Instead of having a separate callback, use the HW config callback
with a new flag to change retry limits.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This makes mac80211 notify the driver which configuration
actually changed, e.g. channel etc.

No driver changes, this is just plumbing, driver authors are
expected to act on this if they want to.

Also remove the HW CONFIG debug printk, it's incorrect, often
we configure something else.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Never actually used.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch cleans up a number of things:
 * the unusable definition of the HT capabilities/HT information
   information elements
 * variable names that are hard to understand
 * mac80211: move ieee80211_handle_ht to ht.c and remove the unused
             enable_ht parameter
 * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht
 * mac80211: fix bug with casting the result of ieee80211_bss_get_ie
             to an information element _contents_ rather than the
             whole element, add size checking (another out-of-bounds
             access bug fixed!)
 * mac80211: remove some unused return values in favour of BUG_ON
             checking
 * a few minor other things
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch makes mac80211 handle short slot requests from the AP
properly. Also warn about uses of IEEE80211_CONF_SHORT_SLOT_TIME
and optimise out the code since it cannot ever be hit anyway.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The antenna gain isn't exactly configurable, despite the belief of
some unnamed individual who thinks that the EEPROM might influence
it.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This isn't used by anyone, if we ever need it we can add
it back, until then it's useless.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds qdisc_peek_dequeued() wrapper to emulate peek method
with qdisc->dequeue() and storing "peeked" skb in qdisc->gso_skb until
dequeuing. This is mainly for compatibility reasons not to break some
strange configs because peeking is expected for non-work-conserving
parent qdiscs to query work-conserving child qdiscs.

This implementation requires using qdisc_dequeue_peeked() wrapper
instead of directly calling qdisc->dequeue() for all qdiscs ever
querried with qdisc->ops->peek() or qdisc_peek_dequeued().
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Patrick McHardy <kaber@trash.net>

Just as a demonstration how easy adding a peek operation to the
work-conserving qdiscs actually is. It doesn't need to keep or change
any internal state in many cases thanks to the guarantee that the
packet will either be dequeued or, if another packet arrives, the
upper qdisc will immediately ->peek again to reevaluate the state.

(This is only slightly modified Patrick's patch.)
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add Qdisc_ops peek() method in order to replace requeuing.

Based on ideas and patches of Herbert Xu, Patrick McHardy and
David S. Miller.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netns ops which are registered with register_pernet_gen_device() are
shutdown strictly before those which are registered with
register_pernet_subsys(). Sometimes this leads to opposite (read: buggy)
shutdown ordering between two modules.

Add register_pernet_gen_subsys()/unregister_pernet_gen_subsys() for modules
which aren't elite enough for entry in struct net, and which can't use
register_pernet_gen_device(). PPTP conntracking module is such one.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove excess kernel-doc function parameters from networking header
& driver files:

Warning(include/net/sock.h:946): Excess function parameter or struct member 'sk' description in 'sk_filter_release'
Warning(include/linux/netdevice.h:1545): Excess function parameter or struct member 'cpu' description in 'netif_tx_lock'
Warning(drivers/net/wan/z85230.c:712): Excess function parameter or struct member 'regs' description in 'z8530_interrupt'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Corey Minyard found a race added in commit 271b72c7
(udp: RCU handling for Unicast packets.)

 "If the socket is moved from one list to another list in-between the
 time the hash is calculated and the next field is accessed, and the
 socket has moved to the end of the new list, the traversal will not
 complete properly on the list it should have, since the socket will
 be on the end of the new list and there's not a way to tell it's on a
 new list and restart the list traversal.  I think that this can be
 solved by pre-fetching the "next" field (with proper barriers) before
 checking the hash."

This patch corrects this problem, introducing a new
sk_for_each_rcu_safenext() macro.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Goals are :

1) Optimizing handling of incoming Unicast UDP frames, so that no memory
 writes should happen in the fast path.

 Note: Multicasts and broadcasts still will need to take a lock,
 because doing a full lockless lookup in this case is difficult.

2) No expensive operations in the socket bind/unhash phases :
  - No expensive synchronize_rcu() calls.

  - No added rcu_head in socket structure, increasing memory needs,
  but more important, forcing us to use call_rcu() calls,
  that have the bad property of making sockets structure cold.
  (rcu grace period between socket freeing and its potential reuse
   make this socket being cold in CPU cache).
  David did a previous patch using call_rcu() and noticed a 20%
  impact on TCP connection rates.
  Quoting Cristopher Lameter :
   "Right. That results in cacheline cooldown. You'd want to recycle
    the object as they are cache hot on a per cpu basis. That is screwed
    up by the delayed regular rcu processing. We have seen multiple
    regressions due to cacheline cooldown.
    The only choice in cacheline hot sensitive areas is to deal with the
    complexity that comes with SLAB_DESTROY_BY_RCU or give up on RCU."

  - Because udp sockets are allocated from dedicated kmem_cache,
  use of SLAB_DESTROY_BY_RCU can help here.

Theory of operation :
---------------------

As the lookup is lockfree (using rcu_read_lock()/rcu_read_unlock()),
special attention must be taken by readers and writers.

Use of SLAB_DESTROY_BY_RCU is tricky too, because a socket can be freed,
reused, inserted in a different chain or in worst case in the same chain
while readers could do lookups in the same time.

In order to avoid loops, a reader must check each socket found in a chain
really belongs to the chain the reader was traversing. If it finds a
mismatch, lookup must start again at the begining. This *restart* loop
is the reason we had to use rdlock for the multicast case, because
we dont want to send same message several times to the same socket.

We use RCU only for fast path.
Thus, /proc/net/udp still takes spinlocks.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UDP sockets are hashed in a 128 slots hash table.

This hash table is protected by *one* rwlock.

This rwlock is readlocked each time an incoming UDP message is handled.

This rwlock is writelocked each time a socket must be inserted in
hash table (bind time), or deleted from this table (close time)

This is not scalable on SMP machines :

1) Even in read mode, lock() and unlock() are atomic operations and
 must dirty a contended cache line, shared by all cpus.

2) A writer might be starved if many readers are 'in flight'. This can
 happen on a machine with some NIC receiving many UDP messages. User
 process can be delayed a long time at socket creation/dismantle time.

This patch prepares RCU migration, by introducing 'struct udp_table
and struct udp_hslot', and using one spinlock per chain, to reduce
contention on central rwlock.

Introducing one spinlock per chain reduces latencies, for port
randomization on heavily loaded UDP servers. This also speedup
bindings to specific ports.

udp_lib_unhash() was uninlined, becoming to big.

Some cleanups were done to ease review of following patch
(RCUification of UDP Unicast lookups)
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ifdef out
* struct sk_buff::sp		(pointer)
* struct dst_entry::xfrm	(pointer)
* struct sock::sk_policy	(2 pointers)
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a patch to provide on demand route cache rebuilding.  Currently, our
route cache is rebulid periodically regardless of need.  This introduced
unneeded periodic latency.  This patch offers a better approach.  Using code
provided by Eric Dumazet, we compute the standard deviation of the average hash
bucket chain length while running rt_check_expire.  Should any given chain
length grow to larger that average plus 4 standard deviations, we trigger an
emergency hash table rebuild for that net namespace.  This allows for the common
case in which chains are well behaved and do not grow unevenly to not incur any
latency at all, while those systems (which may be being maliciously attacked),
only rebuild when the attack is detected.  This patch take 2 other factors into
account:
1) chains with multiple entries that differ by attributes that do not affect the
hash value are only counted once, so as not to unduly bias system to rebuilding
if features like QOS are heavily used
2) if rebuilding crosses a certain threshold (which is adjustable via the added
sysctl in this patch), route caching is disabled entirely for that net
namespace, since constant rebuilding is less efficient that no caching at all

Tested successfully by me.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix mac80211.h kernel-doc: it had some extra parameters that were
no longer valid and incorrect format for a return value in 2 places.

Warning(lin2628-rc2//include/net/mac80211.h:1487): Excess function parameter or struct member 'control' description in 'ieee80211_beacon_get'
Warning(lin2628-rc2//include/net/mac80211.h:1596): Excess function parameter or struct member 'control' description in 'ieee80211_get_buffered_bc'
Warning(lin2628-rc2//include/net/mac80211.h:1632): Excess function parameter or struct member 'rc4key' description in 'ieee80211_get_tkip_key'
Warning(lin2628-rc2//include/net/mac80211.h:1735): Excess function parameter or struct member 'return' description in 'ieee80211_start_tx_ba_session'
Warning(lin2628-rc2//include/net/mac80211.h:1775): Excess function parameter or struct member 'return' description in 'ieee80211_stop_tx_ba_session'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes an OOPS in hard_header if a Phonet address is assigned to a
non-Phonet network interface.
Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Once an endpoint has reached the SHUTDOWN-RECEIVED state,
it MUST NOT send a SHUTDOWN in response to a ULP request.
The Cumulative TSN Ack of the received SHUTDOWN chunk
MUST be processed.

This patch fix to process Cumulative TSN Ack of the received
SHUTDOWN chunk in SHUTDOWN_RECEIVED state.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several sparse warnings were introduced by patches accepted during the merge
window which weren't caught.  This patch fixes those warnings.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch implements the RDMA transport provider for 9P. It allows
mounts to be performed over iWARP and IB capable network interfaces.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NLatchesar Ionkov <lionkov@lanl.gov>

Fixes build problem with 9p when building with debug disabled.
Also contains some fixes for warnings which pop up when 
CONFIG_NET_9P_DEBUG is disabled.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The netfilter families have been decoupled from regular protocol families.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new debug support lacks some of the information that the previous fcprint
code provided -- this patch focuses on better presentation of debug data along
with more helpful debug along error paths.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Remove depricated conv functions which have been replaced with new 
protocol routines.

This patch also reworks the one instance of the file-system code which
directly calls conversion routines (to accomplish unpacking dirreads).
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This removes the vestigial tag field from the p9_req_t structure.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

One of the current debug options allows users to get a verbose dump of fcalls.
This isn't really necessary as correctly parsed protocol frames can be printed
as part of the code in the client functions.  The consolidated printfcalls
structure would require new entries to be added for every extension.  This
patch removes the debug print methods and their use.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This adds a new protocol processing support code based on Anthony Liguori's
9p library code.  This code performs protocol marshalling/unmarshalling using
printf like strings to represent protocol elements.  It is my intent to use
them to replace the current functions in conv.c as well as the 
p9_create_* functions.

This should make the client implementation much more clear, and also make it
much easier to add new protocol extensions by limiting the number of places
in which changes need to be made.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation 
which calls read operations and processes the results.

This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets.  This provides a 
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

There are a couple of methods in the client code which aren't actually
wire operations.  To keep things organized cleaner, these operations are
being moved to the fs layer.

This patch moves the readn meta-function (which executes multiple wire
reads until a buffer is full) to the fs layer.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Currently there are two separate versions of read and write.  One for
dealing with user buffers and the other for dealing with kernel buffers.
There is a tremendous amount of code duplication in the otherwise
identical versions of these functions.  This patch adds an additional
user buffer parameter to read and write and conditionalizes handling of
the buffer on whether the kernel buffer or the user buffer is populated.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This code moves the rpc function to the common client base,
reorganizes the flush code to be more simple and stable, and
makes the necessary adjustments to the underlying transports
to adapt to the new structure.

This reduces the overall amount of code duplication between the
transports and should make adding new transports more straightforward.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Apply the now common p9_req_t structure to the fd transport.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>