- 27 2月, 2007 40 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Timur Tabi 提交于
Update ucc_geth_probe() to use function of_get_mac_address() to obtain the MAC address. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Use comma's consistently. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
It looks like the skge driver inherited another bug from the sk98lin code. If I send from 1000mbit port to a machine on 100mbit port, the switch should be doing hardware flow control, but no pause frames show up in the statistics. This is the analog of the recent sky2 fixes. The device needs to listen for multicast pause frames and then not discard them. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Work around a bug which occurs when adopting firmware versions 1.4.4 though 1.4.11 where broadcasts are filtered as if they were multicasts. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Amit S. Kale 提交于
Signed-off-by: NAmit S. Kale <amitkale@netxen.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Amit S. Kale 提交于
Signed-off-by: NAmit S. Kale <amitkale@netxen.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
Update driver support contact info. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
Janitorial patch. Undo long lines, fix typo in err msg. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
Multiple threads performing a transmit can race into the spidernet tx ring cleanup code. This puts the relevant check under a lock. Signed-off-by: NLinas Vepstas <lins@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
It appears that under certain circumstances, a race will result in a double-free of an skb. This patch null's out the skb pointer upon the skb free, avoiding the inadvertent deref of bogus data. The next patch fixes the actual race. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
This patch separates the hardware descriptor state from the driver descriptor state, per (old) suggestion from Ben Herrenschmidt. This compiles and boots and seems to work. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jens Osterkamp 提交于
This moves the medium variable into the spidernet card structure. It renames the GMII_ variables to BCM54XX specific ones. Signed-off-by: NJens Osterkamp <jens@de.ibm.com> Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ishizaki Kou 提交于
This patches removes logging for SPIDER_NET_GTMFLLINT interrupts. Since the interrupts are not irregular, and they happen frequently when using 100Mbps network switches. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kou Ishizaki 提交于
This patch adds or changes some HW specific settings for spider_net on Celleb. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kou Ishizaki 提交于
This patch moves calling init_firmware() from spider_net_probe() to spider_net_open() so as to use the driver by built-in. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kou Ishizaki 提交于
Add auto negotiation support for Celleb. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linas Vepstas 提交于
As of 2.6.20-git4, the spider_net driver does not compile. This appears to be due to some archaic usage involving kobjects. It also fixes a nasty double-free during ifdown of the interface. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jens Osterkamp 提交于
This version moves the medium variable to the card specific structure and changes the GMII_* to BCM54XX_* #defines. This patch adds improved version of enable_fiber for both the 5421 and the 5461 phy. It is now possible to specify with these wether you want autonegotiation or not. This is needed for bladecenter switches where some expect autonegotiation and some dont seem to like this at all. Depending on this flag it sets phy->autoneg accordingly for the fiber mode. More importantly it implements proper read_link and poll_link functions for both phys which can handle both copper and fiber mode by determining the medium first and then branching to the required functions. For fiber they all work fine, for copper they are not tested but return the result of the genmii_* function anyway which is supposed to work. The patch moves the genmii_* functions around to avoid foreward declarations. Signed-off-by: NJens Osterkamp <jens@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ayaz Abdulla 提交于
This patch removes checksum offload feature in mcp65 chipsets as they are not supported in hw. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ayaz Abdulla 提交于
There seems to be an issue when both MSI-X is enabled and NAPI is configured. This patch disables MSI-X until the issue is root caused. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ayaz Abdulla 提交于
The napi poll routine was missing the call to the optimized rx process routine. This patch adds the missing call for the optimized path. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
* clear_page() use is wrong. We might have multiple pages. Use memset() instead. * Call pci_unregister_driver() in module exit. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Robert P. J. Day 提交于
Delete the definition of the apparently unreferenced macro _IOC_SLMASK. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Use MIPS_CPU_IRQ_BASE instead of own define. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Koeller 提交于
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Koeller 提交于
This change is purely cosmetical. Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
pcibios_fixup_device_resources() is called by pcibios_fixup_bus() which is marked as __devinit. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Many Makefiles in arch/mips have EXTRA_AFLAGS := $(CFLAGS) line. This is redundant while AFLAGS contains $(cflags-y) and any options only listed in CFLAGS (not in cflags-y) should be unnecessary for asm sources. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (51 commits) [libata] bump versions [libata] Trim trailing whitespace. [libata] sata_mv: Fix 50xx irq mask [libata] sata_mv: don't touch reserved bits in EDMA config register libata: Use new id_to_dma_mode function to tidy reporting in more drivers (minimally tested) pata_pcmcia: Fix oops in 2.6.21-rc1 Add id_to_dma_mode function for printing DMA modes sata_promise: simplify port setup sata_promise: fix 20619 new EH merge error [libata] ACPI: remove needless ->qc_issue hook existence test sata_vsc: refactor vsc_sata_interrupt and hook up error handling sata_sil: ignore and clear spurious IRQs while executing commands by polling sata_mv: fix pci_enable_msi() error handling pata_amd: fix an obvious bug in cable detection [libata] ata_piix: remove duplicate PCI IDs sata_nv: complain on spurious completion notifiers libata: test major version in ata_id_is_sata() sata_nv: kill old private BMDMA helper functions libata: fix remaining ap->id ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated) ...
-
由 Linus Torvalds 提交于
This reverts commit aeeddc14, which was half-baked and broken. It just resulted in compile errors, since cpufreq_register_driver() still changes the 'driver_data' by setting bits in the flags field. So claiming it is 'const' _really_ doesn't work. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] constify some data tables. [CPUFREQ] constify cpufreq_driver where possible. {rd,wr}msr_on_cpu SMP=n optimization [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR rdmsr_on_cpu, wrmsr_on_cpu [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI
-