- 29 3月, 2007 30 次提交
-
-
由 Hugh Dickins 提交于
sys_madvise has down_write of mmap_sem, then madvise_remove calls vmtruncate_range which takes i_mutex and i_alloc_sem: no, we can easily devise deadlocks from that ordering. madvise_remove drop mmap_sem while calling vmtruncate_range: luckily, since madvise_remove doesn't split or merge vmas, it's easy to handle this case with a NULL prev, without restructuring sys_madvise. (Though sad to retake mmap_sem when it's unlikely to be needed, and certainly down_read is sufficient for MADV_REMOVE, unlike the other madvices.) Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
shmem_truncate_range has its own truncate_inode_pages_range, to free any pages racily instantiated while it was in progress: a SHMEM_PAGEIN flag is set when this might have happened. But holepunching gets no chance to clear that flag at the start of vmtruncate_range, so it's always set (unless a truncate came just before), so holepunch almost always does this second truncate_inode_pages_range. shmem holepunch has unlikely swap<->file races hereabouts whatever we do (without a fuller rework than is fit for this release): I was going to skip the second truncate in the punch_hole case, but Miklos points out that would make holepunch correctness more vulnerable to swapoff. So keep the second truncate, but follow it by an unmap_mapping_range to eliminate the disconnected pages (freed from pagecache while still mapped in userspace) that it might have left behind. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Miklos Szeredi observes that during truncation of shmem page directories, info->lock is released to improve latency (after lowering i_size and next_index to exclude races); but this is quite wrong for holepunching, which receives no such protection from i_size or next_index, and is left vulnerable to races with shmem_unuse, shmem_getpage and shmem_writepage. Hold info->lock throughout when holepunching? No, any user could prevent rescheduling for far too long. Instead take info->lock just when needed: in shmem_free_swp when removing the swap entries, and whenever removing a directory page from the level above. But so long as we remove before scanning, we can safely skip taking the lock at the lower levels, except at misaligned start and end of the hole. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Miklos Szeredi observes BUG_ON(!entry) in shmem_writepage() triggered in rare circumstances, because shmem_truncate_range() erroneously removes partially truncated directory pages at the end of the range: later reclaim on pages pointing to these removed directories triggers the BUG. Indeed, and it can also cause data loss beyond the hole. Fix this as in the patch proposed by Miklos, but distinguish between "limit" (how far we need to search: ignore truncation's next_index optimization in the holepunch case - if there are races it's more consistent to act on the whole range specified) and "upper_limit" (how far we can free directory pages: generally we must be careful to keep partially punched pages, but can relax at end of file - i_size being held stable by i_mutex). Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cs> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Mark some static arrays as const that aren't and shouldn't be modified, and remove incorrect static attribute from some variables. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
* rename name to host_root_path * rename data to req_root. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Fix a few miscellaneous compilation problems - an assignment with mismatched types in ldt.c a missing include in mconsole.h which needs a definition of uml_pt_regs I missed removing an include of user_util.h in hostfs Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Lunz 提交于
Permit lvm to create logical volumes without crashing UML. When device-mapper's DM_DEV_CREATE_CMD ioctl is called to create a new device, dev_create()->dm_create()->alloc_dev()-> blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY) is called. blk_queue_bounce_limit(BLK_BOUNCE_ANY) calls init_emergency_isa_pool() if blk_max_pfn < blk_max_low_pfn. This is the case on UML, but init_emergency_isa_pool() hits BUG_ON(!isa_page_pool) because there doesn't seem to be a dma zone on UML for mempool_create() to allocate from. Most architectures seem to have max_low_pfn == max_pfn, but UML doesn't because of the uml_reserved chunk it keeps for itself. From what I can see, max_pfn and max_low_pfn don't get much use after the bootmem-allocator stops being used anyway, except that they initialize the block layer's blk_max_low_pfn/blk_max_pfn. This ensures init_emergency_isa_pool() doesn't crash uml in this situation by setting max_low_pfn == max_pfn in mem_init(). Signed-off-by: NJason Lunz <lunz@falooley.org> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
As the comment immediately preceding this points out, this list is changed in irq context, so it needs to be protected with spin_lock_irqsave in process context when it is processed. Sometimes, gcc should just compile the comments and forget the code. The IRQ side of this was better, in the sense that it blocked and unblocked interrupts, but it still should have saved and restored them. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
_PAGE_PROTNONE conflicts with the lowest bit of pgoff. This causes all sorts of weirdness when nonlinear mappings are used. Took me a good half day to track this down. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Acked-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Fix a NULL dereference when unplugging a device. The default value of err_msg wants to be "" in case the driver doesn't modify it. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Commit 62f96cb0 introduced per-devices queues and locks, which was fine as far as it went, but left in place a global which controlled access to submitting requests to the host. This should have been made per-device as well, since it causes I/O hangs when multiple block devices are in use. This patch fixes that by replacing the global with an activity flag in the device structure in order to tell whether the queue is currently being run. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
I have a bugreport that scrollwheel of bluetooth version of apple mightymouse doesn't work. The USB version of mightymouse works, as there is a quirk for handling scrollwheel in hid/usbhid for it. Now that bluetooth git tree is hooked to generic hid layer, it could easily use the quirks which are already present in generic hid parser, hid-input, etc. Below is a simple patch against bluetooth git tree, which adds quirk handling to current bluetooth hidp code, and sets quirk flags for device 0x05ac/0x030c, which is the bluetooth version of the apple mightymouse. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Salyzyn, Mark 提交于
The IPS and DPT_I2O drivers are missing, so here is my 'hand coded' addition to deal with overlap to the patch below (apply both). I selected Maintained rather than supported for the ips and dpt_i2o driver due to their legacy nature. Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
In commit 0475ac08 when converting the orphaned process group handling to use struct pid I made a small mistake. I accidentally replaced an == with a !=. Besides just being a dumb thing to do apparently this has a bad side effect. The improper orphaned process group detection causes kwin to die after a suspend/resume cycle. I'm amazed this patch has been around as long as it has without anyone else noticing something funny going on. And the following people deserve credit for spotting and helping to reproduce this. Thanks to: Sid Boyce <g3vbv@blueyonder.co.uk> Thanks to: "Michael Wu" Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yinghai.lu@amd.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean-Christophe Dubois 提交于
Fix a bug in dcr_unmap(). At unmap time the DCR offset need to be added instead of substracted. Signed-off-by: NJean-Christophe Dubois <jdubois@mc.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2_dlm: Check for migrateable lockres in dlm_empty_lockres() ocfs2_dlm: Fix lockres ref counting bug
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [VIDEO]: Fix section mismatch in cg3.c [SPARC]: sparc64 gcc-4.2.0 20070317 -Werror failure [VIDEO] ffb: Fix two DAC handling bugs. [SPARC32]: Fix SMP build regression [DRM]: Delete sparc64 FFB driver code that never gets built.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [DCCP] getsockopt: Fix DCCP_SOCKOPT_[SEND,RECV]_CSCOV
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Handle aborting a command after it is sent IB/mthca: Fix thinko in init_mr_table() RDMA/cxgb3: Fix resource leak in cxio_hal_init_ctrl_qp()
-
由 Eric W. Biederman 提交于
So I think the right solution is to simply make pci_enable_device just flip enable bits and move the rest of the work someplace else. However a thorough cleanup is a little extreme for this point in the release cycle, so I think a quick hack that makes the code not stomp the irq when msi irq's are enabled should be the first fix. Then we can later make the code not change the irqs at all. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
nmi_cpu_setup() is called from hardirq context and acquires oprofilefs_lock. alloc_event_buffer() and oprofilefs_ulong_from_user() acquire this lock without disabling irqs, which could deadlock. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Trivial fix for hp6xx build. sh: Fixup __cmpxchg() compile breakage with gcc4. sh: Kill bogus GCC4 symbol exports.
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: NCQ is broken on Maxtor 6L250S0 pata_pdc202xx_old: LBA48 bug libata: IDENTIFY backwards for drive side cable detection ahci.c: walkaround for SB600 SATA internal error issue [libata] Disable ACPI by default; fix namespace problems
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: SUN3/3X Lance trivial fix improved mv643xx_eth: Fix use of uninitialized port_num field forcedeth: fix tx timeout forcedeth: fix nic poll qla3xxx: bugfix: Jumbo frame handling. qla3xxx: bugfix: Dropping interrupt under heavy network load. qla3xxx: bugfix: Multi segment sends were getting whacked. qla3xxx: bugfix: Add tx control block memset. atl1: remove unnecessary crc inversion myri10ge: correctly detect when TSO should be used [PATCH] WE-22 : prevent information leak on 64 bit [PATCH] wext: Add missing ioctls to 64<->32 conversion [PATCH] bcm43xx: Fix machine check on PPC for version 1 PHY [PATCH] bcm43xx: fix radio_set_tx_iq [PATCH] bcm43xx: Fix code for confusion between PHY revision and PHY version
-
由 Ingo Molnar 提交于
hrtimer_start() incorrectly set the 'reprogram' flag to enqueue_hrtimer(), which should only be 1 if the hrtimer is queued to the current CPU. Doing otherwise could result in a reprogramming of the current CPU's clockevents device, with a timer that is not queued to it - resulting in a bogus next expiry value. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert Reif 提交于
Fix section mismatch warning by moving data into __devinitdata section. Add __devinit to initialization functions. Signed-off-by: NRobert Reif <reif@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
We were only checking if there was enough space to put the int, but left len as specified by the (malicious) user, sigh, fix it by setting len to sizeof(val) and transfering just one int worth of data, the one asked for. Also check for negative len values. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 3月, 2007 10 次提交
-
-
由 Kristoffer Ericson 提交于
The IRQ3 define was removed when asm-sh/irq.h was cleaned up, this updates the hp6xx header to use the IRQ number directly. Signed-off-by: NKristoffer Ericson <kristoffer_e1@hotmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
As reported by Manuel: When I build linux with GCC-4.x and enable CONFIG_CC_OPTIMIZE_FOR_SIZE linking fails with this error: LD .tmp_vmlinux1 kernel/built-in.o: In function '__cmpxchg_called_with_bad_pointer' make[1]: *** [.tmp_vmlinux1] Error 1 make: *** [_all] Error 2 This ended up being an inlining problem, fixed by explicitly including linux/compiler.h and grabbing the definitions from there. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
__sdivsi3_i4i, __udiv_qrnnd_16, and __udivsi3_i4i don't exist outside of the ST compiler, so kill them off. This causes compile failures with other GCC4 compilers. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Cyrill V. Gorcunov 提交于
This patch adds checking for allocated DVMA memory and granted IRQ line. Signed-off-by: NCyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gabriel Paubert 提交于
In this driver, the default ethernet address is first set by by calling eth_port_uc_addr_get() which reads the relevant registers of the corresponding port as initially set by firmware. However that function used the port_num field accessed through the private area of net_dev before it was set. The result was that one board I have ended up with the unicast address set to 00:00:00:00:00:00 (only port 1 is connected on this board). The problem appeared after commit 84dd619e. This patch fixes the bug by setting mp->port_num prior to calling eth_port_uc_get_addr(). Signed-off-by: NGabriel Paubert <paubert@iram.es> Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ayaz Abdulla 提交于
The tx timeout routine was waking the tx queue conditionally. However, it must call it unconditionally since the dev_watchdog has halted the tx queue before calling the timeout function. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ayaz Abdulla 提交于
The nic poll routine was missing the call to the optimized irq routine. This patch adds the missing call for the optimized path. See http://bugzilla.kernel.org/show_bug.cgi?id=7950 for more information. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ron Mercer 提交于
Fixed rx checksum bits. Turn on TCP processing for rx checksum. Fixed max frame length register write. It wasn't getting set in multi-port system. Set rx buffer queue length properly for jumbo frames. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ron Mercer 提交于
Update the rx queue pointer when exiting NAPI poll rather than at the end of each iteration. Remove unnecessary PCI flushes that occurred after every write. Now write all regs and flush once. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-