Includes fix for Xilinx silicon errata 213
Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.

Board specific configuration moved out of virtex.[ch] and into the
xparameters.h wrapper.

This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*.  The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices.  Only the bootloader (or
ppcboot) will need xparameters directly.
Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX
FPGAs.  This patch cleans up the Virtex naming convention to reflect more
than just the Virtex-II Pro.

Rename files virtex-ii_pro.[ch] to virtex.[ch]
Rename config value VIRTEX_II_PRO to XILINX_VIRTEX
Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

xparameters should not be needed by anything but virtex platform code.
Move it from include/asm-ppc/ to platforms/4xx/xparameters/

This is preparing for work to remove xparameters from the dependancy tree
for most c files.  xparam changes should not cause a recompile of the world.
Instead, drivers should get device info from the platform bus (populated
by the boot code)
Signed-off-by: NGrant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When a cpu is hotplug-onlined, if we don't set per_cpu(last_jiffy) to
something sane, timer_interrupt will execute its while loop for every
tick missed since the cpu was last online (or since the system was
booted, if we're adding a new cpu).  This can cause weird hangs, ssh
sessions dropping, and we can even go xmon if we take a global IPI at
the wrong time.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We call unregister_vpa but we don't check to see if the hypervisor
supports this.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NAnton Blanchard <anton@samba.org>
--
 arch/powerpc/platforms/pseries/setup.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Updated SOC node definition in documentation to include bus-frequency
property. Also extended mdio example to match specification.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@gate.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since 404849bb we've been using
LOAD_REG_ADDRBASE, which uses the toc pointer, in decrementer_iSeries_masked.

This can explode if we take the decrementer interrupt while we're in a module,
because the toc pointer in r2 will be the module's toc pointer.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The code to mark a page as icache dirty (so that it will later be
icache-dcache flushed when we try to execute from it) is duplicated in
three places: flush_dcache_page() does this marking and nothing else,
but clear_user_page() and copy_user_page() duplicate it, since those
functions make the page icache dirty themselves.

This patch makes those other functions call flush_dcache_page()
instead, so the logic's all in one place.  This will make life less
confusing if we ever need to tweak the details of the the lazy icache
flush mechanism.

 arch/powerpc/mm/mem.c |   14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Checking a pointer for NULL before passing it to kfree is pointless, kfree
does its own NULL checking of input.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/kernel/udbg_16550.c: In function `udbg_init_maple_realmode':
arch/powerpc/kernel/udbg_16550.c:162: warning: assignment from incompatible pointer type
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

setup_peg2 must do some refcounting.
of_get_pci_address may need to drop the node

	Pegasos l2cr : L2 cache was not active, activating
	PCI bus 0 controlled by pci at 80000000
	Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32
	Call Trace:
	[C037BD00] [C0007934] show_stack+0x5c/0x184 (unreliable)
	[C037BD30] [C000E068] program_check_exception+0x184/0x584
	[C037BD90] [C000F5F0] ret_from_except_full+0x0/0x4c
	--- Exception: 700 at kref_get+0xc/0x24
	    LR = of_node_get+0x24/0x3c
	[C037BE50] [C004FD94] __pte_alloc_kernel+0x64/0x80 (unreliable)
	[C037BE70] [C000CA18] of_get_parent+0x34/0x58
	[C037BE90] [C0009B18] of_get_address+0x24/0x174
	[C037BED0] [C000A108] of_address_to_resource+0x24/0x68
	[C037BF00] [C038B128] chrp_find_bridges+0x114/0x470
	[C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c
	[C037BFB0] [C03849B0] setup_arch+0x144/0x188
	[C037BFD0] [C037C45C] start_kernel+0x34/0x1a8
	[C037BFF0] [000037A0] 0x37a0
	Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32
	Call Trace:
	[C037BC90] [C0007934] show_stack+0x5c/0x184 (unreliable)
	[C037BCC0] [C000E068] program_check_exception+0x184/0x584
	[C037BD20] [C000F5F0] ret_from_except_full+0x0/0x4c
	--- Exception: 700 at kref_get+0xc/0x24
	    LR = of_node_get+0x24/0x3c
	[C037BDE0] [00000000] 0x0 (unreliable)
	[C037BE00] [C000CA18] of_get_parent+0x34/0x58
	[C037BE20] [C0009CE8] of_translate_address+0x2c/0x2fc
	[C037BEA0] [C0009FE8] __of_address_to_resource+0x30/0xc4
	[C037BED0] [C000A130] of_address_to_resource+0x4c/0x68
	[C037BF00] [C038B128] chrp_find_bridges+0x114/0x470
	[C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c
	[C037BFB0] [C03849B0] setup_arch+0x144/0x188
	[C037BFD0] [C037C45C] start_kernel+0x34/0x1a8
	[C037BFF0] [000037A0] 0x37a0
	PCI bus 0 controlled by pci at c0000000
	Top of RAM: 0x10000000, Total RAM: 0x10000000
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

remove pointer/integer confusion
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use generic_calibrate_decr to restore missing clock: speed in /proc/cpuinfo
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

remove pointer/integer confusion
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It's possible for prom_init to allocate the flat device tree inside the
kdump crash kernel region. If this happens, when we load the kdump kernel we
overwrite the flattened device tree, which is bad.

We could make prom_init try and avoid allocating inside the crash kernel
region, but then we run into issues if the crash kernel region uses all the
space inside the RMO. The easiest solution is to move the flat device tree
once we're running in the kernel.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It turns out that we can't stop the watchdog from
triggering here.  If we touch the timer (which just uses the current jiffie
value) before we enable interrupts, it does nothing because jiffies
are not mass-updated until after we enable interrupts.  If we touch the
timer after we enable interrupts, its too late because the softlockup
watchdog will already have triggered.  The touch_softlockup_watchdog
call removed below does nothing.
Signed-off-by: NDave Boutcher <sleddog@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We need to prod everyone here since this is the only CPU that is
guaranteed to be running after the ibm,suspend-me RTAS call returns.
Signed-off-by: NDave Boutcher <sleddog@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Correctly return the status from the RTAS call.  rtas_call expects
to return the status as a return value.
Signed-off-by: NDave Boutcher <sleddog@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/kernel/rtas.c is getting hvcall.h via spinlock.h, but when we're
building for UP we don't include spinlock.h.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This addresses two items, which are unlikely to be hit if we
trust drivers.

The first is moving a memory barrier below where the vmerged SG count
is passed back, but before the list is set to end.  If those
instructions were reordered, there could be an issue in iommu_unmap_sg().

The second is making sure we terminate the list on the failure case of
iommu_map_sg().  If a driver does not look at the failure return code,
it could pass a ill-formed SG list to iommu_unmap_sg().
Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

You can't boot a kdump kernel via OF, not reliably anyway, the kernel being at
32 MB conflicts with the zImage wrapper etc. and it blows up.

It's trivial to check in prom_init though, and this is early enough that we can
actually drop back to OF where a reset-all will get you going again, which is
kinda nice. I think this should go in for 2.6.16.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

To prevent problems later in boot, make sure we don't create zero-size lmb
regions.

I've checked all the callers, and at the moment no one should ever hit this.
All callers use a constant size, or they check the computed size before they
call us.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In prom.c we run finish_node() on allnodes twice. The first time we just
calculate how much memory we'll need, the second time we do the actual work.

If the calculation stage determines that we need 0 bytes, then we should skip
the lmb allocation. Although an alloc of zero will work, it has been seen to
lead to a BUG_ON() in reserve_bootmem() on at least one machine.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The last two 8MB TLB entries are being incorrectly set by initial_mmu on 8xx.

The first entry is written with the same virtual/physical address, which
renders it invalid:

BDI>rms 792 0x00001e00
BDI>rms 824 1
BDI>rds 824
SPR  824 : 0xc08000c0  -1065353024
BDI>rds 825
SPR  825 : 0xc0800de0  -1065349664
BDI>rds 826
SPR  826 : 0x00000000            0

And the second entry, in addition, does not have its TLB index set
correctly.
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This is a small fix to get the spufs init sequence right.

init_spu_base() in spu_base.c should be called (via
module_init(init_spu_base)) before spufs_init() (via
module_init(spufs_init)) in spufs/inode.c gets called.
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When loading up the FPU, we were using a 'ld' (load doubleword)
instruction to get the FP exception mode from the thread_struct,
but it's only an int field.  This changes the ld to lwz (load
word and zero-extend).
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I thought we had fixed up all non-gpl USB drivers, and was wrong to do
this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The non-NUMA case would do an unmatched "free_alien_cache()" on an alien
pointer that had never been allocated.

It might not matter from a code generation standpoint (since in the
non-NUMA case, the code doesn't actually _do_ anything), but it not only
results in a compiler warning, it's really really ugly too.

Fix the compiler warning by just having a matching dummy allocation.
That also avoids an unnecessary #ifdef in the code.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On a system where libintl.h is present, but the NLS functionality is
supplied by a separate library instead of the system C library, an attempt
to "make config" or "make menuconfig" will fail with link errors, ex:

  scripts/kconfig/mconf.o:mconf.c:(.text+0xf63): undefined reference to
    `_libintl_gettext'

This patch attempts to correct the problem by detecting whether or not NLS
support requires linking with libintl.
Signed-off-by: NSamuel J Robb <sam.robb@timesys.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Due to the usage of set_64bit in include/asm-i386/pgtable-3level.h,
HIGHMEM64G must depend on X86_CMPXCHG64.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix gcc4.1 compile warnings "value computed is not used" with
set_current_state() and set_task_state() on i386/SMP and x86-64.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Show first field of kernel version in register dumps like x86_64 does.

Changes output from e.g.:
	(2.6.16-rc1)
to:
	(2.6.16-rc1 #12)
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>