Initial commit for the driver for the DiB7000M COFDM demodulator.
Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for the advanced debugging ioctls, to allow access to the
cx88 registers from userspace.  Only i2c_id == 0 is supported, for access
to the cx88 adapter itself.  There isn't any support for access to I2C
clients of the adapter.  Most of them don't have R/W registers anyway,
and its necessary to use i2c-dev to talk to them from userspace.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

correct AVerMedia Volar USB ID
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq
Signed-off-by: NKars de Jong <jongk@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sun3 scsi drivers compile/work again (though with way too many warnings...)

Tested on 3/50, 3/60.
Signed-off-by: NSam Creasey <sammy@sammy.net>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- 7990: request_irq() should have SA_SHIRQ flag set
- hplance_init() printed dev->name before register_netdev() had filled it in
Signed-off-by: NKars de Jong <jongk@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Only the callsign but not the SSID part of an AX.25 address is ASCII
based but Linux by initializes the SSID which should be just a 4-bit
number from ASCII anyway.

Fix that and convert the code to use a shared constant for both default
addresses.  While at it, use the same style for null_ax25_address also.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a missing error check spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This modifies Makefiles and Kconfigs to properly reflect the creation of
generic HID layer.

It also removes the dependency of BROKEN, which was introduced by the
first patch in series (see the comment). Also updates credits.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pb_fnmode parameter has to be passed to usbhid, both for compatibility reasons
and also because it logically belongs there.

Also removes empty hid-input.c file in drivers/usb/input.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

hid_input_report() was needlessly USB-specific in USB HID. This patch
makes the function independent of HID implementation and fixes all
the current users. Bluetooth patches comply with this prototype.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- hiddev is USB-only (agreed with Marcel Holtmann that Bluetooth currently
  doesn't need it, and future planned interface (rawhid) will be more flexible
  and usable)
- both HID and USB-hid can be now compiled as modules (wasn't possible before
  hiddev was fully separated from generic HID layer)
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- 'dev' in struct hid_device changed from struct usb_device to
  struct device and fixed all the users
- renamed functions which are part of USB HID API from 'hid_*' to
  'usbhid_*'
- force feedback initialization moved from common part into USB-specific
  driver
- added usbhid.h header for USB HID API users
- removed USB-specific fields from struct hid_device and moved them
  to new usbhid_device, which is pointed to by hid_device->driver_data
- fixed all USB users to use this new structure
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- fixed generic API (added neccessary EXPORT_SYMBOL, fixed hid.h to provide correct
  prototypes)
- extended hid_device with open/close/event function pointers to driver-specific
  functions
- added driver specific driver_data to hid_device
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The "big main" split of USB HID code into generic HID code and
USB-transport specific HID handling.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is a part of generic HID layer introduction. USB HID is
disabled, so that the code split and changes could be introduced in a
way that is reviewable (i.e. separate patches), but not to break git
bisect by uncompilable kernel throughout different stages of the code
splitup and changes. The last patch of this series enables HID again.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reset sync_search on resume.  The effect is to retry syncing all out-of-sync
regions when a mirror is resumed, including ones that previously failed.
Signed-off-by: NJonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The complete_resync_work function only provides the ability to change an
out-of-sync region to in-sync.  This patch enhances the function to allow us
to change the status from in-sync to out-of-sync as well, something that is
needed when a mirror write to one of the devices or an initial resync on a
given region fails.
Signed-off-by: NJonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the code that releases memory used by a snapshot into a separate function.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement the pushback feature for the multipath target.

The pushback request is used when:
  1) there are no valid paths;
  2) queue_if_no_path was set;
  3) a suspend is being issued with the DMF_NOFLUSH_SUSPENDING flag.
     Otherwise bios are returned to applications with -EIO.

To check whether queue_if_no_path is specified or not, you need to check
both queue_if_no_path and saved_queue_if_no_path, because presuspend saves
the original queue_if_no_path value to saved_queue_if_no_path.

The check for 1 already exists in both map_io() and do_end_io().
So this patch adds __must_push_back() to check 2 and 3.

Test results:
See the test results in the preceding patch.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In device-mapper I/O is sometimes queued within targets for later processing.
For example the multipath target can be configured to store I/O when no paths
are available instead of returning it -EIO.

This patch allows the device-mapper core to instruct a target to transfer the
contents of any such in-target queue back into the core.  This frees up the
resources used by the target so the core can replace that target with an
alternative one and then resend the I/O to it.  Without this patch the only
way to change the target in such circumstances involves returning the I/O with
an error back to the filesystem/application.  In the multipath case, this
patch will let us add new paths for existing I/O to try after all the existing
paths have failed.

    DMF_NOFLUSH_SUSPENDING
    ----------------------

If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the
DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend().  It
is always cleared before dm_suspend() returns.

The flag must be visible while the target is flushing pending I/Os so it
is set before presuspend where the flush starts and unset after the wait
for md->pending where the flush ends.

Target drivers can check this flag by calling dm_noflush_suspending().

    DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE
    -----------------------------------

A target's map() function can now return DM_MAPIO_REQUEUE to request the
device mapper core queue the bio.

Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request
the same.  This has been labelled 'pushback'.

The __map_bio() and clone_endio() functions in the core treat these return
values as errors and call dec_pending() to end the I/O.

    dec_pending
    -----------

dec_pending() saves the pushback request in struct dm_io->error.  Once all
the split clones have ended, dec_pending() will put the original bio on
the md->pushback list.  Note that this supercedes any I/O errors.

It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while
in progress (e.g. by user interrupt).  dec_pending() checks for this and
returns -EIO if it happened.

    pushdback list and pushback_lock
    --------------------------------

The bio is queued on md->pushback temporarily in dec_pending(), and after
all pending I/Os return, md->pushback is merged into md->deferred in
dm_suspend() for re-issuing at resume time.

md->pushback_lock protects md->pushback.
The lock should be held with irq disabled because dec_pending() can be
called from interrupt context.

Queueing bios to md->pushback in dec_pending() must be done atomically
with the check for DMF_NOFLUSH_SUSPENDING flag.  So md->pushback_lock is
held when checking the flag.  Otherwise dec_pending() may queue a bio to
md->pushback after the interrupted dm_suspend() flushes md->pushback.
Then the bio would be left in md->pushback.

Flag setting in dm_suspend() can be done without md->pushback_lock because
the flag is checked only after presuspend and the set value is already
made visible via the target's presuspend function.

The flag can be checked without md->pushback_lock (e.g. the first part of
the dec_pending() or target drivers), because the flag is checked again
with md->pushback_lock held when the bio is really queued to md->pushback
as described above.  So even if the flag is cleared after the lockless
checkings, the bio isn't left in md->pushback but returned to applications
with -EIO.

    Other notes on the current patch
    --------------------------------

- md->pushback is added to the struct mapped_device instead of using
  md->deferred directly because md->io_lock which protects md->deferred is
  rw_semaphore and can't be used in interrupt context like dec_pending(),
  and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too.

- Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG
  ioctl option is specified, because I/Os generated by lock_fs() would be
  pushed back and never return if there were no valid devices.

- If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING
  flag is set, md->pushback must be flushed because I/Os may be queued to
  the list already.  (flush_and_out label in dm_suspend())

    Test results
    ------------

I have tested using multipath target with the next patch.

The following tests are for regression/compatibility:
  - I/Os succeed when valid paths exist;
  - I/Os fail when there are no valid paths and queue_if_no_path is not
    set;
  - I/Os are queued in the multipath target when there are no valid paths and
    queue_if_no_path is set;
  - The queued I/Os above fail when suspend is issued without the
    DM_NOFLUSH_FLAG ioctl option.  I/Os spanning 2 multipath targets also
    fail.

The following tests are for the normal code path of new pushback feature:
  - Queued I/Os in the multipath target are flushed from the target
    but don't return when suspend is issued with the DM_NOFLUSH_FLAG
    ioctl option;
  - The I/Os above are queued in the multipath target again when
    resume is issued without path recovery;
  - The I/Os above succeed when resume is issued after path recovery
    or table load;
  - Queued I/Os in the multipath target succeed when resume is issued
    with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os
    spanning 2 multipath targets also succeed.

The following tests are for the error paths of the new pushback feature:
  - When the bdget_disk() fails in dm_suspend(), the
    DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the
    pushback list are flushed properly.
  - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted,
      o I/Os which had already been queued to the pushback list
        at the time don't return, and are re-issued at resume time;
      o I/Os which hadn't been returned at the time return with EIO.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide a dm ioctl option to request noflush suspending.  (See next patch for
what this is for.) As the interface is extended, the version number is
incremented.

Other than accepting the new option through the interface, There is no change
to existing behaviour.

Test results:
Confirmed the option is given from user-space correctly.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update existing targets to use the new symbols for return values from target
map and end_io functions.

There is no effect on behaviour.

Test results:
Done build test without errors.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tighten the use of return values from the target map and end_io functions.
Values of 2 and above are now explictly reserved for future use.  There are no
existing targets using such values.

The patch has no effect on existing behaviour.

o Reserve return values of 2 and above from target map functions.
  Any positive value currently indicates "mapping complete", but all
  existing drivers use the value 1.  We now make that a requirement
  so we can assign new meaning to higher values in future.

  The new definition of return values from target map functions is:
      < 0 : error
      = 0 : The target will handle the io (DM_MAPIO_SUBMITTED).
      = 1 : Mapping completed (DM_MAPIO_REMAPPED).
      > 1 : Reserved (undefined).  Previously this was the same as '= 1'.

o Reserve return values of 2 and above from target end_io functions
  for similar reasons.
  DM_ENDIO_INCOMPLETE is introduced for a return value of 1.

Test results:

  I have tested by using the multipath target.

  I/Os succeed when valid paths exist.

  I/Os are queued in the multipath target when there are no valid paths and
queue_if_no_path is set.

  I/Os fail when there are no valid paths and queue_if_no_path is not set.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the interface of dm_suspend() so that we can pass several options
without increasing the number of parameters.  The existing 'do_lockfs' integer
parameter is replaced by a flag DM_SUSPEND_LOCKFS_FLAG.

There is no functional change to the code.

Test results:
I have tested 'dmsetup suspend' command with/without the '--nolockfs'
option and confirmed the do_lockfs value is correctly set.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary spaces in dm.c.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The existing code allocates an extra slot in bi_io_vec[] and uses it to store
the region number.

This patch hides the extra slot from bio_add_page() so the region number can't
get overwritten.

Also remove a hard-coded SECTOR_SHIFT and fix a typo in a comment.
Signed-off-by: NHeinz Mauelshagen <hjm@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This code is '#if 0'ed.  Anyway if anyone wants to dump neo registers
better to have it fixed.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove broken and unused macro.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Automatically set VIDEO_SELECT when you select VESA FB.  Currently if you
select VESA FB with fbcon but don't select VGA console the box will not
have its video mode set.  Thus you get a blank screen.
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For Geode devices without a flatpanel aware BIOS, this enables the flatpanel
power and data.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the right MSR and bits to detect if the GX is strapped for TFT or CRT
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for command line options for setting the mode and various
settings.

[akpm@osdl.org: cleanups]
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Support TFT panels by correctly setting up the flat panel registers

[akpm@osdl.org: cleanups]
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We cannot assume that the BIOS will be correctly setting up the hardware, so
set some bits in various display registers to enable video output.  Allow an
advanced user to specify a frambuffer size, rather then probing the BIOS.  All
of these fixes were prompted by the OLPC effort.

[akpm@osdl.org: cleanups]
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the Geode GX BIOS virtual registers to get the actual size of the
framebuffer.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ACPI drivers like ibm-acpi are moving to the backlight sysfs
infrastructure.  During ibm-acpi testing, I have noticed that
backlight_device_unregister() sets the display brightness and power to
zero.

This causes the display to be dimmed on ibm-acpi module removal.  It will
affect all other ACPI drivers that are being converted to use the backlight
class, as well.  It also affects a number of framebuffer devices that are
used on desktops and laptops which might also not want such behaviour.

Since working around this behaviour requires undesireable hacks, Richard
Purdie decided that we would be better off reverting the changes in the
sysfs class, and adding the code to dim and power off the backlight device
to the drivers that want it.  This patch is my attempt to do so.

Patch against latest linux-2.6.git.  Changes untested, as I lack the
required hardware.  Still, they are trivial enough that, apart from typos,
there is little chance of getting them wrong.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some possible unaligned accesses when accessing fields of 'image'
pointer.  Indeed this pointer was obtained by allocating a block of memory
that embeds a temporary array plus an image structure.  The temporary
buffer was located at the start of the allocated block and depending on its
size, the image structure which comes right after can be unaligned.

For example when using mini fonts (4x6) (cursor's width is 4 and its height
is 6) the temporary buf size is 6 bytes.

Therefore this patch moves the image structure to the start of the block
and moves the temporary buffer right after.  It makes 'image' pointer
always aligned and since the tempo buf is a buffer of char, it's always
correctly aligned as well.

It also fixes the file header alignement.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The backlight layer should be independent from the framebuffer layer.  It
can use the services offered by the framebuffer, but its absence should not
prevent the backlight/lcd layer from functioning.

[akpm@osdl.org: cleanups]
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>