Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 16 11月, 2019 1 次提交
  3. 14 11月, 2019 1 次提交
    • I
      drm/i915/gen8+: Add RC6 CTX corruption WA · 2248a283
      由 Imre Deak 提交于 
      In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.

v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
  sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
  change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: NDave Airlie <airlied@redhat.com>
      2248a283
  5. 12 11月, 2019 3 次提交
  7. 06 11月, 2019 5 次提交
    • I
      drm/i915/gen8+: Add RC6 CTX corruption WA · 7e34f4e4
      由 Imre Deak 提交于 
      In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.

v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
  sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
  change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
      7e34f4e4
    • J
      drm/i915/cmdparser: Add support for backward jumps · f8c08d8f
      由 Jon Bloomfield 提交于 
      To keep things manageable, the pre-gen9 cmdparser does not
attempt to track any form of nested BB_START's. This did not
prevent usermode from using nested starts, or even chained
batches because the cmdparser is not strictly enforced pre gen9.

Instead, the existence of a nested BB_START would cause the batch
to be emitted in insecure mode, and any privileged capabilities
would not be available.

For Gen9, the cmdparser becomes mandatory (for BCS at least), and
so not providing any form of nested BB_START support becomes
overly restrictive. Any such batch will simply not run.

We make heavy use of backward jumps in igt, and it is much easier
to add support for this restricted subset of nested jumps, than to
rewrite the whole of our test suite to avoid them.

Add the required logic to support limited backward jumps, to
instructions that have already been validated by the parser.

Note that it's not sufficient to simply approve any BB_START
that jumps backwards in the buffer because this would allow an
attacker to embed a rogue instruction sequence within the
operand words of a harmless instruction (say LRI) and jump to
that.

We introduce a bit array to track every instr offset successfully
validated, and test the target of BB_START against this. If the
target offset hits, it is re-written to the same offset in the
shadow buffer and the BB_START cmd is allowed.

Note: This patch deliberately ignores checkpatch issues in the
cmdtables, in order to match the style of the surrounding code.
We'll correct the entire file in one go in a later patch.

v2: set dispatch secure late (Mika)
v3: rebase (Mika)
v4: Clear whitelist on each parse
    Minor review updates (Chris)
v5: Correct backward jump batching
v6: fix compilation error due to struct eb shuffle (Mika)

Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>
      f8c08d8f
    • J
      drm/i915: Support ro ppgtt mapped cmdparser shadow buffers · 4f7af194
      由 Jon Bloomfield 提交于 
      For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.

For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.

Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.

Add the required paths to map the shadow buffer to ppgtt ro for Gen8+

v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>
      4f7af194
    • J
      drm/i915: Remove Master tables from cmdparser · 66d8aba1
      由 Jon Bloomfield 提交于 
      The previous patch has killed support for secure batches
on gen6+, and hence the cmdparsers master tables are
now dead code. Remove them.
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>
      66d8aba1
    • J
      drm/i915: Disable Secure Batches for gen6+ · 44157641
      由 Jon Bloomfield 提交于 
      Retroactively stop reporting support for secure batches
through the api for gen6+ so that older binaries trigger
the fallback path instead.

Older binaries use secure batches pre gen6 to access resources
that are not available to normal usermode processes. However,
all known userspace explicitly checks for HAS_SECURE_BATCHES
before relying on the secure batch feature.

Since there are no known binaries relying on this for newer gens
we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES.

v2: rebase (Mika)
v3: rebase (Mika)
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>
      44157641
  9. 05 11月, 2019 1 次提交
  11. 01 11月, 2019 4 次提交
  13. 30 10月, 2019 1 次提交
  15. 27 10月, 2019 2 次提交
  17. 26 10月, 2019 3 次提交
  19. 25 10月, 2019 1 次提交
    • V
      drm/i915: Rework global state locking · 1d5a95b5
      由 Ville Syrjälä 提交于 
      So far we've sort of protected the global state under dev_priv with
the connection_mutex. I wan to change that so that we can change the
cdclk even for pure plane updates. To that end let's formalize the
protection of the global state to follow what I started with the cdclk
code already (though not entirely properly) such that any crtc mutex
will suffice as a read lock, and all crtcs mutexes act as the write
lock.

We'll also pimp intel_atomic_state_clear() to clear the entire global
state, so that we don't accidentally leak stale information between
the locking retries.

As a slight optimization we'll only lock the crtc mutexes to protect
the global state, however if and when we actually have to poke the
hw (eg. if the actual cdclk changes) we must serialize commits
across all crtcs so that a parallel nonblocking commit can't get
ahead of the cdclk reprogamming. We do that by adding all crtcs to
the state.

TODO: the old global state examined during commit may still
be a problem since it always looks at the _latest_ swapped state
in dev_priv. Need to add proper old/new state for that too I think.

v2: Remeber to serialize the commits if necessary
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-3-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
      1d5a95b5
  21. 24 10月, 2019 1 次提交
  23. 21 10月, 2019 2 次提交
  25. 18 10月, 2019 3 次提交
  27. 17 10月, 2019 1 次提交
  29. 16 10月, 2019 1 次提交
  31. 11 10月, 2019 1 次提交
  33. 09 10月, 2019 1 次提交
  35. 08 10月, 2019 3 次提交
    • A
      drm/i915/tgl: Switch between dc3co and dc5 based on display idleness · 1c4d821d
      由 Anshuman Gupta 提交于 
      DC3CO is useful power state, when DMC detects PSR2 idle frame
while an active video playback, playing 30fps video on 60hz panel
is the classic example of this use case.

B.Specs:49196 has a restriction to enable DC3CO only for Video Playback.
It will be worthy to enable DC3CO after completion of each pageflip
and switch back to DC5 when display is idle because driver doesn't
differentiate between video playback and a normal pageflip.
We will use Frontbuffer flush call tgl_dc3co_flush() to enable DC3CO
state only for ORIGIN_FLIP flush call, because DC3CO state has primarily
targeted for VPB use case. We are not interested here for frontbuffer
invalidates calls because that triggers PSR2 exit, which will
explicitly disable DC3CO.

DC5 and DC6 saves more power, but can't be entered during video
playback because there are not enough idle frames in a row to meet
most PSR2 panel deep sleep entry requirement typically 4 frames.
As PSR2 existing implementation is using minimum 6 idle frames for
deep sleep, it is safer to enable DC5/6 after 6 idle frames
(By scheduling a delayed work of 6 idle frames, once DC3CO has been
enabled after a pageflip).

After manually waiting for 6 idle frames DC5/6 will be enabled and
PSR2 deep sleep idle frames will be restored to 6 idle frames, at this
point DMC will triggers DC5/6 once PSR2 enters to deep sleep after
6 idle frames.
In future when we will enable S/W PSR2 tracking, we can change the
PSR2 required deep sleep idle frames to 1 so DMC can trigger the
DC5/6 immediately after S/W manual waiting of 6 idle frames get
complete.

v2: calculated s/w state to switch over dc3co when there is an
    update. [Imre]
    Used cancel_delayed_work_sync() in order to avoid any race
    with already scheduled delayed work. [Imre]
v3: Cancel_delayed_work_sync() may blocked the commit work.
    hence dropping it, dc5_idle_thread() checks the valid wakeref before
    putting the reference count, which avoids any chances of dropping
    a zero wakeref. [Imre (IRC)]
v4: Used frontbuffer flush mechanism. [Imre]
v5: Used psr.pipe to extract frontbuffer busy bits. [Imre]
    Used cancel_delayed_work_sync() in encoder disable path. [Imre]
    Used mod_delayed_work() instead of cancelling and scheduling a
    delayed work. [Imre]
    Used psr.lock in tgl_dc5_idle_thread() to enable psr2 deep
    sleep. [Imre]
    Removed DC5_REQ_IDLE_FRAMES macro. [Imre]
v6: Used dc3co_exitline check instead of TGL and dc3co allowed_dc_mask
    checks, used delayed_work_pending with the psr lock and removed the
    psr2_deep_slp_disabled flag. [Imre]
v7: Code refactoring, moved most of functional code to inte_psr.c [Imre]
    Using frontbuffer_bits on psr.pipe check instead of
    busy_frontbuffer_bits. [Imre]
    Calculating dc3co_exit_delay in intel_psr_enable_locked. [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-6-anshuman.gupta@intel.com
      1c4d821d
    • A
      drm/i915/tgl: Enable DC3CO state in "DC Off" power well · 4645e906
      由 Anshuman Gupta 提交于 
      Add target_dc_state and used by set_target_dc_state API
in order to enable DC3CO state with existing DC states.
target_dc_state will enable/disable the desired DC state in
DC_STATE_EN reg when "DC Off" power well gets disable/enable.

v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
    Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
    Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
    to a appropriate place haswell_crtc_enable(). [Imre]
    Changed the DC3CO power well enabled call back logic as
    recommended in review comments. [Imre]
v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
v5: using udelay() instead of waiting for DC3CO exit status.
v6: Fixed minor unwanted change.
v7: Removed DC3CO powerwell and POWER_DOMAIN_VIDEO.
v8: Uniform checks by using only target_dc_state instead of allowed_dc_mask
    in "DC off" power well callback. [Imre]
    Adding "DC off" power well id to older platforms. [Imre]
    Removed psr2_deep_sleep flag from tgl_set_target_dc_state. [Imre]
v9: Used switch case for target DC state in
    gen9_dc_off_power_well_disable(), checking DC3CO state against
    allowed DC mask, using WARN_ON() in
    tgl_set_target_dc_state(). [Imre]
v10: Code refactoring and using sanitize_target_dc_state(). [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-4-anshuman.gupta@intel.com
      4645e906
    • C
      drm/i915/perf: Wean ourselves off dev_priv · 8f8b1171
      由 Chris Wilson 提交于 
      Use the local uncore accessors for the GT rather than using the [not-so]
magic global dev_priv mmio routines. In the process, we also teach the
perf stream to use backpointers to the i915_perf rather than digging it
out of dev_priv.

v2: Rebase onto i915_perf_types.h
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-1-chris@chris-wilson.co.uk
      8f8b1171
  37. 07 10月, 2019 2 次提交
  39. 06 10月, 2019 1 次提交
  41. 04 10月, 2019 2 次提交