We have encountered failures when When testing smb2 mounts on ppc64
machines when using both Samba as well as Windows 2012.

On poking around, the problem was determined to be caused by the
high endian MessageID passed in the header for smb2. On checking the
corresponding MID for smb1 is converted to LE before being sent on the
wire.

We have tested this patch successfully on a ppc64 machine.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>

Pull block layer driver updates from Jens Axboe:

 - NVMe updates:
        - The blk-mq conversion from Matias (and others)

        - A stack of NVMe bug fixes from the nvme tree, mostly from Keith.

        - Various bug fixes from me, fixing issues in both the blk-mq
          conversion and generic bugs.

        - Abort and CPU online fix from Sam.

        - Hot add/remove fix from Indraneel.

 - A couple of drbd fixes from the drbd team (Andreas, Lars, Philipp)

 - With the generic IO stat accounting from 3.19/core, converting md,
   bcache, and rsxx to use those.  From Gu Zheng.

 - Boundary check for queue/irq mode for null_blk from Matias.  Fixes
   cases where invalid values could be given, causing the device to hang.

 - The xen blkfront pull request, with two bug fixes from Vitaly.

* 'for-3.19/drivers' of git://git.kernel.dk/linux-block: (56 commits)
  NVMe: fix race condition in nvme_submit_sync_cmd()
  NVMe: fix retry/error logic in nvme_queue_rq()
  NVMe: Fix FS mount issue (hot-remove followed by hot-add)
  NVMe: fix error return checking from blk_mq_alloc_request()
  NVMe: fix freeing of wrong request in abort path
  xen/blkfront: remove redundant flush_op
  xen/blkfront: improve protection against issuing unsupported REQ_FUA
  NVMe: Fix command setup on IO retry
  null_blk: boundary check queue_mode and irqmode
  block/rsxx: use generic io stats accounting functions to simplify io stat accounting
  md: use generic io stats accounting functions to simplify io stat accounting
  drbd: use generic io stats accounting functions to simplify io stat accounting
  md/bcache: use generic io stats accounting functions to simplify io stat accounting
  NVMe: Update module version major number
  NVMe: fail pci initialization if the device doesn't have any BARs
  NVMe: add ->exit_hctx() hook
  NVMe: make setup work for devices that don't do INTx
  NVMe: enable IO stats by default
  NVMe: nvme_submit_async_admin_req() must use atomic rq allocation
  NVMe: replace blk_put_request() with blk_mq_free_request()
  ...

Pull block driver core update from Jens Axboe:
 "This is the pull request for the core block IO changes for 3.19.  Not
  a huge round this time, mostly lots of little good fixes:

   - Fix a bug in sysfs blktrace interface causing a NULL pointer
     dereference, when enabled/disabled through that API.  From Arianna
     Avanzini.

   - Various updates/fixes/improvements for blk-mq:

        - A set of updates from Bart, mostly fixing buts in the tag
          handling.

        - Cleanup/code consolidation from Christoph.

        - Extend queue_rq API to be able to handle batching issues of IO
          requests. NVMe will utilize this shortly. From me.

        - A few tag and request handling updates from me.

        - Cleanup of the preempt handling for running queues from Paolo.

        - Prevent running of unmapped hardware queues from Ming Lei.

        - Move the kdump memory limiting check to be in the correct
          location, from Shaohua.

        - Initialize all software queues at init time from Takashi. This
          prevents a kobject warning when CPUs are brought online that
          weren't online when a queue was registered.

   - Single writeback fix for I_DIRTY clearing from Tejun.  Queued with
     the core IO changes, since it's just a single fix.

   - Version X of the __bio_add_page() segment addition retry from
     Maurizio.  Hope the Xth time is the charm.

   - Documentation fixup for IO scheduler merging from Jan.

   - Introduce (and use) generic IO stat accounting helpers for non-rq
     drivers, from Gu Zheng.

   - Kill off artificial limiting of max sectors in a request from
     Christoph"

* 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits)
  bio: modify __bio_add_page() to accept pages that don't start a new segment
  blk-mq: Fix uninitialized kobject at CPU hotplugging
  blktrace: don't let the sysfs interface remove trace from running list
  blk-mq: Use all available hardware queues
  blk-mq: Micro-optimize bt_get()
  blk-mq: Fix a race between bt_clear_tag() and bt_get()
  blk-mq: Avoid that __bt_get_word() wraps multiple times
  blk-mq: Fix a use-after-free
  blk-mq: prevent unmapped hw queue from being scheduled
  blk-mq: re-check for available tags after running the hardware queue
  blk-mq: fix hang in bt_get()
  blk-mq: move the kdump check to blk_mq_alloc_tag_set
  blk-mq: cleanup tag free handling
  blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map
  blk: introduce generic io stat accounting help function
  blk-mq: handle the single queue case in blk_mq_hctx_next_cpu
  genhd: check for int overflow in disk_expand_part_tbl()
  blk-mq: add blk_mq_free_hctx_request()
  blk-mq: export blk_mq_free_request()
  blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable
  ...

Merge tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixlet from Steven Rostedt:
 "Remove unnecessary preempt_disable in printk()"

* tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  printk: Do not disable preemption for accessing printk_func

Pull tracing fixes from Steven Rostedt:
 "Here's two fixes:

  1) Discovered by Fengguang Wu's tests.  I changed the parameters to
     the function graph x86 prepare_ftrace_return call but forgot to
     update the call from entry_32 (i386 version).  This patch corrects
     that.

  2) I was tracing some code and found that the sched_switch tracepoint
     was showing tasks in the INTERRUPTIBLE state as RUNNING.  This was
     due to the updates to convert preempt_count into a per_cpu
     variable.  The tracepoint logic was made to use the tasks
     saved_preempt_count which could hold a stale "PREEMPT_ACTIVE",
     instead of using the current preempt_count() call"

* tag 'trace-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/sched: Check preempt_count() for current when reading task->state
  ftrace/x86: Update i386 call to prepare_ftrace_return()

Pull audit updates from Paul Moore:
 "Two small patches from the audit next branch; only one of which has
  any real significant code changes, the other is simply a MAINTAINERS
  update for audit.

  The single code patch is pretty small and rather straightforward, it
  changes the audit "version" number reported to userspace from an
  integer to a bitmap which is used to indicate the functionality of the
  running kernel.  This really doesn't have much impact on the kernel,
  but it will make life easier for the audit userspace folks.

  Thankfully we were still on a version number which allowed us to do
  this without breaking userspace"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: convert status version to a feature bitmap
  audit: add Paul Moore to the MAINTAINERS entry

Pull crypto update from Herbert Xu:
 - The crypto API is now documented :)
 - Disallow arbitrary module loading through crypto API.
 - Allow get request with empty driver name through crypto_user.
 - Allow speed testing of arbitrary hash functions.
 - Add caam support for ctr(aes), gcm(aes) and their derivatives.
 - nx now supports concurrent hashing properly.
 - Add sahara support for SHA1/256.
 - Add ARM64 version of CRC32.
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
  crypto: tcrypt - Allow speed testing of arbitrary hash functions
  crypto: af_alg - add user space interface for AEAD
  crypto: qat - fix problem with coalescing enable logic
  crypto: sahara - add support for SHA1/256
  crypto: sahara - replace tasklets with kthread
  crypto: sahara - add support for i.MX53
  crypto: sahara - fix spinlock initialization
  crypto: arm - replace memset by memzero_explicit
  crypto: powerpc - replace memset by memzero_explicit
  crypto: sha - replace memset by memzero_explicit
  crypto: sparc - replace memset by memzero_explicit
  crypto: algif_skcipher - initialize upon init request
  crypto: algif_skcipher - removed unneeded code
  crypto: algif_skcipher - Fixed blocking recvmsg
  crypto: drbg - use memzero_explicit() for clearing sensitive data
  crypto: drbg - use MODULE_ALIAS_CRYPTO
  crypto: include crypto- module prefix in template
  crypto: user - add MODULE_ALIAS
  crypto: sha-mb - remove a bogus NULL check
  crytpo: qat - Fix 64 bytes requests
  ...

Merge second patchbomb from Andrew Morton:
 - the rest of MM
 - misc fs fixes
 - add execveat() syscall
 - new ratelimit feature for fault-injection
 - decompressor updates
 - ipc/ updates
 - fallocate feature creep
 - fsnotify cleanups
 - a few other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
  cgroups: Documentation: fix trivial typos and wrong paragraph numberings
  parisc: percpu: update comments referring to __get_cpu_var
  percpu: update local_ops.txt to reflect this_cpu operations
  percpu: remove __get_cpu_var and __raw_get_cpu_var macros
  fsnotify: remove destroy_list from fsnotify_mark
  fsnotify: unify inode and mount marks handling
  fallocate: create FAN_MODIFY and IN_MODIFY events
  mm/cma: make kmemleak ignore CMA regions
  slub: fix cpuset check in get_any_partial
  slab: fix cpuset check in fallback_alloc
  shmdt: use i_size_read() instead of ->i_size
  ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
  ipc/msg: increase MSGMNI, remove scaling
  ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
  ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
  lib/decompress.c: consistency of compress formats for kernel image
  decompress_bunzip2: off by one in get_next_block()
  usr/Kconfig: make initrd compression algorithm selection not expert
  fault-inject: add ratelimit option
  ratelimit: add initialization macro
  ...

Signed-off-by: NSeongJae Park <sj38.park@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__get_cpu_var was removed. Update comments to refer to
this_cpu_ptr() instead.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the documentation to reflect changes due to the availability of
this_cpu operations.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No user is left in the kernel source tree.  Therefore we can drop the
definitions.

This is the final merge of the transition away from __get_cpu_var.  After
this patch the kernel will not build if anyone uses __get_cpu_var.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

destroy_list is used to track marks which still need waiting for srcu
period end before they can be freed.  However by the time mark is added to
destroy_list it isn't in group's list of marks anymore and thus we can
reuse fsnotify_mark->g_list for queueing into destroy_list.  This saves
two pointers for each fsnotify_mark.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a lot of common code in inode and mount marks handling.  Factor it
out to a common helper function.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fanotify and the inotify API can be used to monitor changes of the
file system.  System call fallocate() modifies files.  Hence it should
trigger the corresponding fanotify (FAN_MODIFY) and inotify (IN_MODIFY)
events.  The most interesting case is FALLOC_FL_COLLAPSE_RANGE because
this value allows to create arbitrary file content from random data.

This patch adds the missing call to fsnotify_modify().

The FAN_MODIFY and IN_MODIFY event will be created when fallocate()
succeeds.  It will even be created if the file length remains unchanged,
e.g.  when calling fanotify with flag FALLOC_FL_KEEP_SIZE.

This logic was primarily chosen to keep the coding simple.

It resembles the logic of the write() system call.

When we call write() we always create a FAN_MODIFY event, even in the case
of overwriting with identical data.

Events FAN_MODIFY and IN_MODIFY do not provide any guarantee that data was
actually changed.

Furthermore even if if the filesize remains unchanged, fallocate() may
influence whether a subsequent write() will succeed and hence the
fallocate() call may be considered a modification.

The fallocate(2) man page teaches: After a successful call, subsequent
writes into the range specified by offset and len are guaranteed not to
fail because of lack of disk space.

So calling fallocate(fd, FALLOC_FL_KEEP_SIZE, offset, len) may result in
different outcomes of a subsequent write depending on the values of offset
and len.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@parisplace.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kmemleak will add allocations as objects to a pool.  The memory allocated
for each object in this pool is periodically searched for pointers to
other allocated objects.  This only works for memory that is mapped into
the kernel's virtual address space, which happens not to be the case for
most CMA regions.

Furthermore, CMA regions are typically used to store data transferred to
or from a device and therefore don't contain pointers to other objects.

Without this, the kernel crashes on the first execution of the
scan_gray_list() because it tries to access highmem.  Perhaps a more
appropriate fix would be to reject any object that can't map to a kernel
virtual address?

[akpm@linux-foundation.org: add comment]
[akpm@linux-foundation.org: fix comment, per Catalin]
[sfr@canb.auug.org.au: include linux/io.h for phys_to_virt()]
Signed-off-by: NThierry Reding <treding@nvidia.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we fail to allocate from the current node's stock, we look for free
objects on other nodes before calling the page allocator (see
get_any_partial).  While checking other nodes we respect cpuset
constraints by calling cpuset_zone_allowed.  We enforce hardwall check.
As a result, we will fallback to the page allocator even if there are some
pages cached on other nodes, but the current cpuset doesn't have them set.
 However, the page allocator uses softwall check for kernel allocations,
so it may allocate from one of the other nodes in this case.

Therefore we should use softwall cpuset check in get_any_partial to
conform with the cpuset check in the page allocator.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NZefan Li <lizefan@huawei.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fallback_alloc is called on kmalloc if the preferred node doesn't have
free or partial slabs and there's no pages on the node's free list
(GFP_THISNODE allocations fail).  Before invoking the reclaimer it tries
to locate a free or partial slab on other allowed nodes' lists.  While
iterating over the preferred node's zonelist it skips those zones which
hardwall cpuset check returns false for.  That means that for a task bound
to a specific node using cpusets fallback_alloc will always ignore free
slabs on other nodes and go directly to the reclaimer, which, however, may
allocate from other nodes if cpuset.mem_hardwall is unset (default).  As a
result, we may get lists of free slabs grow without bounds on other nodes,
which is bad, because inactive slabs are only evicted by cache_reap at a
very slow rate and cannot be dropped forcefully.

To reproduce the issue, run a process that will walk over a directory tree
with lots of files inside a cpuset bound to a node that constantly
experiences memory pressure.  Look at num_slabs vs active_slabs growth as
reported by /proc/slabinfo.

To avoid this we should use softwall cpuset check in fallback_alloc.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NZefan Li <lizefan@huawei.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrew Morton noted

	http://lkml.kernel.org/r/20141104142027.a7a0d010772d84560b445f59@linux-foundation.org

that the shmdt uses inode->i_size outside of i_mutex being held.
There is one more case in shm.c in shm_destroy().  This converts
both users over to use i_size_read().
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a highly-contrived scenario.  But, a single shmdt() call can be
induced in to unmapping memory from mulitple shm segments.  Example code
is here:

	http://www.sr71.net/~dave/intel/shmfun.c

The fix is pretty simple: Record the 'struct file' for the first VMA we
encounter and then stick to it.  Decline to unmap anything not from the
same file and thus the same segment.

I found this by inspection and the odds of anyone hitting this in practice
are pretty darn small.

Lightly tested, but it's a pretty small patch.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: NDavidlohr Bueso <dave@stgolabs.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SysV can be abused to allocate locked kernel memory.  For most systems, a
small limit doesn't make sense, see the discussion with regards to SHMMAX.

Therefore: increase MSGMNI to the maximum supported.

And: If we ignore the risk of locking too much memory, then an automatic
scaling of MSGMNI doesn't make sense.  Therefore the logic can be removed.

The code preserves auto_msgmni to avoid breaking any user space applications
that expect that the value exists.

Notes:
1) If an administrator must limit the memory allocations, then he can set
MSGMNI as necessary.

Or he can disable sysv entirely (as e.g. done by Android).

2) MSGMAX and MSGMNB are intentionally not increased, as these values are used
to control latency vs. throughput:
If MSGMNB is large, then msgsnd() just returns and more messages can be queued
before a task switch to a task that calls msgrcv() is forced.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a)

SysV can be abused to allocate locked kernel memory.  For most systems, a
small limit doesn't make sense, see the discussion with regards to SHMMAX.

Therefore: Increase the sysv sem limits so that all known applications
will work with these defaults.

b)

With regards to the maximum supported:
Some of the specified hard limits are not correct anymore, therefore the
patch updates the documentation.

- SEMMNI must stay below IPCMNI, which is 32768.
  As for SHMMAX: Stay a bit below this limit.

- SEMMSL was limited to 8k, to ensure that the kmalloc for the kernel array
  was limited to 16 kB (order=2)

  This doesn't apply anymore:
   - the allocation size isn't sizeof(short)*nsems anymore.
   - ipc_alloc falls back to vmalloc

- SEMOPM should stay below 1000, to limit the kmalloc in semtimedop() to an
  order=1 allocation.
  Therefore: Leave it at 500 (order=0 allocation).

Note:
If an administrator must limit the memory allocations, then he can set the
values as necessary.

Or he can disable sysv entirely (as e.g. done by Android).
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: NRafael Aquini <aquini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I fixed bugs in the sem_lock() logic, I was more conservative than
necessary.  Therefore it is safe to replace the smp_mb() with smp_rmb().
And: With smp_rmb(), semop() syscalls are up to 10% faster.

The race we must protect against is:

	sem->lock is free
	sma->complex_count = 0
	sma->sem_perm.lock held by thread B

thread A:

A: spin_lock(&sem->lock)

			B: sma->complex_count++; (now 1)
			B: spin_unlock(&sma->sem_perm.lock);

A: spin_is_locked(&sma->sem_perm.lock);
A: XXXXX memory barrier
A: if (sma->complex_count == 0)

Thread A must read the increased complex_count value, i.e. the read must
not be reordered with the read of sem_perm.lock done by spin_is_locked().

Since it's about ordering of reads, smp_rmb() is sufficient.

[akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr]
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Reviewed-by: NDavidlohr Bueso <dave@stgolabs.net>
Acked-by: NRafael Aquini <aquini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Magic number of compress formats for kernel image is defined by two bytes.
 These numbers are written in hexadecimal number, nevertheless magic
number for only gunzip is written in octal number.  The formats should be
consistent for readability.  Therefore, magic numbers for gunzip are also
defined by hexadecimal number.
Signed-off-by: NHaesung Kim <matia.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"origPtr" is used as an offset into the bd->dbuf[] array.  That array is
allocated in start_bunzip() and has "bd->dbufSize" number of elements so
the test here should be >= instead of >.

Later we check "origPtr" again before using it as an offset so I don't
know if this bug can be triggered in real life.

Fixes: bc22c17e ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel has support for (nearly) every compression algorithm known to
man, each to handle some particular microscopic niche.

Unfortunately all of these always get compiled in if you want to support
INITRDs, and can be only disabled when CONFIG_EXPERT is set.

I don't see why I need to set EXPERT just to properly configure the initrd
compression algorithms, and not always include every possible algorithm

Usually the initrd is just compressed with gzip anyways, at least that's
true on all distributions I use.

Remove the dependencies for initrd compression on CONFIG_EXPERT.

Make the various options just default y, which should be good enough to
not break any previous configuration.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current debug levels are not optimal.  Especially if one want to provoke
big numbers of faults(broken device simulator) then any verbose level will
produce giant numbers of identical logging messages.  Let's add ratelimit
parameter for that purpose.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Acked-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

linux kernel doesn't manage page sizes below 4kb.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Based on ext2_direct_IO

Tested with O_DIRECT file open and sysbench/mariadb with 1% written
queries improvement (update_non_index test) on a volume created with
mkaffs.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

-Remove ErrorBuffer and use %pV

-Add __printf to enable argument mistmatch warnings

Original patch by Joe Perches.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

-Move file_operations to avoid forward declarations.

-Remove unused declarations.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.

set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary KERN_ERR from pr_err() within kexec.c.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDavid Drysdale <drysdale@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDavid Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Hook up x86-64, i386 and x32 ABIs.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset adds execveat(2) for x86, and is derived from Meredydd
Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528).

The primary aim of adding an execveat syscall is to allow an
implementation of fexecve(3) that does not rely on the /proc filesystem,
at least for executables (rather than scripts).  The current glibc version
of fexecve(3) is implemented via /proc, which causes problems in sandboxed
or otherwise restricted environments.

Given the desire for a /proc-free fexecve() implementation, HPA suggested
(https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be
an appropriate generalization.

Also, having a new syscall means that it can take a flags argument without
back-compatibility concerns.  The current implementation just defines the
AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be
added in future -- for example, flags for new namespaces (as suggested at
https://lkml.org/lkml/2006/7/11/474).

Related history:
 - https://lkml.org/lkml/2006/12/27/123 is an example of someone
   realizing that fexecve() is likely to fail in a chroot environment.
 - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered
   documenting the /proc requirement of fexecve(3) in its manpage, to
   "prevent other people from wasting their time".
 - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a
   problem where a process that did setuid() could not fexecve()
   because it no longer had access to /proc/self/fd; this has since
   been fixed.

This patch (of 4):

Add a new execveat(2) system call.  execveat() is to execve() as openat()
is to open(): it takes a file descriptor that refers to a directory, and
resolves the filename relative to that.

In addition, if the filename is empty and AT_EMPTY_PATH is specified,
execveat() executes the file to which the file descriptor refers.  This
replicates the functionality of fexecve(), which is a system call in other
UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and
so relies on /proc being mounted).

The filename fed to the executed program as argv[0] (or the name of the
script fed to a script interpreter) will be of the form "/dev/fd/<fd>"
(for an empty filename) or "/dev/fd/<fd>/<filename>", effectively
reflecting how the executable was found.  This does however mean that
execution of a script in a /proc-less environment won't work; also, script
execution via an O_CLOEXEC file descriptor fails (as the file will not be
accessible after exec).

Based on patches by Meredydd Luff.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When running FSX with direct I/O mode, fsx resulted in DATA past EOF issues.

  fsx ./file2 -Z -r 4096 -w 4096
  ...
  ..
  truncating to largest ever: 0x907c
  fallocating to largest ever: 0x11137
  truncating to largest ever: 0x2c6fe
  truncating to largest ever: 0x2cfdf
  fallocating to largest ever: 0x40000
  Mapped Read: non-zero data past EOF (0x18628) page offset 0x629 is 0x2a4e
  ...
  ..

The reason being, it is doing a truncate down, but the zeroing does not
happen on the last block boundary when offset is not aligned.  Even though
it calls truncate_setsize()->truncate_inode_pages()->
truncate_inode_pages_range() and considers the partial zeroout but it
retrieves the page using find_lock_page() - which only looks the page in
the cache.  So, zeroing out does not happen in case of direct IO.

Make a truncate page based around block_truncate_page for FAT filesystem
and invoke that helper to zerout in case the offset is not aligned with
the blocksize.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coverity id: 1042674
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>