- 16 4月, 2008 6 次提交
-
-
由 Pavel Emelyanov 提交于
I.e. replace init_net stubs in ip_route_output_key() calls. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Just move all the hashes on the sit_net structure and patch the rest of the code appropriately. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Replace introduced in the previous patch init_net stubs with the proper net pointer. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
| net/ipv6/sit.c:382:42: warning: Using plain integer as NULL pointer Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 03 4月, 2008 5 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Both are identical, let's create ipv6_chk_prefix() and use it in both places.
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
To protect PRL list, use ipip6_lock. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Templin, Fred L 提交于
This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: NFred L. Templin <fred.l.templin@boeing.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 06 3月, 2008 1 次提交
-
-
由 Daniel Lezcano 提交于
Add an netns parameter to ip6_route_output. That will allow to access to the right routing table for outgoing traffic. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2008 1 次提交
-
-
由 Daniel Lezcano 提交于
Add a network namespace parameter to rt6_lookup(). Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 2月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a pre-defined name for a device from the userspace. Since these drivers call the register_netdevice() (rtnl_lock, is held), which does _not_ generate the device's name, this name may contain a '%' character. Not sure how bad is this to have a device with a '%' in its name, but all the other places either use the register_netdev(), which call the dev_alloc_name(), or explicitly call the dev_alloc_name() before registering, i.e. do not allow for such names. This had to be prior to the commit 34cc7b, but I forgot to number the patches and this one got lost, sorry. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
Use the added dev_alloc_name() call to create tunnel device name, rather than iterate in a hand-made loop with an artificial limit. Thanks Patrick for noticing this. [ The way this works is, when the device is actually registered, the generic code noticed the '%' in the name and invokes dev_alloc_name() to fully resolve the name. -DaveM ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 3 次提交
-
-
由 Denis V. Lunev 提交于
Needed to propagate it down to the ip_route_output_flow. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fred L. Templin 提交于
This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: NFred L. Templin <fred.l.templin@boeing.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2007 1 次提交
-
-
由 Chuck Lever 提交于
In some places, the result of skb_headroom() is compared to an unsigned integer, and in others, the result is compared to a signed integer. Make the comparisons consistent and correct. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 2 次提交
-
-
由 Ralf Baechle 提交于
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 7 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Arnaldo Carvalho de Melo 提交于
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
skb_push updates and returns skb->data, so we can just call skb_reset_network_header after the call to skb_push. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2007 1 次提交
-
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Kazunori MIYAZAWA 提交于
This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
There was no real useful information from the unregister_netdevice() return code, the only error occurred in a situation that was a driver bug. So change it to a void function. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 2 次提交
-
-
由 Adrian Bunk 提交于
This patch makes two needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
It would be nice to keep things working even with this built as a module, it took me some time to realize my IPv6 tunnel was broken because of the missing sit module. This module alias fixes things until distributions have added an appropriate alias to modprobe.conf. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2006 1 次提交
-
-
由 Jan Dittmer 提交于
This is missing the MODULE_LICENSE statements and taints the kernel upon loading. License is obvious from the beginning of the file. Signed-off-by: NJan Dittmer <jdi@l4x.org> Signed-off-by: NJoerg Roedel <joro-lkml@zlug.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2006 1 次提交
-
-
由 Joerg Roedel 提交于
This patch removes the driver of the IPv6-in-IPv4 tunnel driver (sit) from the IPv6 module. It adds an option to Kconfig which makes it possible to compile it as a seperate module. Signed-off-by: NJoerg Roedel <joro-lkml@zlug.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
Now that we always zero the IPCB->opts in ip_rcv, it is no longer necessary to do so before calling netif_rx for tunneled packets. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-