We have moved the Ux500 over to use the generic DT based
cpufreq driver, so delete the old custom driver.

At the same time select CPUFREQ_DT from the machine's
Kconfig in order to satisfy the "default ARCH_U8500"
selection on the old driver.
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The ARMSS clock, also known as the operating point of the
CPU, should not cross-depend on cpufreq like this. Move
the code to use just frequencies and remove the false
frequency (1GHz) and put in the actual frequency provided
by the ARMSS clock (998400000 Hz) as part of the process.

After this and the related cpufreq patch, the DB8500 will
simply use the standard DT cpufreq driver to change the
operating points through the common clock framework using
the ARMSS clock.
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This enables the generic DT and OPP-based cpufreq driver on the
ST-Ericsson Ux500 series.
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch adds the r8a7796 support the generic cpufreq driver
by adding an appropriate compat string. This is in keeping
with support for other Renesas ARM and arm64 based SoCs.
Signed-off-by: NKhiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
[simon: new changelog]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

policy->cpu is copied into policy->cpus in cpufreq_online() before
calling into cpufreq_driver->init(). So there's no need to set the
same in the individual driver init() functions again.

This patch removes the redundant setting of policy->cpu in policy->cpus
in intel_pstate and cppc drivers.
Reported-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

MT7622 is a 64-bit ARMv8 based dual-core SoC (2 * Cortex-A53) with a
single cluster. The hardware is also compatible with the current driver,
so add MT7622 as one of the compatible string list.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Since more MediaTek SoCs can be supported with the cpufreq driver and not
limited to MT8173, a couple of cleanups are done here with renaming those
functions and related structures with "mtk" instead of "mt8173".
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

After the commit "a399dc9f cpufreq: shmobile: Use generic platdev
driver", will use cpufreq-dt-platdev driver to enable cpufreq-dt support.
Hence, follow the implementation to support new R8A7795 SoC.
Signed-off-by: NKhiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch adds the rk3328 compatible string for supporting
the generic cpufreq driver on RK3328.
Signed-off-by: NFinley Xiao <finley.xiao@rock-chips.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

for_each_compatible_node performs an of_node_get on each iteration, so a
return from the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e,e1,e2;
statement S;
iterator i1;
iterator name for_each_compatible_node;
@@

 for_each_compatible_node(n,e1,e2) {
   ...
(
   of_node_put(n);
|
   e = n
|
   return n;
|
   i1(...,n,...) S
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Additionally, call of_node_put on the previous value of np, obtained from
of_find_compatible_node, that is no longer accessible at the point of the
for_each_compatible_node.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With the recent updates, CPUFREQ_ETERNAL is only used by the drivers
which don't know their transition latency but want to use dynamic
switching.

Anyway, the routine cpufreq_policy_transition_delay_us() caps the value
of transition latency to 10 ms now and that can be used safely with such
platforms.

Remove the check from cpufreq_init_governor() and allow dynamic
switching for such configurations as well.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The policy->transition_latency field is used for multiple purposes
today and its not straight forward at all. This is how it is used:

A. Set the correct transition_latency value.

B. Set it to CPUFREQ_ETERNAL because:
   1. We don't want automatic dynamic switching (with
      ondemand/conservative) to happen at all.
   2. We don't know the transition latency.

This patch handles the B.1. case in a more readable way. A new flag for
the cpufreq drivers is added to disallow use of cpufreq governors which
have dynamic_switching flag set.

All the current cpufreq drivers which are setting transition_latency
unconditionally to CPUFREQ_ETERNAL are updated to use it. They don't
need to set transition_latency anymore.

There shouldn't be any functional change after this patch.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There is no limitation in the ondemand or conservative governors which
disallow the transition_latency to be greater than 10 ms.

The max_transition_latency field is rather used to disallow automatic
dynamic frequency switching for platforms which didn't wanted these
governors to run.

Replace max_transition_latency with a boolean (dynamic_switching) and
check for transition_latency == CPUFREQ_ETERNAL along with that. This
makes it pretty straight forward to read/understand now.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

All users of arm_big_little driver are defining it and there is no need
to keep it optional.

Make it mandatory to remove the always true conditional statement.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The transition_latency field isn't used for drivers with ->setpolicy()
callback present and there is no point setting it from the drivers.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The policy->transition_delay_us field is used only by the schedutil
governor currently, and this field describes how fast the driver wants
the cpufreq governor to change CPUs frequency. It should rather be a
common thing across all governors, as it doesn't have any schedutil
dependency here.

Create a new helper cpufreq_policy_transition_delay_us() to get the
transition delay across all governors.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The cpufreq core and governors aren't supposed to set a limit on how
fast we want to try changing the frequency. This is currently done for
the legacy governors with help of min_sampling_rate.

At worst, we may end up setting the sampling rate to a value lower than
the rate at which frequency can be changed and then one of the CPUs in
the policy will be only changing frequency for ever.

But that is something for the user to decide and there is no need to
have special handling for such cases in the core. Leave it for the user
to figure out.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On tango platforms, firmware configures the CPU clock, and Linux is
then only allowed to use the cpu_clk_divider to change the frequency.
Build the OPP table dynamically at init, in order to support whatever
firmware throws at us.
Signed-off-by: NMarc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with
single cluster and this hardware is also compatible with the existing
driver through enabling CPU frequency feature with operating-points-v2
bindings. Also, this driver actually supports all MediaTek SoCs, the
Kconfig menu entry and file name itself should be updated with more
generic name to drop "MT8173"
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add zynqmp to the cpufreq dt platform device.
Signed-off-by: NShubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove unnecessary static on local variable hostbridge.
Such variable is initialized before being used,
on every execution path throughout the function.
The static has no benefit and, removing it reduces
the code size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see the difference in the code size. Also,
there is a significant difference in the bss segment. This log is the
output of the size command, before and after the code change:

before:
   text    data     bss     dec     hex filename
   5084    3392     256    8732    221c drivers/cpufreq/speedstep-ich.o

after:
   text    data     bss     dec     hex filename
   5062    3304     192    8558    216e drivers/cpufreq/speedstep-ich.o
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Avoid the READ_ONCE in commit 4a072c71 ("random: silence compiler
warnings and fix race") if we can leave the function after
arch_get_random_XXX().

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Unfortunately, on some models of some architectures getting a fully
seeded CRNG is extremely difficult, and so this can result in dmesg
getting spammed for a surprisingly long time.  This is really bad from
a security perspective, and so architecture maintainers really need to
do what they can to get the CRNG seeded sooner after the system is
booted.  However, users can't do anything actionble to address this,
and spamming the kernel messages log will only just annoy people.

For developers who want to work on improving this situation,
CONFIG_WARN_UNSEEDED_RANDOM has been renamed to
CONFIG_WARN_ALL_UNSEEDED_RANDOM.  By default the kernel will always
print the first use of unseeded randomness.  This way, hopefully the
security obsessed will be happy that there is _some_ indication when
the kernel boots there may be a potential issue with that architecture
or subarchitecture.  To see all uses of unseeded randomness,
developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

DRM_IOCTL_VERSION is supposed to update the name_len/date_len/desc_len
fields to user.

Fixes: 012c6741 ("switch compat_drm_version() to drm_ioctl_kernel()")
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The existing code gives an incorrect pointer value.
The buffer pointer 'buf' was of type unsigned short *, and 'count' was a
number in bytes. A cast of buf should have been used.

However, instead of casting, just change the code to use u32 pointers.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 8185e51f: ("mmc: tmio-mmc: add support for 32bit data port")
Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The commit 304419d8 ("mmc: core: Allocate per-request data using the
block layer core"), refactored the mechanism of queue handling, but also
made mmc_init_request() to be called after mmc_cleanup_queue(). This
triggers a null pointer dereference:

[  683.123791] BUG: unable to handle kernel NULL pointer dereference at (null)
[  683.123801] IP: mmc_init_request+0x2c/0xf0 [mmc_block]
...
[  683.123905] Call Trace:
[  683.123913]  alloc_request_size+0x4f/0x70
[  683.123919]  mempool_alloc+0x5f/0x150
[  683.123925]  ? __enqueue_entity+0x6c/0x70
[  683.123928]  get_request+0x3ad/0x720
[  683.123933]  ? prepare_to_wait_event+0x110/0x110
[  683.123937]  blk_queue_bio+0xc1/0x3a0
[  683.123940]  generic_make_request+0xf8/0x2a0
[  683.123942]  submit_bio+0x75/0x150
[  683.123947]  submit_bio_wait+0x51/0x70
[  683.123951]  blkdev_issue_flush+0x5c/0x90
[  683.123956]  ext4_sync_fs+0x171/0x1b0
[  683.123961]  sync_filesystem+0x73/0x90
[  683.123965]  fsync_bdev+0x24/0x50
[  683.123971]  invalidate_partition+0x24/0x50
[  683.123973]  del_gendisk+0xb2/0x2a0
[  683.123977]  mmc_blk_remove_req.part.38+0x71/0xa0 [mmc_block]
[  683.123980]  mmc_blk_remove+0xba/0x190 [mmc_block]
[  683.123990]  mmc_bus_remove+0x1a/0x20 [mmc_core]
[  683.123995]  device_release_driver_internal+0x141/0x200
[  683.123999]  device_release_driver+0x12/0x20
[  683.124001]  bus_remove_device+0xfd/0x170
[  683.124004]  device_del+0x1e8/0x330
[  683.124012]  mmc_remove_card+0x60/0xc0 [mmc_core]
[  683.124019]  mmc_remove+0x19/0x30 [mmc_core]
[  683.124025]  mmc_stop_host+0xfb/0x1a0 [mmc_core]
[  683.124032]  mmc_remove_host+0x1a/0x40 [mmc_core]
[  683.124037]  sdhci_remove_host+0x2e/0x1c0 [mmc_sdhci]
[  683.124042]  sdhci_pci_remove_slot+0x3f/0x80 [sdhci_pci]
[  683.124045]  sdhci_pci_remove+0x39/0x70 [sdhci_pci]
[  683.124049]  pci_device_remove+0x39/0xc0
[  683.124052]  device_release_driver_internal+0x141/0x200
[  683.124056]  driver_detach+0x3f/0x80
[  683.124059]  bus_remove_driver+0x55/0xd0
[  683.124062]  driver_unregister+0x2c/0x50
[  683.124065]  pci_unregister_driver+0x29/0x90
[  683.124069]  sdhci_driver_exit+0x10/0x4f3 [sdhci_pci]
[  683.124073]  SyS_delete_module+0x171/0x250
[  683.124078]  entry_SYSCALL_64_fastpath+0x1e/0xa9

Fix this by setting the queue DYING flag before cleanup the queue, as it
prevents new reqs from entering the queue.
Signed-off-by: NGrzegorz Sluja <grzegorzx.sluja@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Fixes: 304419d8 ("mmc: core: Allocate per-request data using the...")
[Ulf: Updated the changelog]
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Commit 76cde7e4 (PCI / PM: Make PCIe PME interrupts wake up from
suspend-to-idle) went too far with preventing pcie_pme_work_fn() from
clearing the root port's PME Status and re-enabling the PME interrupt
which should be done for PMEs to work correctly after system resume.

The failing scenario is as follows:

 1. pcie_pme_suspend() finds that the PME IRQ should be designated
    for system wakeup, so it calls enable_irq_wake() and then sets
    data->suspend_level to PME_SUSPEND_WAKEUP.

 2. PME interrupt happens at this point.

 3. pcie_pme_irq() runs, disables the PME interrupt and queues up
    the execution of pcie_pme_work_fn().

 4. pcie_pme_work_fn() runs before pcie_pme_resume() and breaks out
    of the loop right away, because data->suspend_level is not
    PME_SUSPEND_NONE, and it doesn't re-enable the PME interrupt
    for the same reason.

 5. pcie_pme_resume() runs and simply calls disable_irq_wake()
    without re-enabling the PME interrupt (because data->suspend_level
    is not PME_SUSPEND_NONE), so the PME interrupt remains disabled
    and the PME Status remains set.

To fix this notice that there is no reason why pcie_pme_work_fn()
should behave in a special way during system resume if the PME
interrupt is not disabled by pcie_pme_suspend() and partially revert
commit 76cde7e4 and restore the previous (and correct) behavior
of pcie_pme_work_fn().

Fixes: 76cde7e4 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle)
Reported-and-tested-by: NNaresh Solanki <naresh.solanki@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>

Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/bc5927726abc70d7c066df7ab4cb7cfce4a7b577.1499284835.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the code like the rest of the kernel.

But there is an oddity here because the inline should probably be removed.

It's an extern function in intelfb.h and it is used in intelfbdrv.c and
intelfbhw.c.

The inline is kept here as I suppose it's possible for some compiler to
make the uses inline in intelfbdrv and and also create an external
function for intelfbhw.

Link: http://lkml.kernel.org/r/8ba151a1fdc84e42cbf4aafc798513c0158edee1.1499284835.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Maik Broemme <mbroemme@libmpq.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the code like the rest of the kernel.
Also use inline instead of __inline__.

Link: http://lkml.kernel.org/r/a5072b74b6c293e6ec93c4900482e9d3267f15b2.1499284835.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/55d3e89d50bb03d603bfb28019fab07f48bdc714.1499284835.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/3f980cd89084ae09716353aba3171e4b3815e690.1499284835.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than
incur the oom for gfx allocations") has tried to remove disruptive OOM
killer because the userspace should be able to cope with allocation
failures.

At the time only __GFP_NORETRY could achieve that and it turned out that
this would fail the allocations just too easily.  So "drm/i915: Remove
__GFP_NORETRY from our buffer allocator" removed it and hoped for a
better solution.  __GFP_RETRY_MAYFAIL is that solution.  It will keep
retrying the allocation until there is no more progress and we would go
OOM.  Instead we fail the allocation and let the caller to deal with it.

Link: http://lkml.kernel.org/r/20170623085345.11304-6-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator.  This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER.  It has been always
ignored for smaller sizes.  This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic.  Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success.  This will work independent of the order and overrides the
default allocator behavior.  Page allocator users have several levels of
guarantee vs.  cost options (take GFP_KERNEL as an example)

 - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
   attempt to free memory at all. The most light weight mode which even
   doesn't kick the background reclaim. Should be used carefully because
   it might deplete the memory and the next user might hit the more
   aggressive reclaim

 - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
   allocation without any attempt to free memory from the current
   context but can wake kswapd to reclaim memory if the zone is below
   the low watermark. Can be used from either atomic contexts or when
   the request is a performance optimization and there is another
   fallback for a slow path.

 - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
   non sleeping allocation with an expensive fallback so it can access
   some portion of memory reserves. Usually used from interrupt/bh
   context with an expensive slow path fallback.

 - GFP_KERNEL - both background and direct reclaim are allowed and the
   _default_ page allocator behavior is used. That means that !costly
   allocation requests are basically nofail but there is no guarantee of
   that behavior so failures have to be checked properly by callers
   (e.g. OOM killer victim is allowed to fail currently).

 - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
   and all allocation requests fail early rather than cause disruptive
   reclaim (one round of reclaim in this implementation). The OOM killer
   is not invoked.

 - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
   behavior and all allocation requests try really hard. The request
   will fail if the reclaim cannot make any progress. The OOM killer
   won't be triggered.

 - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
   and all allocation requests will loop endlessly until they succeed.
   This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic.  No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
  Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
  Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a over-read condition detected by FORTIFY_SOURCE for this
line:

	memcpy(SKB_TO_PKT(skb), &ack_pkt, sizeof(skb->cb));

The error was:

  In file included from ./include/linux/bitmap.h:8:0,
                   from ./include/linux/cpumask.h:11,
                   from ./include/linux/mm_types_task.h:13,
                   from ./include/linux/mm_types.h:4,
                   from ./include/linux/kmemcheck.h:4,
                   from ./include/linux/skbuff.h:18,
                   from drivers/infiniband/sw/rxe/rxe_resp.c:34:
  In function 'memcpy',
      inlined from 'send_atomic_ack.constprop' at drivers/infiniband/sw/rxe/rxe_resp.c:998:2,
      inlined from 'acknowledge' at drivers/infiniband/sw/rxe/rxe_resp.c:1026:3,
      inlined from 'rxe_responder' at drivers/infiniband/sw/rxe/rxe_resp.c:1286:10:
  ./include/linux/string.h:309:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
      __read_overflow2();

Daniel Micay noted that struct rxe_pkt_info is 32 bytes on 32-bit
architectures, but skb->cb is still 64.  The memcpy() over-reads 32
bytes.  This fixes it by zeroing the unused bytes in skb->cb.

Link: http://lkml.kernel.org/r/1497903987-21002-5-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This avoids CONFIG_FORTIFY_SOURCE from being enabled during the EFI stub
build, as adding a panic() implementation may not work well.  This can
be adjusted in the future.

Link: http://lkml.kernel.org/r/1497903987-21002-2-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Suggested-by: NDaniel Micay <danielmicay@gmail.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The add_device_randomness() function would ignore incoming bytes if the
crng wasn't ready.  This additionally makes sure to make an early enough
call to add_latent_entropy() to influence the initial stack canary,
which is especially important on non-x86 systems where it stays the same
through the life of the boot.

Link: http://lkml.kernel.org/r/20170626233038.GA48751@beastSigned-off-by: NKees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since internal phy-mode is reserved for non-xMII protocol we cannot use
it with dwmac-sun8i.
Furthermore, all DT patchs which comes with this patch were cleaned, so
the current state is broken.
This reverts commit 1c2fa5f8 ("net: stmmac: support future possible different internal phy mode")

Fixes: 1c2fa5f8 ("net: stmmac: support future possible different internal phy mode")
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we have more than 32 unicast MAC addresses assigned to an interface
we will read beyond the end of the address table in the driver when
adding filters. The next 256 entries store multicast addresses, so we
will end up attempting to insert duplicate filters, which is mostly
harmless. If we add more than 288 unicast addresses we will then read
past the multicast address table, which is likely to be more exciting.

Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode")
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>