The variable recv_sockets is only used in the file rxe_net.c. So
it is better to add static type to it.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Merging in 12 patch series from Bart that required changes in the
current for-rc branch in order to apply cleanly.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since all I/O context state changes are already serialized, it is
not necessary to protect I/O context state changes with the I/O
context spinlock. Hence remove that spinlock.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It is not necessary to obtain ioctx->spinlock when reading the ioctx
state. Since after removal of this locking only a single line remains,
inline the srpt_get_cmd_state() function.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Introduce a function for converting a GUID into an ASCII string. This
patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Disabling an SRP target port causes the state of all QPs associated
with a port to be changed into IB_QPS_ERR. Avoid that this causes
one error message per I/O context to be reported.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

At least when running the ib_srpt driver on top of the rdma_rxe
driver it is easy to trigger a zero-length write completion in
the CH_DISCONNECTED state. Hence make the message that reports
this less noisy.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Make the ib_srpt driver use the IPv6 format for GIDs in log messages
to improve consistency of this driver with other RDMA kernel drivers.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Verify whether port numbers are in the expected range before using
these as an array index. Complain if a port number is out of range.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since the SRQ event message is only useful for debugging purposes,
reduce its severity from "informational" to "debug".
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Rename rsp_size into max_rsp_size and SRPT_RQ_SIZE into MAX_SRPT_RQ_SIZE.
The new names better reflect the role of this member variable and constant.
Since the prefix "srp_" is superfluous in the context of the function
that creates an RDMA channel, rename srp_sq_size into sq_size.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch avoids that the following command reports any warnings:

scripts/kernel-doc -none drivers/infiniband/ulp/srpt/ib_srpt.h
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that warnings about missing parameter descriptions are reported
when building with W=1.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fixes: commit a42d985b ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the current capability to the max capability. Doing so enables dual
port RoCE functionality if supported by the firmware.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When operating in dual port RoCE mode FW doesn't support steering for
raw QPs on the slave port. They still work on the master port, but
the user has no way of knowing which port is the master. The
capability is reported per device, not per port.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Route performance query MADs to the correct mlx5_core_dev when using
dual port RoCE mode.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When in dual port mode setting a RoCE GID for any port flows through the
master ports mlx5_core_dev. Provide an interface to set the port when
sending this command.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update the counter interface for multiple ports. Some counter sets
always comes from the primary device.

Port specific counters should be accessed per mlx5_core_dev not always
through the IB master mdev.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When there are multiple ports for single IB(RoCE) device, support
debugfs entries to be available for each port.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Port operations must be routed to their native mlx5_core_dev. A
multiport RoCE device registers itself as having 2 ports even before a
2nd port is affiliated. If an unaffilated port is queried use capability
information from the master port, these values are the same.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Because mlx5_ib_event can be called from atomic context move event
handling onto a workqueue. A mutex lock is required to get the IB device
for slave ports, so move event processing onto a work queue. When an IB
event is received, check if the mlx5_core_dev  is a slave port, if so
attempt to get the IB device it's affiliated with. If found process the
event for that device, otherwise return.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.

If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.

Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.

The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.

In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove use of the num_ports general capability throughout. The number of
ports will be variable in the future, and reported in a different way.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It always returns 0. Change return type to void.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Generate a unique 128bit identifier for each host and pass that value to
firmware in the INIT_HCA command if it reports the sw_owner_id
capability. Each device bound to the mlx5_core driver will have the same
software owner ID.

In subsequent patches mlx5_core devices will be bound via a new VPort
command so that they can operate together under a single InfiniBand
device. Only devices that have the same software owner ID can be bound,
to prevent traffic intended for one host arriving at another.

The INIT_HCA command length was expanded by 128 bits. The command
length is provided as an input FW commands. Older FW does not have a
problem receiving this command in the new longer form.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There are two potential problems with the existing implementation.

1. Enable and disable can race after the atomic operations.
2. If a command fails the refcount is left in an inconsistent state.

Introduce a lock and perform error checking.

Fixes: a6f7d2af ("net/mlx5: Add support for multiple RoCE enable")
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.

The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.

A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

DC Initiator (DCI) QP is represented like any other QP in the hardware.
However, like any other transport QP there are attributes and settings
that are special to DCI QP and needs specific attention and care.
Make necessary changes to configure DCI QP.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.

Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().

Downstream patches from this series will add support for both DCI and
DCT driver QPs.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Vendors can implement type of QPs that are not described in the
InfiniBand specification. To still be able to use the IB/core layer
services (e.g. user object management) without tainting this layer with
driver proprietary logic, a new QP type is added - IB_QPT_DRIVER. This
will be a general QP type that the core layer doesn't know about its true nature.
When a command like create_qp() is passed to a hardware driver the extra
data that is required is taken from the driver channel.
Downstream patches from this series will use that QP type in the mlx5
driver.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable DC transport in the firmware to provide its functionality.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a missing command interface to work with a DCT. It includes: creating,
destroying and get events for.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Reporting that a device doesn't support RoCE seems like a valuable piece
of information to have when trying to determine why a driver is not binding
to a device. Better to report this at info log level instead of requiring
a user to enable all debug messages in the driver.
Signed-off-by: NJonathan Toppins <jtoppins@redhat.com>
Acked-By: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The cases for FDR/EDR signalling speed, were missing in
ib_rate_to_mult and mult_to_ib_rate giving wrong return values when
drivers convert static rate to/from inter-packet-delay.
Signed-off-by: NHans Westgaard Ry <hans.westgaard.ry@oracle.com>
Reviewed-by: NHåkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

i40iw_wait_pe_ready is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with msleep,
to reduce busy wait.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds static trace for RNRNAK timer. Currently the output from
hrtimer static trace only shows the addresses of hrtimers in the system
and there is no easy way to correlate an RNRNAK timer with its entries in
the hrtimer trace. This patch adds the correlation among a QP, its RNRNAK
timer, and its entries in the hrtimer trace. This correlation will be
enormously helpful when debugging RNRNAK related issues. In addition, this
patch cleans up rvt_stop_rnr_timer() to be void while here.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The get_unit_name() function crafts a string based on the device name
and the device unit number.  It then stores this in a static variable.

This has concurrency issues as can be seen with this log:

hfi1 0000:02:00.0: hfi1_1: read_idle_message: read idle message 0x203
hfi1 0000:01:00.0: hfi1_1: read_idle_message: read idle message 0x203

The PCI device ID (0000:02:00.0 vs. 0000:01:00.0) is correct for the
message, but the device string hfi1_1 is incorrect (it should be
hfi1_0 for the second log message).

Remove get_unit_name() function.

Instead, use the rvt accessor rvt_get_ibdev_name() to get the IB name
string.

Clean up any hfi1_early_xx calls that can now use the new path.

QIB has the same (qib_get_unit_name()) issue.  Updating as necessary.

Remove qib_get_unit_name() function.

Update log message that has redundant device name.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

CQ allocation does not ensure that completion queue entries
and the completion queue structure are allocated on the correct
numa node.

Fix by allocating the rvt_cq and kernel CQ entries on the device node,
leaving the user CQ entries on the default local node.  Also ensure
CQ resizes use the correct allocator when extending a CQ.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>