Some system designs provide an input on GPIO5 which in conjunction with
the jack detection feature indicates the presence of an accessory.
Support such systems, using the microphone clamp feature to minimise
wakeups of the processor.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Newer Arizona devices include a microphone clamp function which is tied to
jack detect. Activate this feature when present in order to ensure best
performance of the subsystem.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Allow configuration of the rise time for MICBIAS via platform data, the
delay required depends on things like the external component selection.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

The micd_pol GPIO is only requested if we've specified one greater than 0
so apply the same test before we set it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Now this is configured by platform data remove the defualt configuration
the driver had.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch support the detection of Dock-Smart device which include
three type of port(HDMI, USB for mouse/keyboard and Micro-USB for
USB/TA cable).The Dock-Smart device need always exteranl power supply
(USB/TA cable through micro-usb cable). Dock-Smart device support screen
output of target to separate monitor and mouse/keyboard for desktop
mode.

Features of 'Dock-Smart device'
- Support HDMI
- Support external output feature of audio
- Support charging through micro-usb port without data
  connection if TA cable is connected to target.
- Support charging and data connection through micro-usb port
  if USB cable is connected between target and host device.
- Support OTG device (Mouse/Keyboard)
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch fix bug that muic couldn't detect MHL/Dock-Audio with USB/TA
cable on exception situation. I explain detail case on following:

When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable is attached,
the MUIC device happen following two interrupt.
- 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio.
- 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable connected to
MHL/Dock-Audio. Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt
than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt.

If user attach MHL with USB/TA cable and immediately detach MHL with USB/TA
cable before MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt is happened, USB/TA
connected to MHL cable remain connected state to target. But USB/TA connected
to MHL cable isn't connected to target. user be faced with unusual action.
So, driver should check this situation in spite of that, previous charger type
is N/A.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch determine default uart/usb path by using platform data.
The MAX77693 MUIC device can possibliy set USB/UART/AUDIO/USB_AUX
/UART_AUX to internal h/w path of MUIC device. So, drvier should
determine default uart/usb path.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch check the state/type of cable after completing the initialization
of platform and notify platform of cable state/type through extcon. If extcon
provider driver notify the state/type of cable before completing platform boot,
this uevent is unused and ignored.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch support detection of dock device with extcon and
buttons of dock device for playing music with input subsystem.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch detect several kinds of JIG cable according to ADC value
and set the hardware line path according to type of JIG cable(JIG-USB-ON
/JIG-USB-OFF/JIG-UART-OFF).
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch support MHL_TA cable for charging battery. The MHL_TA
cable include MHL with TA cable or MHL with micro USB cable. When
MHL with TA/USB cable is attached, extcon-max77693 driver detect
two interrupt for handling precise operation according to each cable
(MHL and TA/USB cable).
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

This patch make max77693-muic_get_cable_type() function to remove
duplicate code because almost internal function need to read
adc/adc1k/adclow/chg_type value of MUIC register. Also, this patch
add description of internal function move field constant of muic device
from extcon-max77693 driver to max77693 header file because of it
is needed for masking some interrupt through platform data.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>

devm_kzalloc() is a device managed function. It makes error handling
and cleanup code a bit simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

devm_kzalloc() is a device managed function. It makes error handling
and cleanup code a bit simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Electrnoics -> Electronics
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Fixes the following checkpatch error:
ERROR: space required after that ',' (ctx:VxV)
460: FILE: extcon/extcon-max8997.c:460:
		ret = request_threaded_irq(virq, NULL,max8997_muic_irq_handler,
		                                     ^
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

As per kernel coding style, if one branch of conditional statement has braces,
the other one should have too.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>

irq_create_mapping() returns 0 if it fails to provide a valid irq number.
'ret' needs to be updated with a negative error code before returning from
probe to signal probe failure. While at it, also corrected the 'virq' type to
unsigned from signed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

irq_create_mapping() returns 0 if it fails to provide a valid irq number.
'ret' needs to be updated with a negative error code before returning from
probe to signal probe failure. While at it, also corrected the 'virq' type to
unsigned from signed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

Return the value obtained from the function extcon_register_interest
instead of -ENODEV.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

If regmap_read() failed, arizona_micdet() returns IRQ_NONE
leaving &info->lock mutex locked as opposed to all other return paths.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>

There are some scnearios where a driver/framework needs to register
interest for a particular cable without specifying the extcon device
name. One such scenario is charger notifications. The platform will
have charger cabel which will be bound to any extcon device. It's
not mandatory for the charger driver to know which extcon device
it should use. This patch enables the support for registering
interest for a cable just by cable name wihtout specifying the
extcon device name
Signed-off-by: NJenny TC <jenny.tc@intel.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>

--
Kernel-doc comment added by MyungJoo Ham

Extcon core doesn't free the memory when we do unregister.
Kfree is added in the remove path as it was missing.
Signed-off-by: Nanish kumar <anish198519851985@gmail.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

There was a case where free and list_del can be called twice
on the same pointer.So fixed it by re-arranging the code and
removing a function which was not needed.
Signed-off-by: Nanish kumar <anish198519851985@gmail.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch add platform data for MUIC device to initialize register
on probe() call because it should unmask interrupt mask register
and initialize some register related to MUIC device.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This simplifies the code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

This driver can be built as a module, add MODULE_LICENSE for it.
For completeness, also adds MODULE_AUTHOR and MODULE_DESCRIPTION.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

On failure, request_any_context_irq() returns a negative value.
On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.

Also ensure adc_jack_probe() return 0 on success.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Propagate the value returned from extcon_find_cable_index()
instead of -ENODEV. For readability, -EINVAL is returned in place of
the variable.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Since extcon registers this compat link at device registration
(extcon_dev_register), we should probably remove them at deregistration/cleanup.

Cc: stable@vger.kernel.org
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

If you compile extcon with CONFIG_ANDROID and then load and unload the
module you get a simple oops as the driver does not unregister its
compat class and thus cannot register it again.

Full trace:

root@(none):~# modprobe extcon_class
root@(none):~# rmmod extcon_class
root@(none):~# modprobe extcon_class
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xde/0x100()
sysfs: cannot create duplicate filename '/class/switch'
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451a00:  [<602a58bc>] printk+0x0/0xa8
9f451a18:  [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451a28:  [<6012c6de>] sysfs_add_one+0xde/0x100
9f451a50:  [<601d3d90>] strcat+0x0/0x40
9f451a68:  [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451a90:  [<6002fe32>] unblock_signals+0x0/0x84
9f451ab0:  [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451ac0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451ae8:  [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70
9f451b00:  [<601d3d90>] strcat+0x0/0x40
9f451b18:  [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70
9f451b48:  [<6012c6de>] sysfs_add_one+0xde/0x100
9f451b78:  [<6012c96f>] create_dir+0x8f/0x100
9f451bc0:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451bd8:  [<6012cda6>] sysfs_create_dir+0xa6/0x1c0
9f451be8:  [<601d89f1>] kvasprintf+0x81/0xa0
9f451bf8:  [<601cf0f0>] kobject_get+0x0/0x50
9f451c18:  [<601cf396>] kobject_add_internal+0x96/0x280
9f451c60:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451c78:  [<601cfb93>] kobject_add+0xd3/0x140
9f451cc0:  [<601cfac0>] kobject_add+0x0/0x140
9f451cd0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451cf8:  [<6002fffc>] set_signals+0x29/0x3f
9f451d28:  [<600c1de1>] kmem_cache_alloc+0xe1/0x100
9f451d78:  [<601cffa0>] kobject_create_and_add+0x50/0xa0
9f451da8:  [<601fbe76>] class_compat_register+0x56/0x80
9f451dc8:  [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class]
9f451de8:  [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8:  [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58:  [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88:  [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8:  [<60033370>] userspace+0x405/0x531
9f451ee8:  [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8:  [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8:  [<6001a355>] fork_handler+0x95/0xa0

---[ end trace dd512cc03fe1c367 ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:196 kobject_add_internal+0x26e/0x280()
kobject_add_internal failed for switch with -EEXIST, don't try to
register things with the same name in the same directory.
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451ad0:  [<602a58bc>] printk+0x0/0xa8
9f451ae8:  [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451af8:  [<601cf56e>] kobject_add_internal+0x26e/0x280
9f451b18:  [<601cf140>] kobject_put+0x0/0x70
9f451b20:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451b38:  [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451b88:  [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451bc0:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451bd8:  [<6012cda6>] sysfs_create_dir+0xa6/0x1c0
9f451be8:  [<601d89f1>] kvasprintf+0x81/0xa0
9f451bf8:  [<601cf0f0>] kobject_get+0x0/0x50
9f451c18:  [<601cf56e>] kobject_add_internal+0x26e/0x280
9f451c60:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451c78:  [<601cfb93>] kobject_add+0xd3/0x140
9f451cc0:  [<601cfac0>] kobject_add+0x0/0x140
9f451cd0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451cf8:  [<6002fffc>] set_signals+0x29/0x3f
9f451d28:  [<600c1de1>] kmem_cache_alloc+0xe1/0x100
9f451d78:  [<601cffa0>] kobject_create_and_add+0x50/0xa0
9f451da8:  [<601fbe76>] class_compat_register+0x56/0x80
9f451dc8:  [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class]
9f451de8:  [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8:  [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58:  [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88:  [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8:  [<60033370>] userspace+0x405/0x531
9f451ee8:  [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8:  [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8:  [<6001a355>] fork_handler+0x95/0xa0

---[ end trace dd512cc03fe1c368 ]---
kobject_create_and_add: kobject_add error: -17
------------[ cut here ]------------
WARNING: at drivers/extcon/extcon_class.c:545
create_extcon_class+0xbc/0xd0 [extcon_class]()
cannot allocate
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451c80:  [<602a58bc>] printk+0x0/0xa8
9f451c98:  [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451ca0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451ca8:  [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class]
9f451cd0:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451ce8:  [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451d20:  [<6002fe32>] unblock_signals+0x0/0x84
9f451d28:  [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451d48:  [<6002fffc>] set_signals+0x29/0x3f
9f451d58:  [<601cf172>] kobject_put+0x32/0x70
9f451d78:  [<600c22c3>] kfree+0xb3/0x100
9f451da8:  [<601fbe9a>] class_compat_register+0x7a/0x80
9f451dc8:  [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class]
9f451de8:  [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8:  [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58:  [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88:  [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8:  [<60033370>] userspace+0x405/0x531
9f451ee8:  [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8:  [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8:  [<6001a355>] fork_handler+0x95/0xa0

---[ end trace dd512cc03fe1c369 ]---
FATAL: Error inserting extcon_class
(/lib/modules/3.6.0-rc6-00178-g811315f/kernel/drivers/extcon/extcon_class.ko):
Cannot allocate memory

This patch fixes this.

Cc: stable@vger.kernel.org
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Rather than re-inventing the wheel we can use the hamming function
to calculate the number of bits set to check for violation of
exclusivity.
Signed-off-by: Nanish kumar <anish198519851985@gmail.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>