- 09 11月, 2018 3 次提交
-
-
由 Yael Chemla 提交于
Add support for SM3 cipher in CryptoCell 713. Signed-off-by: NYael Chemla <yael.chemla@foss.arm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Yael Chemla 提交于
encapsulate set_cipher_mode call with another api, preparation for specific hash behavior as needed in later patches when SM3 introduced. Signed-off-by: NYael Chemla <yael.chemla@foss.arm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Yael Chemla 提交于
Adjust hash length such that it will not be fixed and general for all algs. Instead make it suitable for certain context information. This is preparation for SM3 support. Signed-off-by: NYael Chemla <yael.chemla@foss.arm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 09 7月, 2018 3 次提交
-
-
由 Hadar Gat 提交于
finup() operation was incorrect, padding was missing. Fix by setting the ccree HW to enable padding. Signed-off-by: NHadar Gat <hadar.gat@arm.com> [ gilad@benyossef.com: refactored for better code sharing ] Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Cc: stable@vger.kernel.org Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Eric Biggers 提交于
Some ahash algorithms set .cra_type = &crypto_ahash_type. But this is redundant with the C structure type ('struct ahash_alg'), and crypto_register_ahash() already sets the .cra_type automatically. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the ahash algorithms. This patch shouldn't change any actual behavior. Signed-off-by: NEric Biggers <ebiggers@google.com> Acked-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Eric Biggers 提交于
Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH. But this is redundant with the C structure type ('struct ahash_alg'), and crypto_register_ahash() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the ahash algorithms. This patch shouldn't change any actual behavior. Signed-off-by: NEric Biggers <ebiggers@google.com> Acked-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 03 3月, 2018 1 次提交
-
-
由 Gilad Ben-Yossef 提交于
Add support for the legacy CryptoCell 630 and 710 revs. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 15 2月, 2018 1 次提交
-
-
由 Gilad Ben-Yossef 提交于
Add CryptoCell async. hash and HMAC support. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 15 1月, 2018 1 次提交
-
-
由 Dan Carpenter 提交于
These lines are less than 80 characters so we don't need to break them up into chunks. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 1月, 2018 2 次提交
-
-
由 Gilad Ben-Yossef 提交于
Remove include files not needed for compilation. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree driver source files were using an inconsistent naming convention stemming from what the company was called when they were added. Move to a single consistent naming convention for better code readability. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 1月, 2018 13 次提交
-
-
由 Gilad Ben-Yossef 提交于
Fold common code in hash call into service functions. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Fix indentation of some function params in hash code for better readability. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
hash_init was mapping DMA memory that were then being unmap in hash_digest/final/finup callbacks, which is against the Crypto API usage rules (see discussion at https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg30077.html) Fix it by moving all buffer mapping/unmapping or each Crypto API op. This also properly deals with hash_import() not knowing if hash_init was called or not as it now no longer matters. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Move to allocating the buffers needed for requests as part of the request structure instead of malloc'ing each one on it's own, making for simpler (and more efficient) code. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree hash code is using a double buffer to hold data for processing but manages the buffers and their associated data count in two separate fields and uses a predicate to chose which to use. Move to using a proper 2 members array for a much cleaner code. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Remove unused struct field. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
This reverts commit c5f39d07 ("staging: ccree: fix leak of import() after init()") and commit aece0902 ("staging: ccree: Uninitialized return in ssi_ahash_import()"). This is the wrong solution and ends up relying on uninitialized memory, although it was not obvious to me at the time. Cc: stable@vger.kernel.org Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Crypto API tfm providers are required to provide a backlog service, if so indicated, that queues up requests in the case of the provider being busy and processing them later. The ccree driver did not provide this facility. Add it now. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The send_request() function was handling both synchronous and asynchronous invocations, but were not handling the asynchronous case, which may be called in an atomic context, properly as it was sleeping. Start to fix the problem by breaking up the two use cases to separate functions calling a common internal service function and return error instead of sleeping for the asynchronous case. The next patch will complete the fix by implementing proper backlog handling. Fixes: abefd674 ("staging: ccree: introduce CryptoCell HW driver"). Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree driver was using a DMA operation to copy larval digest from the ccree SRAM to RAM. Replace it with a simple memcpy. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree driver was allocating memory using GFP_KERNEL flag always, ignoring the flags set in the crypto request. Fix it by choosing gfp flags based on crypto request flags. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Remove bogus GFP_DMA flag from memory allocations. ccree driver does not operate over an ISA or similar limited bus. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Replace verbatim GPL v2 copy with SPDX tag. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 12月, 2017 2 次提交
-
-
由 Gilad Ben-Yossef 提交于
Now that the only thing left in ssi_config is the maximum DMA mask length we get move that to ssi_driver.h and get rid of the file. All of ccree is now runtime configurable or under Kbuild control. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree driver has had a none standard sysfs interface for debugging. Replace it with a proper debugfs interface. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 12月, 2017 8 次提交
-
-
由 Gilad Ben-Yossef 提交于
Unify naming convention by renaming all ssi_ vars/structs/enums and variables to cc_* Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Unify naming convention by renaming all DX macros to CC. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Unify naming convention by renaming all SSI macros to CC. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Remove macro controlling build of various features. This needs to happen dynamically in registration time. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Fix function call parameter indentation according to coding style guide lines. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Func definitions in the hash implementation were did not adhere to coding style. Fix them for better readability. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The hash files were using a naming convention which was inconsistent (ssi vs. cc), included a useless prefix (ssi_hash) and often used too long function names producing monster such as ssi_ahash_get_initial_digest_len_sram_addr() that made the call site hard to read. Make the code more readable by switching to a simpler, consistent naming convention for the file. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Remove a no longer needed abstraction around ccree hash crypto API internals that used to allow same ops to be used in synchronous and asynchronous fashion. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 12月, 2017 3 次提交
-
-
由 Dan Carpenter 提交于
The return value isn't initialized on some success paths. Fixes: c5f39d07 ("staging: ccree: fix leak of import() after init()") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree code made a lot of use of likely/unlikely qualifiers without proven measurements showing any benefits. Remove them all until we see what is justified and what is not. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
The ccree drivers was marking a lot of big functions in C file as static inline for no good reason. Remove the inline qualifier from any but the few truly single line functions. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 11月, 2017 1 次提交
-
-
由 Gilad Ben-Yossef 提交于
crypto_ahash_import() may be called either after crypto_ahash_init() or without such call. Right now we always internally call init() as part of import(), thus leaking memory and mappings if the user has already called init() herself. Fix this by only calling init() internally if the state is not already initialized. Fixes: commit 454527d0 ("staging: ccree: fix hash import/export") Cc: stable <stable@vger.kernel.org> Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 11月, 2017 2 次提交
-
-
由 Gilad Ben-Yossef 提交于
Remove unneeded wrapper function to simplify code. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Rename the too long SSI_MAX_HASH_OPAD_TMP_KEYS_SIZE to SSI_MAX_OPAD_KEYS_SIZE for better code readability. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-