Add a matching table for the the bcm63xx_uart driver on the compatible
string "brcm,bcm6345-uart" which covers all BCM63xx implementations and
reflects the fact that this block was first introduced with the BCM6345
SoC.  Also make sure that we convert the id based on the uart aliases
provided by the relevant Device Tree.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The bcm63xx_uart driver uses RSET_UART_SIZE which is a constant defined
for MIPS-based BCM63xx platforms, pull this constant value from the
MIPS-specific header and put it in include/linux/serial_bcm63xx.h to
make the driver platform agnostic.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Include linux/io.h which provides the definition for
__raw_{readl,writel}, this is not necessary on MIPS since there is an
implicit inclusion, but it is on ARM for instance.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These can be used to send commands consisting of an arbitrary string to the
terminal, most often used to set a terminal's window title or to redefine
the colour palette.  Our console doesn't use OSC, unlike everything else,
which can lead to junk being displayed if a process sends such a code
unconditionally.

The rules for termination follow established practice rather than Ecma-48.
Ecma-48 requires the string to use only byte values 0x08..0x0D and
0x20..0x7E, terminated with either ESC \ or 0x9C.  This would disallow using
8-bit characters, which are reasonable for example in window titles.
A widespread idiom is to terminate with 0x07.  The behaviour for other
control characters differs between terminal emulators, I followed libvte and
xterm:
* 0x07 and ESC anything terminate
* nothing else terminates, all 8-bit values including 0x9C are considered a
  part of the string
Signed-off-by: NAdam Borowski <kilobyte@angband.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAdam Borowski <kilobyte@angband.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Every couple of months, someone sends a patch to fix:

drivers/tty/serial/8250/8250_core.c: In function 'serial_unlink_irq_chain':
drivers/tty/serial/8250/8250_core.c:1712:2: warning: 'i' may be used uninitialized in this function [-Wuninitialized]

and they in turn get a NACK for their efforts, and are told that
their compiler is broken.  This has been going on since at least
the year 2008:  https://lkml.org/lkml/2008/11/24/433

Lets add a comment, so that subsequent patches don't get as far as
the maintainers or the mailing lists.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit d8a5dc30.

This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect.  Either way, this needs
to be reverted until it is all figured out.
Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
Reported-by: NRay Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add dma support for lpuart. This function depend on DMA driver.
You can turn on it by write both the dmas and dma-name properties in dts node.
Signed-off-by: NYuan Yao <yao.yuan@freescale.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sparse warnings: (new ones prefixed by >>)

>> drivers/tty/serial/max310x.c:906:45: sparse: incorrect type in argument 2 (different address spaces)
 drivers/tty/serial/max310x.c:906:45: expected void const [noderef] <asn:1>*from
 drivers/tty/serial/max310x.c:906:45: got struct serial_rs485 *<noident>
>> drivers/tty/serial/max310x.c:938:35: sparse: incorrect type in argument 1 (different address spaces)
 drivers/tty/serial/max310x.c:938:35: expected void [noderef] <asn:1>*to
 drivers/tty/serial/max310x.c:938:35: got struct serial_rs485 *<noident>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Kconfig symbol SVINTO_SIM got dropped in commit e269a869 ("Drop
code for CRISv10 CPU simulator"). Now drop the remaining code for that
simulator.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a temporary solution to fix following issue:
config: make ARCH=alpha allyesconfig

All error/warnings:

 drivers/tty/serial/max310x.c: In function 'max310x_ioctl':
>> drivers/tty/serial/max310x.c:905:7: error: 'TIOCSRS485' undeclared (first use in this function)
 drivers/tty/serial/max310x.c:905:7: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/tty/serial/max310x.c:906:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
>> drivers/tty/serial/max310x.c:929:7: error: 'TIOCGRS485' undeclared (first use in this function)
>> drivers/tty/serial/max310x.c:938:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
 cc1: some warnings being treated as errors
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit e3c6ea9b as it
didn't help anything, and caused more problems than expected.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

\E[3J console code (secure clear screen) needs to update_screen(vc)
in order to write-through blanks into off-screen video memory.

This has been removed accidentally in 3.6 by:

commit 81732c3b
Author: Jean-François Moine <moinejf@free.fr>
Date:   Thu Sep 6 19:24:13 2012 +0200

    tty vt: Fix line garbage in virtual console on command line edition
Signed-off-by: NPetr Písař <petr.pisar@atlas.cz>
Cc: stable <stable@vger.kernel.org> # 3.6
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 3e6c6f63 ("Delay creation of
khcvd thread") moved the call of hvc_init from being a device_initcall
into hvc_alloc, and used a non-null hvc_driver as indication of whether
hvc_init had already been called.

The problem with this is that hvc_driver is only assigned a value
at the bottom of hvc_init, and so there is a window where multiple
hvc_alloc calls can be in progress at the same time and hence try
and call hvc_init multiple times.  Previously the use of device_init
guaranteed that hvc_init was only called once.

This manifests itself as sporadic instances of two hvc_init calls
racing each other, and with the loser of the race getting -EBUSY
from tty_register_driver() and hence that virtual console fails:

    Couldn't register hvc console driver
    virtio-ports vport0p1: error -16 allocating hvc for port

Here we add an atomic_t to guarantee we'll never run hvc_init twice.

Cc: stable@vger.kernel.org  # v2.6.24+
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 3e6c6f63 ("Delay creation of khcvd thread")
Reported-by: NJim Somerville <Jim.Somerville@windriver.com>
Tested-by: NJim Somerville <Jim.Somerville@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

instead of using sirf specific dma channel property like "sirf,uart-dma-rx-channel"
and "sirf,uart-dma-tx-channel", here we move to use generic dma dt-binding to get
the channel like:
- sirf,uart-dma-rx-channel = <21>;
- sirf,uart-dma-tx-channel = <2>;
+ dmas = <&dmac1 5>, <&dmac0 2>;
+ dma-names = "rx", "tx";

and we move dma_request_channel() to dma_request_slave_channel(), we don't need to
call sirfsoc dma filter function sirfsoc_dma_filter_id() again.
Signed-off-by: NQipan Li <Qipan.Li@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

uart_register_driver call binds the driver to a specific device
node through tty_register_driver call. This should typically happen
during device probe call.

In a multiplatform scenario, it is possible that multiple serial
drivers are part of the kernel. Currently the driver registration fails
if multiple serial drivers with same default major/minor numbers are
included in the kernel.

A typical case is observed with amba-pl011 and samsung-uart drivers.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

uart_register_driver call binds the driver to a specific device
node through tty_register_driver call. This should typically happen
during device probe call.

In a multiplatform scenario, it is possible that multiple serial
drivers are part of the kernel. Currently the driver registration fails
if multiple serial drivers with same default major/minor numbers are
included in the kernel.

A typical case is observed with amba-pl011 and samsung-uart drivers.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

config: x86_64-randconfig-x006 (attached as .config)

All warnings:

 drivers/tty/serial/max310x.c: In function 'max310x_probe':
>> drivers/tty/serial/max310x.c:1240:1: warning: label 'out_uart' defined but not used [-Wunused-label]
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

config: make ARCH=alpha allyesconfig

All error/warnings:

 drivers/tty/serial/max310x.c: In function 'max310x_ioctl':
>> drivers/tty/serial/max310x.c:905:7: error: 'TIOCSRS485' undeclared (first use in this function)
 drivers/tty/serial/max310x.c:905:7: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/tty/serial/max310x.c:906:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
>> drivers/tty/serial/max310x.c:929:7: error: 'TIOCGRS485' undeclared (first use in this function)
>> drivers/tty/serial/max310x.c:938:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
 cc1: some warnings being treated as errors
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current code only wakes up the processes when the circle
buffer has less data then the WAKEUP_CHARS.

But sometimes, the circle buffer may has data more then the WAKEUP_CHARS,
in such case, the processes will hang.

This patch makes it always wakes up the processes in the TX callback.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a driver bug which stopped the whole system (in case
of serial console).
This log message is not useful anyway as this information is
printed elsewhere.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Greg,

Please note this patch requires
   n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0

Regards,
Peter Hurley
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Exar XR17V35x family of UARTs have an additional fractional divisor
register (DLD) which was not being used. Calculate and set this
register for these devices to reduce their baud rate error.
Signed-off-by: NJoe Schultz <jschultz@xes-inc.com>
Signed-off-by: NAaron Sierra <asierra@xes-inc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When echoes cannot be flushed to output (usually because the tty
has no more write room) and L_ECHO is subsequently turned off, then
when L_ECHO is turned back on, stale echoes are output.

Output completed echoes regardless of the L_ECHO setting:
  1. before normal writes to that tty
  2. if the tty was stopped by soft flow control and is being
     restarted
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b9ade9f coming from Viresh Kumar "tty: serial: sirfsoc: drop
uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart
driver by knic:

	[    5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331
	[    5.132554]  lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead,
	.owner: <none>/-1, .owner_cpu: -1
	[    5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G
	W  O 3.10.16 #3
	[    5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from
	[<c0010e70>] (show_stack+0x10/0x14)
	[    5.157362] [<c0010e70>] (show_stack+0x10/0x14) from
	[<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8)
	[    5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from
	[<c03ff8b4>] (_raw_spin_unlock+0x8/0x40)
	[    5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from
	[<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0)
	[    5.185120] [<c0203fcc>]
	(sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>]
	(sirfsoc_rx_tmo_process_tl+0xdc/0x1e0)
	[    5.195875] [<c0204fb8>]
	(sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>]
	(tasklet_action+0x8c/0xec)
	[    5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from
	[<c00242a8>] (__do_softirq+0xec/0x1d4)
	[    5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from
	[<c0024428>] (do_softirq+0x48/0x54)
	[    5.222674] [<c0024428>] (do_softirq+0x48/0x54) from
	[<c0024690>] (irq_exit+0x74/0xc0)
	[    5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from
	[<c000e1e8>] (handle_IRQ+0x6c/0x90)
	[    5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from
	[<c000d500>] (__irq_svc+0x40/0x70)
	[    5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from
	[<c0092e7c>] (mark_page_accessed+0xc/0x68)
	[    5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from
	[<c00a2a4c>] (unmap_single_vma+0x3bc/0x550)
	[    5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from
	[<c00a3b4c>] (unmap_vmas+0x44/0x54)
	[    5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from
	[<c00a81a8>] (exit_mmap+0xc4/0x1e0)
	[    5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from
	[<c001bb78>] (mmput+0x3c/0xdc)
	[    5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>]
	(do_exit+0x30c/0x828)
	[    5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from
	[<c0022dac>] (do_group_exit+0x4c/0xb0)
	[    5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from
	[<c0022e20>] (__wake_up_parent+0x0/0x18)

Root cause:
the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart,
sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock
has not been taken yet. so that caused unpaired lock/unlock.

Solution:
This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to
sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair.
Signed-off-by: NQipan Li <Qipan.Li@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards).
Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI
device, function 2. Using standard BAR indices makes all 6 ports work
for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device.

For the reference, here is the relevant part of lspci for my device:

02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI
9865 Multi-I/O Controller (prog-if 02 [16550])
	Subsystem: Device a000:1000
	Flags: bus master, medium devsel, latency 32, IRQ 17
	I/O ports at ac00 [size=8]
	Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
	Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [48] Power Management version 2
	Kernel driver in use: serial

02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI
9865 Multi-I/O Controller (prog-if 02 [16550])
	Subsystem: Device a000:1000
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at a800 [size=8]
	Memory at fcffd000 (32-bit, non-prefetchable) [size=4K]
	Memory at fcffc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [48] Power Management version 2
	Kernel driver in use: serial

02:07.2 Communication controller: MosChip Semiconductor Technology Ltd.
PCI 9865 Multi-I/O Controller
	Subsystem: Device a000:3004
	Flags: bus master, medium devsel, latency 32, IRQ 19
	I/O ports at a400 [size=8]
	I/O ports at a000 [size=8]
	I/O ports at 9c00 [size=8]
	I/O ports at 9800 [size=8]
	Memory at fcffb000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [48] Power Management version 2
	Kernel driver in use: serial
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit eafbe67f,
  n_tty: Refactor input_available_p() by call site
broke poll() when TIME_CHAR(tty) and MIN_CHAR(tty) are both 0.

When TIME_CHAR and MIN_CHAR are both 0, input is available if the
read_cnt is 1 (not 0).
Reported-by: NEric Dumazet <edumazet@google.com>
Tested-by: NEric Dumazet <edumazet@google.com>
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the gpio is not yet available we better also
defer the probing in the rs485 case.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and
CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes
following compilation warnings:

drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function]
drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function]

Fix this by using CONFIG_PM_SLEEP instead.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the info message about a missing wakeirq for uart is printed
every time the serial driver's startup function is called. This happens
multiple times and not just once.

This can cause lots of extra messages at boot time, slowing things down.  It is
caused by commit 2a0b965c (serial: omap: Add support for optional wake-up)
which was applied for v3.13-rc1.

This patch moves the infomessage to the probe function to display it
only once.
Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org> # 3.13
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds devicetree support for the MAX310X serial driver.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes some unused definitions from driver code and
sort #includes alphabetically.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for RS-485 (TIOCSRS485/TIOCGRS485) IOCTLs.
As a result this patch eliminate private driver header.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Always register GPIOs and use dynamic GPIO ID assignment.
This is no much worth if GPIOs is not used, but helps remove
private driver header and add DT support in the future.
Additionally, patch adds missing uart_unregister_driver()
call if probe() fails.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes "frequency" parameter from MAX310X platform_data
and uses CLK API for getting clock. Clock type (XTAL/OSC) is
determined by clk name.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Patch move all SPI-dependent stuff in one place. This include move
PM-function definitions out of CONFIG_SPI_MASTER and move regmap
initialization out of common probe into CONFIG_SPI_MASTER which
may help to add I2C support in the future for this driver.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since 93abe8e4 (clk: add non CONFIG_HAVE_CLK routines) code using clk.h
like this driver needs not depend on HAVE_CLK.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes excess IRQ checks at driver probe().
IRQ validation is already provided by request_threaded_irq().
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces loopback mode support from platform data to
dynamic setup with TIOCMSET ioctl.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>