an option to enable the approach. # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6K of event 'cycles' # Event count (approx.): 6492797701 # # Children Self Command Shared Object Symbol # ........ ........ ............... .................. # ................................. # 99.99% 99.99% tchain_edit tchain_edit [.] f43 | ---main f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 f16 f17 f18 f19 f20 f21 f22 f23 f24 f25 f26 f27 f28 f29 f30 f31 | --99.65%--f32 f33 f34 f35 f36 f37 f38 f39 f40 f41 f42 f43 Committer testing: $ perf record --call-graph lbr /wb/tchain_edit [ perf record: Woken up 23 times to write data ] [ perf record: Captured and wrote 5.578 MB perf.data (6839 samples) ] $ perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake $ Before: $ perf report --no-children --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6K of event 'cycles:u' # Event count (approx.): 6459523879 # # Overhead Command Shared Object Symbol # ........ ........... ................ ....................... # 99.95% tchain_edit tchain_edit [.] f43 | --99.92%--f43 f42 f41 f40 f39 f38 f37 f36 f35 f34 f33 f32 f31 f30 f29 f28 f27 f26 f25 f24 f23 f22 f21 f20 f19 f18 f17 f16 f15 f14 f13 f12 f11 0.03% tchain_edit tchain_edit [.] f42 0.01% tchain_edit tchain_edit [.] f41 0.00% tchain_edit tchain_edit [.] f31 0.00% tchain_edit ld-2.29.so [.] _dl_relocate_object 0.00% tchain_edit ld-2.29.so [.] memmove 0.00% tchain_edit [unknown] [k] 0xffffffff93a00b17 After: $ perf report --stitch-lbr --no-children --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6K of event 'cycles:u' # Event count (approx.): 6459496645 # # Overhead Command Shared Object Symbol # ........ ........... ................ ........................ # 99.97% tchain_edit tchain_edit [.] f43 | --99.93%--f43 f42 f41 f40 f39 f38 f37 f36 f35 f34 f33 f32 f31 f30 f29 f28 f27 f26 f25 f24 f23 f22 f21 f20 f19 f18 f17 f16 f15 f14 f13 f12 f11 f10 f9 f8 f7 f6 f5 f4 f3 f2 f1 main __libc_start_main 0.02% tchain_edit [unknown] [k] 0xffffffff93a00b17 0.01% tchain_edit tchain_edit [.] f31 0.00% tchain_edit ld-2.29.so [.] _dl_important_hwcaps Signed-off-by: NKan Liang <kan.liang@linux.intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-14-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 4月, 2020 1 次提交
-
-
由 Adrian Hunter 提交于
Currently, callchains can be synthesized only for synthesized events. Add an itrace option to synthesize callchains for regular events. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200401101613.6201-9-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 03 4月, 2020 1 次提交
-
-
由 Namhyung Kim 提交于
Implement basic functionality to support cgroup tracking. Each cgroup can be identified by inode number which can be read from userspace too. The actual cgroup processing will come in the later patch. Reported-by: Nkernel test robot <rong.a.chen@intel.com> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> [ fix perf test failure on sampling parsing ] Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-4-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 24 3月, 2020 2 次提交
-
-
由 Jin Yao 提交于
Sometimes we may need to reload the browser to update the output since some options are changed. This patch creates a new key K_RELOAD. Once the __cmd_report() returns K_RELOAD, it would repeat the whole process, such as, read samples from data file, sort the data and display in the browser. v5: --- 1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h. 2. Skip setup_sorting() in repeat path if last key is K_RELOAD. v4: --- Need to quit in perf_evsel_menu__run if key is K_RELOAD. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200220013616.19916-3-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
When performing "perf report --group", it shows the event group information together. By default, the output is sorted by the first event in group. It would be nice for user to select any event for sorting. This patch introduces a new option "--group-sort-idx" to sort the output by the event at the index n in event group. For example, Before: # perf report --group --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1, # Event count (approx.): 6451235635 # # Overhead Command Shared Object Symbol # ................................ ......... ....................... ................................... # 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce 1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check 0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt ... After: # perf report --group --stdio --group-sort-idx 3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1, # Event count (approx.): 6451235635 # # Overhead Command Shared Object Symbol # ................................ ......... ....................... ................................... # 92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1 0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle 3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515 0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns 1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7 0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se 0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick Now the output is sorted by the fourth event in group. v7: --- Rebase to latest perf/core, no other change. v4: --- 1. Update Documentation/perf-report.txt to mention '--group-sort-idx' support multiple groups with different amount of events and it should be used on grouped events. 2. Update __hpp__group_sort_idx(), just return when the idx is out of limit. 3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups. So now we don't need to use together with --group. v3: --- Refine the code in __hpp__group_sort_idx(). Before: for (i = 1; i < nr_members; i++) { if (i == idx) { ret = field_cmp(fields_a[i], fields_b[i]); if (ret) goto out; } } After: if (idx >= 1 && idx < nr_members) { ret = field_cmp(fields_a[idx], fields_b[idx]); if (ret) goto out; } Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200220013616.19916-2-yao.jin@linux.intel.com [ Renamed pair_fields_alloc() to hist_entry__new_pair() and combined decl + assignment of vars ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 3月, 2020 1 次提交
-
-
由 Jin Yao 提交于
Previously we could get the report of branch type statistics. For example: # perf record -j any,save_type ... # t perf report --stdio # # Branch Statistics: # COND_FWD: 40.6% COND_BWD: 4.1% CROSS_4K: 24.7% CROSS_2M: 12.3% COND: 44.7% UNCOND: 0.0% IND: 6.1% CALL: 24.5% RET: 24.7% But now for the recent perf, it can't report the branch type statistics. It's a regression issue caused by commit 40c39e30 ("perf report: Fix a no annotate browser displayed issue"), which only counts the branch type statistics for browser mode. This patch moves the branch_type_count() outside of ui__has_annotation() checking, then branch type statistics can work for stdio mode. Fixes: 40c39e30 ("perf report: Fix a no annotate browser displayed issue") Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200313134607.12873-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 3月, 2020 1 次提交
-
-
由 Jin Yao 提交于
Currently we use a predefined array to set the block info output formats, it's fixed and inflexible. This patch adds two parameters "block_hpps" and "nr_hpps" in block_info__create_report and other static functions, in order to let user decide which columns to report and with specified report ordering. It should be more flexible. Buffers will be allocated to contain the new fmts, of course, we need to release them before perf exits. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200202141655.32053-4-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 27 2月, 2020 1 次提交
-
-
由 Ravi Bangoria 提交于
perf default config set by user in [annotate] section is totally ignored by annotate code. Fix it. Before: $ ./perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true $ ./perf annotate shash │ unsigned h = 0; │ movl $0x0,-0xc(%rbp) │ while (*s) │ ↓ jmp 44 │ h = 65599 * h + *s++; 11.33 │24: mov -0xc(%rbp),%eax 43.50 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: │ movl $0x0,-0xc(%rbp) │ ↓ jmp 44 1 │1 24: mov -0xc(%rbp),%eax 4 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Note that we have removed show_nr_samples and show_total_period from annotation_options because they are not used. Instead of them we use symbol_conf.show_nr_samples and symbol_conf.show_total_period. Committer testing: Using 'perf annotate --stdio2' to use the TUI rendering but emitting the output to stdio: # perf config # # perf config annotate.hide_src_code=true # perf config annotate.hide_src_code=true # # perf config annotate.show_nr_jumps=true # perf config annotate.show_nr_samples=true # perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true # # Before: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Percent 00000000000609f0 <ObjectInstance::weak_pointer_was_finalized()@@base>: endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 100.00 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # After: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1 1b: xor %eax,%eax pop %rbp ← retq nop 1 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # # perf config annotate.show_nr_jumps annotate.show_nr_jumps=true # perf config annotate.show_nr_jumps=false # perf config annotate.show_nr_jumps annotate.show_nr_jumps=false # # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-6-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 1月, 2020 3 次提交
-
-
由 Jin Yao 提交于
Commit 800d3f56 ("perf report: Add warning when libunwind not compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for call chain unwinding and had no support for libunwind. So the warning "Please install libunwind development packages during the perf build." caused the confusion even if the call-graph is displayed correctly. This patch adds checking for HAVE_DWARF_SUPPORT, which is set when libdw-dwarf-unwind is compiled in. Fixes: 800d3f56 ("perf report: Add warning when libunwind not compiled in") Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NThomas Richter <tmricht@linux.ibm.com> Tested-by: NThomas Richter <tmricht@linux.ibm.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
The objdump utility has useful --prefix / --prefix-strip options to allow changing source code file names hardcoded into executables' debug info. Add options to 'perf report', 'perf top' and 'perf annotate', which are then passed to objdump. $ mkdir foo $ echo 'main() { for (;;); }' > foo/foo.c $ gcc -g foo/foo.c foo/foo.c:1:1: warning: return type defaults to ‘int’ [-Wimplicit-int] 1 | main() { for (;;); } | ^~~~ $ perf record ./a.out ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.230 MB perf.data (5721 samples) ] $ mv foo bar $ perf annotate <does not show source code> $ perf annotate --prefix=/home/ak/lsrc/git/bar --prefix-strip=5 <does show source code> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> LPU-Reference: 20200107210444.214071-1-andi@firstfloor.org Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Andi Kleen 提交于
Refer to --no-children, which is what most people probably want. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> LPU-Reference: 20200103183643.149150-1-andi@firstfloor.org Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 12月, 2019 1 次提交
-
-
由 Jin Yao 提交于
We observed an issue that was some extra columns displayed after switching perf data file in browser. The steps to reproduce: 1. perf record -a -e cycles,instructions -- sleep 3 2. perf report --group 3. In browser, we use hotkey 's' to switch to another perf.data 4. Now in browser, the extra columns 'Self' and 'Children' are displayed. The issue is setup_sorting() executed again after repeat path, so dimensions are added again. This patch checks the last key returned from __cmd_report(). If it's K_SWITCH_INPUT_DATA, skips the setup_sorting(). Fixes: ad0de097 ("perf report: Enable the runtime switching of perf data file") Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 12月, 2019 1 次提交
-
-
由 Ravi Bangoria 提交于
If perf.data is recorded without -d, don't allow user to use --mem-mode with 'perf report'. symbol_daddr and phys_daddr can be recorded separately and may be present in the perf.data but at the report time they are associated with mem-mode fields and thus this restriction applies to them as well. Before: $ perf record ls $ perf report --mem-mode --stdio # Overhead Local Weight Memory access Symbol # ........ ............ ............. ....................... 55.56% 0 N/A [k] 0xffffffff81a00ae7 After: $ perf report --mem-mode --stdio Error: Selected --mem-mode but no mem data. Did you call perf record without -d? Suggested-by: NArnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20191114132213.5419-4-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 26 11月, 2019 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
One more step on the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-69vcr8pubpym90skxhmbwhiw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
And pick the shortest name: 'struct maps'. The split existed because we used to have two groups of maps, one for functions and one for variables, but that only complicated things, sometimes we needed to figure out what was at some address and then had to first try it on the functions group and if that failed, fall back to the variables one. That split is long gone, so for quite a while we had only one struct maps per struct map_groups, simplify things by combining those structs. First patch is the minimum needed to merge both, follow up patches will rename 'thread->mg' to 'thread->maps', etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 11月, 2019 3 次提交
-
-
由 Jin Yao 提交于
This patch supports jumping from tui total cycles view to symbol source view. For example, perf record -b ./div perf report --total-cycles In total cycles view, we can select one entry and press 'a' or press ENTER key to jump to symbol source view. This patch also sets sort_order to NULL in cmd_report() which will use the default branch sort order. The percent value in new annotate view will be consistent with the percent in annotate view switched from perf report (we observed the original percent gap with previous patches). v2: --- Fix the 'make NO_SLANG=1' error. (set __maybe_unused to annotation_opts in block_hists_tui_browse()). Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191118140849.20714-2-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
And take it into account when looking up DSOs when we have the dso_id fields obtained from somewhere, like from PERF_RECORD_MMAP2 records. Instances of struct map pointing to the same DSO pathname but with anything in dso_id different are in fact different DSOs, so better have different 'struct dso' instances to reflect that. At some point we may want to get copies of the contents of the different objects if we want to do correct annotation or other analysis. With this we get 'struct map' 24 bytes leaner: $ pahole -C map ~/bin/perf struct map { union { struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */ struct list_head node; /* 0 16 */ } __attribute__((__aligned__(8))); /* 0 24 */ u64 start; /* 24 8 */ u64 end; /* 32 8 */ _Bool erange_warned:1; /* 40: 0 1 */ _Bool priv:1; /* 40: 1 1 */ /* XXX 6 bits hole, try to pack */ /* XXX 3 bytes hole, try to pack */ u32 prot; /* 44 4 */ u64 pgoff; /* 48 8 */ u64 reloc; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u64 (*map_ip)(struct map *, u64); /* 64 8 */ u64 (*unmap_ip)(struct map *, u64); /* 72 8 */ struct dso * dso; /* 80 8 */ refcount_t refcnt; /* 88 4 */ u32 flags; /* 92 4 */ /* size: 96, cachelines: 2, members: 13 */ /* sum members: 92, holes: 1, sum holes: 3 */ /* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */ /* forced alignments: 1 */ /* last cacheline: 32 bytes */ } __attribute__((__aligned__(8))); $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-g4hxxmraplo7wfjmk384mfsb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
And this patch highlights where these fields are being used: in the sort order where it uses it to compare maps and classify samples taking into account not just the DSO, but those DSO id fields. I think these should be used to differentiate DSOs with the same name but different 'struct dso_id' fields, i.e. these fields should move to 'struct dso' and then be used as part of the key when doing lookups for DSOs, in addition to the DSO name. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8v5isitqy0dup47nnwkpc80f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 11月, 2019 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
We are already passing things like: symbol__annotate(ms->sym, ms->map, ...) So shorten the signature of such functions to receive the 'map_symbol' pointer. This also paves the way to having the 'struct map_groups' pointer in the 'struct map_symbol' so that we can get rid of 'struct map'->groups. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-23yx8v1t41nzpkpi7rdrozww@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 07 11月, 2019 5 次提交
-
-
由 Jin Yao 提交于
Previous patch has implemented a new option "--total-cycles". But only stdio mode is supported. This patch supports the tui mode and support '--percent-limit'. For example, perf record -b ./div perf report --total-cycles --percent-limit 1 # Samples: 2753248 of event 'cycles' Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object 26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div 15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so 5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div 4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so 4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div 3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div 3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so 3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so 2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so 2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so 2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so 2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div 1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so 1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div 1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so -------------------------------------------------- v7: --- 1. Since we have used use_browser in report__browse_block_hists to support stdio mode, now we also add supporting for tui. 2. Move block tui browser code from ui/browsers/hists.c to block-info.c. v6: --- Create report__tui_browse_block_hists in block-info.c (codes are moved from builtin-report.c). v5: --- Fix a crash issue when running perf report without '--total-cycles'. The issue is because the internal flag is renamed from 'total_cycles' to 'total_cycles_mode' in previous patch but this patch still uses 'total_cycles' to check if the '--total-cycles' option is enabled, which causes the code to be inconsistent. v4: --- Since the block collection is moved out of printing in previous patch, this patch is updated accordingly for tui supporting. v3: --- Minor change since the function name is changed: block_total_cycles_percent -> block_info__total_cycles_percent Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-8-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
We have already supported the '--total-cycles' option in previous patch. It's also useful to show entries only above a threshold percent. This patch enables '--percent-limit' for not showing entries under that percent. For example: perf report --total-cycles --stdio --percent-limit 1 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 2M of event 'cycles' # Event count (approx.): 2753248 # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ................................................................. .................... # 26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div 15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so 5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div 4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so 4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div 3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div 3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so 3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so 2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so 2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so 2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so 2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div 1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so 1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div 1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so Committer testing: From second exapmple onwards slightly edited for brevity: # perf report --total-cycles --percent-limit 2 --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6M of event 'cycles' # Event count (approx.): 6299936 # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ...................................................................... .................... # 2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux] # # (Tip: Create an archive with symtabs to analyse on other machine: perf archive) # # perf report --total-cycles --percent-limit 1 --stdio # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object 2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux] 1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so # # perf report --total-cycles --percent-limit 0.7 --stdio # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object 2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux] 1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so 0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux] # ------------------------------------------- It only shows the entries which 'Sampled Cycles%' > 1%. v7: --- No functional change. Only fix the conflict issue because previous patches are changed. v6: --- No functional change. Only fix the conflict issue because previous patches are changed. v5: --- No functional change. Only fix the conflict issue because previous patches are changed. v4: --- No functional change. Only fix the build issue because previous patches are changed. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-7-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
It would be useful to support sorting for all blocks by the sampled cycles percent per block. This is useful to concentrate on the globally hottest blocks. This patch implements a new option "--total-cycles" which sorts all blocks by 'Sampled Cycles%'. The 'Sampled Cycles%' is the percent: percent = block sampled cycles aggregation / total sampled cycles Note that, this patch only supports "--stdio" mode. For example, # perf record -b ./div # perf report --total-cycles --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 2M of event 'cycles' # Event count (approx.): 2753248 # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ................................................ ................. # 26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div 15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so 5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div 4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so 4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div 3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div 3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so 3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so 2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so 2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so 2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so 2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so 2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div 1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so 1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div 1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so 0.25% 182.5K 0.02% 1 [random_r.c:388 -> random_r.c:391] libc-2.27.so 0.00% 48 1.07% 48 [x86_pmu_enable+284 -> x86_pmu_enable+298] [kernel.kallsyms] 0.00% 74 1.64% 74 [vm_mmap_pgoff+0 -> vm_mmap_pgoff+92] [kernel.kallsyms] 0.00% 73 1.62% 73 [vm_mmap+0 -> vm_mmap+48] [kernel.kallsyms] 0.00% 63 0.69% 31 [up_write+0 -> up_write+34] [kernel.kallsyms] 0.00% 13 0.29% 13 [setup_arg_pages+396 -> setup_arg_pages+413] [kernel.kallsyms] 0.00% 3 0.07% 3 [setup_arg_pages+418 -> setup_arg_pages+450] [kernel.kallsyms] 0.00% 616 6.84% 308 [security_mmap_file+0 -> security_mmap_file+72] [kernel.kallsyms] 0.00% 23 0.51% 23 [security_mmap_file+77 -> security_mmap_file+87] [kernel.kallsyms] 0.00% 4 0.02% 1 [sched_clock+0 -> sched_clock+4] [kernel.kallsyms] 0.00% 4 0.02% 1 [sched_clock+9 -> sched_clock+12] [kernel.kallsyms] 0.00% 1 0.02% 1 [rcu_nmi_exit+0 -> rcu_nmi_exit+9] [kernel.kallsyms] Committer testing: This should provide material for hours of endless joy, both from looking for suspicious things in the implementation of this patch, such as the top one: # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object 2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux] As well from things that look legit: # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object 0.16% 123.0K 0.60% 4.7K [nospec-branch.h:265 -> nospec-branch.h:278] [kernel.vmlinux] :-) Very short system wide taken branches session: # perf record -h -b Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -b, --branch-any sample any taken branches # # perf record -b ^C[ perf record: Woken up 595 times to write data ] [ perf record: Captured and wrote 156.672 MB perf.data (196873 samples) ] # # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY # # perf report --total-cycles --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 6M of event 'cycles' # Event count (approx.): 6299936 # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ...................................................................... .................... # 2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux] 1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so 0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux] 0.56% 541.8K 0.09% 672 [compiler.h:199 -> common.c:300] [kernel.vmlinux] 0.39% 293.2K 0.01% 104 [list_debug.c:43 -> list_debug.c:61] [kernel.vmlinux] 0.36% 278.6K 0.03% 272 [entry_64.S:1289 -> entry_64.S:1308] [kernel.vmlinux] 0.30% 260.8K 0.07% 564 [clear_page_64.S:47 -> clear_page_64.S:50] [kernel.vmlinux] 0.28% 215.3K 0.05% 369 [traps.c:623 -> traps.c:628] [kernel.vmlinux] 0.23% 178.1K 0.04% 278 [entry_64.S:271 -> entry_64.S:275] [kernel.vmlinux] 0.20% 152.6K 0.09% 706 [paravirt.c:177 -> paravirt.c:179] [kernel.vmlinux] 0.20% 155.8K 0.05% 373 [entry_64.S:153 -> entry_64.S:175] [kernel.vmlinux] 0.18% 136.6K 0.03% 222 [msr.h:105 -> msr.h:166] [kernel.vmlinux] 0.16% 123.0K 0.60% 4.7K [nospec-branch.h:265 -> nospec-branch.h:278] [kernel.vmlinux] 0.16% 118.3K 0.01% 44 [entry_64.S:632 -> entry_64.S:657] [kernel.vmlinux] 0.14% 104.5K 0.00% 28 [rwsem.c:1541 -> rwsem.c:1544] [kernel.vmlinux] 0.13% 99.2K 0.01% 53 [spinlock.c:150 -> spinlock.c:152] [kernel.vmlinux] 0.13% 95.5K 0.00% 35 [swap.c:456 -> swap.c:471] [kernel.vmlinux] 0.12% 96.2K 0.05% 407 [copy_user_64.S:175 -> copy_user_64.S:209] [kernel.vmlinux] 0.11% 85.9K 0.00% 31 [swap.c:400 -> page-flags.h:188] [kernel.vmlinux] 0.10% 73.0K 0.01% 52 [paravirt.h:763 -> list.h:131] [kernel.vmlinux] 0.07% 56.2K 0.03% 214 [filemap.c:1524 -> filemap.c:1557] [kernel.vmlinux] 0.07% 54.2K 0.02% 145 [memory.c:1032 -> memory.c:1049] [kernel.vmlinux] 0.07% 50.3K 0.00% 39 [mmzone.c:49 -> mmzone.c:69] [kernel.vmlinux] 0.06% 48.3K 0.01% 40 [paravirt.h:768 -> page_alloc.c:3304] [kernel.vmlinux] 0.06% 46.7K 0.02% 155 [memory.c:1032 -> memory.c:1056] [kernel.vmlinux] 0.06% 46.9K 0.01% 103 [swap.c:867 -> swap.c:902] [kernel.vmlinux] 0.06% 47.8K 0.00% 34 [entry_64.S:1201 -> entry_64.S:1202] [kernel.vmlinux] ----------------------------------------------------------- v7: --- Use use_browser in report__browse_block_hists for supporting stdio and potential tui mode. v6: --- Create report__browse_block_hists in block-info.c (codes are moved from builtin-report.c). It's called from perf_evlist__tty_browse_hists. v5: --- 1. Move all block functions to block-info.c 2. Move the code of setting ms in block hist_entry to other patch. v4: --- 1. Use new option '--total-cycles' to replace '-s total_cycles' in v3. 2. Move block info collection out of block info printing. v3: --- 1. Use common function block_info__process_sym to process the blocks per symbol. 2. Remove the nasty hack for skipping calculation of column length 3. Some minor cleanup Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-6-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
We can get the per sample cycles by hist__account_cycles(). It's also useful to know the total cycles of all samples in order to get the cycles coverage for a single program block in further. For example: coverage = per block sampled cycles / total sampled cycles This patch creates a new argument 'total_cycles' in hist__account_cycles(), which will be added with the cycles of each sample. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191107074719.26139-4-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
To reduce boilerplate, provide a more compact form using an idiom present in other trees of data structures. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-59gmq4kg1r68ou1wknyjl78x@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 10月, 2019 1 次提交
-
-
由 Jin Yao 提交于
We received a user report that call-graph DWARF mode was enabled in 'perf record' but 'perf report' didn't unwind the callstack correctly. The reason was, libunwind was not compiled in. We can use 'perf -vv' to check the compiled libraries but it would be valuable to report a warning to user directly (especially valuable for a perf newbie). The warning is: Warning: Please install libunwind development packages during the perf build. Both TUI and stdio are supported. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 9月, 2019 1 次提交
-
-
由 Mamatha Inamdar 提交于
This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: NNageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: NMamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Tested-by: NNageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 9月, 2019 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Check that it is not needed and remove, fixing up some fallout for places where it was only serving to get something else. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 9月, 2019 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The mem_info struct goes to mem-events.h and branch_info goes to branch.h, where they belong, this way we can remove several headers from symbols.h and trim the include dependency tree more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
We only need a forward declaration, add it and fixup all the files that need ui_progress definitions but were wrongly getting it from hist.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-84a90o9jdxybffxo9jmouokw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-