These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.
Coalesce formats for easier grep.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

I did not receive a single bug report after interrupt support was
added for a limited number of chips. So I'd say the code is good and
should be enabled for all supported chips, that is: ICH5 and later.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>

Add support for probing slave devices parsed from the device tree.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch adds IPP subsystem-based gsc driver for exynos5 series.
GSC is stand for General SCaler and supports the following features:
- image scaler/rotator/crop/flip/csc and input/output DMA operations.
- image rotation and image effect functions.
- writeback and display output operations.
- M2M operation to crop, scale, rotation and csc.

The below is GSC hardware path:
Memory------->GSC------>Memory
FIMD--------->GSC------>HDMI
FIMD--------->GSC------>Memory
Memory------->GSC------>FIMD, Mixer

This driver is registered to IPP subsystem framework to be used by user side
and user can control the GSC hardware through some interfaces of IPP subsystem
framework.

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: NEunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: NJinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin.park <kyungmin.park@samsung.com>

This patch adds IPP subsystem-based rotator driver.
And Rotator supports the following features.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
  . as limitaions, the pixel format to source buffer should be
    same as the one to destination buffer and no scaler.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the Rotator hardware through some interfaces of IPP
subsystem framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: NEunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: NYoungjun Cho <yj44.cho@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

FIMC is stand for Fully Interfactive Mobile Camera and
supports image scaler/rotator/crop/flip/csc and input/output DMA operations
and also supports writeback and display output operations.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the FIMC hardware through some interfaces of IPP subsystem
framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- add comments, code fixups and cleanups.
Signed-off-by: NEunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: NJinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch adds iommu support for IPP subsystem framework.
For this, it adds subdrv_probe/remove callback to enable or
disable ipp iommu.
We can get or put device address to a gem handle from user
through exynos_drm_gem_get/put_dma_addr().
Signed-off-by: NEunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: NJinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch adds Image Post Processing(IPP) support for exynos drm driver.

IPP supports image scaler/rotator and input/output DMA operations
using IPP subsystem framework to control FIMC, Rotator and GSC hardware
and supports some user interfaces for user side.

And each IPP-based drivers support Memory to Memory operations
with various converting. And in case of FIMC hardware, it also supports
Writeback and Display output operations through local path.

Features:
- Memory to Memory operation support.
- Various pixel formats support.
- Image scaling support.
- Color Space Conversion support.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
- Writeback operation support to display blended image of FIMD fifo on screen

A summary to IPP Subsystem operations:
First of all, user should get property capabilities from IPP subsystem
and set these properties to hardware registers for desired operations.
The properties could be pixel format, position, rotation degree and
flip operation.

And next, user should set source and destination buffer data using
DRM_EXYNOS_IPP_QUEUE_BUF ioctl command with gem handles to source and
destinition buffers.

And next, user can control user-desired hardware with desired operations
such as play, stop, pause and resume controls.

And finally, user can aware of dma operation completion and also get
destination buffer that it contains user-desried result through dequeue
command.

IOCTL commands:
- DRM_EXYNOS_IPP_GET_PROPERTY
  . get ipp driver capabilitis and id.
- DRM_EXYNOS_IPP_SET_PROPERTY
  . set format, position, rotation, flip to source and destination buffers
- DRM_EXYNOS_IPP_QUEUE_BUF
  . enqueue/dequeue buffer and make event list.
- DRM_EXYNOS_IPP_CMD_CTRL
  . play/stop/pause/resume control.

Event:
- DRM_EXYNOS_IPP_EVENT
  . a event to notify dma operation completion to user side.

Basic control flow:
Open -> Get properties -> User choose desired IPP sub driver(FIMC, Rotator
or GSCALER) -> Set Property -> Create gem handle -> Enqueue to source and
destination buffers -> Command control(Play) -> Event is notified to User
-> User gets destinition buffer complated -> (Enqueue to source and
destination buffers -> Event is notified to User) * N -> Queue/Dequeue to
source and destination buffers -> Command control(Stop) -> Free gem handle
-> Close

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: NEunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: NJinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This adds the of_match_table to exynos-drm fimd driver to be probed from
the device tree.

Changelog v2:
- fix build error without CONFIG_OF.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Since 0d0b3e74
drm/radeon: use cached memory when evicting for vram on non agp

evicting from TTM would try and evict to TTM instead of system,
not so good.

This should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58272Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

non-mem-to-mem transfers require dw aligned byte count.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This enables the functionality added in the previous
patches.  Userspace acceleration drivers can use the
CS ioctl to submit command buffers to the async DMA
rings.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us to use async DMA from userspace.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.

v2: fix address bounds checking
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.

v2: fix address bounds checking, reloc indexing
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the size computation of the htile buffer.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to hold bdev->fence_lock while grabbing a reference to
the fence, to prevent concurrent clearing/changing of the
ttm_bo->sync_obj field.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With the new per-crtc locking mutliple set-cursor calls could happen
in parallel. Out of sheer paranoia I've opted for an irqsave spinlock.
But if there's indeed an access from interrupt contexts to these regs
it's already broken with the old code, so this can likely just be
reduced to a normal spinlock. Otoh the pageflip completion happens
from the vblank irq handler ...
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just refactoring to make the next patche simpler. Now all indirect register
access in the new modesetting driver should go through the r100_mm_(w|r)reg
fucntions.

RADEON_READ_MM from the old driver seems to be totally unused, so just kill
it.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Following oops were observed when disk error happened:

[ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code
[ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00
[ 4272.896951] end_request: I/O error, dev sda, sector 5955239
[ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4291.658305] IP: [] ahci_activity_show+0x1/0x40
[ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0
[ 4291.783408] Oops: 0000 [#1] SMP
[ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity
[ 4291.934235] CPU 9
[ 4291.958301] Pid: 27942, comm: hwinfo ......

ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL.
Signed-off-by: NXiaotian Feng <dannyfeng@tencent.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Using ata_link_warn() instead of ata_link_printk().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Using ata_dev_info() instead of ata_dev_printk().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Using ata_<foo>_<level>() instead of ata_<foo>_printk().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

These structs are used only for ahci_platform.c, so they should be
static. Thanks to Fengguang for the (automated) suggestion.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This reverts commit 1645bf1b.

Brian Norris writes:
  > David Daney writes:

  > I can seem to find it.  Without knowing what that does, I would be inclined
  > to NACK the whole thing.

  A NACK is probably the right thing. I was mostly converting a few
  other drivers which used some simple, common patterns to use my new
  common code, but this driver was missing it altogether. It looks like
  there may be bigger issues, though, as you point out.

  > This patch is likely to be incomplete as the driver is also missing the
  > module_exit() things.
  >
  > It might be simpler to just make the driver "bool" instead of "tristate" in
  > the Kconfig.

  As noted earlier, I don't have much interest in this driver. I agree
  that there are some other issues with the driver; I think it leaks
  memory if it is ever allowed to unload, for one. Feel free to submit
  an alternative patch to prevent this driver from being built as a
  module.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This reverts commit de90cd71.

Shane Huang writes:

  Please suspend this patch because I just received two new
  DevSlp drives but found word 78 bit 5 is _not_ set.

  I'm checking with the drive vendor whether he gave me
  the wrong information. If bit 5 is not the necessary and
  sufficient condition, I will implement another patch to
  replace ata_device->sata_settings into ->devslp_timing.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The fimd of exynos5 SoC supports extended screen coordinate.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The x, y coordinates of right bottom pixel cannot be negative numbers.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There is no any reason to change fb offset when CRTC is out of screen.
Also, this fixes a typing error.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This is an unlikely case. However to silence the following smatch error
add a NULL check:
drivers/gpu/drm/exynos/exynos_hdmi.c:2486 hdmi_probe()
error: potential NULL dereference 'match'.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Add CONFIG_OF to compile conditionally. of_match_ptr eliminates having
an #ifdef returning NULL for the case when OF is disabled.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds support for controlling power of hdmi phy for
exynos5 soc. A special bit is provided in exynos5 for directly
switching of PHY while in exynos4, phy power needs to be controlled
through i2c settings. I2C configuration may affect the suspend to
resume and wake-up time requirements hence not added.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds support for runtime power management for
drm mixer driver.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds runtime power management support for exynos drm
hdmi driver.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NShirish S <s.shirish@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch fixes memory alloction(contiguous or not) and
cache mapping types(cachable or not).
For this, it converts each type from user request into dma
attribute properly.

Changelog v2:
- just code cleanup.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

For user framebuffers it's easier to just inline the
exynos_drm_framebuffer_init helper instead of trying to adjust it -
most of the things that helper sets up need to be overwritten anyway
again due to the multiple backing storage objects support exynos has,
but does not use for the fbdev.

Changelog v2:
- fix NULL point issue to first gem object of exynos drm framebuffer.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Thanks for reviews, looking a lot better.

---- 8< ----

Initiator access config could be easier. The way other storage vendors
have addressed this is to support initiator groups: the admin adds
initiator WWNs to the group, and then LUN permissions can be granted for
the entire group at once.

Instead of changing ktarget's configfs interface, this patch keeps
the configfs interface per-initiator-wwn and just adds a 'tag' field
for each. This should be enough for user tools like targetcli to group
initiator ACLs and sync their configurations.

acl_tag is not used internally, but needs to be kept in configfs so that
all user tools can avoid dependencies on each other.

Code tested to work, although userspace pieces still to be implemented.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>